I wasn't going to upvote because, the image preview trickery with all the planes surrounding your build. I felt cheated because, I wanted your plane with all the planes flying around it. Though, after flying it, I had fun with it so it made me happy.
@Kleesmilie Exactly.
So in the script change the "1500" to how many meters you need to shut down to still maintain your lift.
AutoThrottle: Activate3 & TargetSelected & TargetDistance < 1500 ? 0 : clamp(Throttle, 0 ,1)
@SnoWFLakE0s
How do you find out what's new for Funky Trees? I never see any announcements about it. I have your FT GUIDE bookmarked and use it quite often. That's the only information on it I check out anymore. Because, it was so well written. Just like a technical manual. Easy reading ;) I never could read fiction. Though, give me a technical manual and I can sit there all day.
Another question. Did you add in your functions and variables inside SimplePlanes or did you do it in an XML editor?
Here is the PLANE I built that auto-lands on carrier.
1. Full throttle (Doesn't really matter but, why go slow?)
2. Be in range of the carrier (~9miles)
3. Select "Ground Target'
4. Activate 3
Watch the green aiming line to try and keep your heading lines up with the runway. Yaw works well like I said.
@OrderlyHippo
I don't try to use any cruise control. I set it up so that the throttle gets killed just before it reaches the carrier. That way it slows enough and the engine is shut down when it lands.
It's kind of Ghetto method but, it works perfectly.
Here's the AutoThrottle code - Activate3 & TargetSelected & TargetDistance < 1500 ? 0 : clamp(Throttle, 0 ,1)
The main thing is to have the proper glide slope. I had a few ways I did this but, they all pretty much came out the same in results. It ended being a balance of speed and pitch.
Auto Roll Leveling: TargetSelected ? RollAngle/90 + clamp(Roll, -0.35, 0.35) : clamp(Roll, -0.35, 0.35)
On to the automatic cruise control... Using a formula for PID works great. Though, I swear I saw other methods that worked better. When I actually get a chance I will take a look.
If you aren't already using SnowFlakeos Funky Tree guide here it is GUIDE
Never heard of "JETT" fuel. LOL
I have a build I have been waiting to release which basically autolands on the carrier. All you have to do is maintain your bearing and the YAW is easy to work. EVERYTHING is done for you after you activate AUTOLAND.
@DrenasPort Thank you for taking the correction well. I didn't mean it to come off in a negative manner at all. Just like making sure people know about Funky Trees and what it really is. Because, it is such an awesome addition to SP. I have built a plane that auto lands on the carrier due to it.
That is not an example of FUNKY TREES so why label it as such? It's an XML edit.
FUNKY TREES is a stripped down programing using "INPUT" selections of parts.
@B8X2 Actually, I answered that without thinking. You should be joining "ROOM 0". If you didn't then you are not connected. If you are not seeing anyone, that is because, there is NO ONE online.
@ELGATOGAMEPLAYS
RollRate The rate at which the aircraft rolls (deg/s) (-inf~inf)
https://snowflake0s.github.io/funkyguide/
Use this. It's an updated and complete guide
@SnoWFLakE0s I was wondering why you are so brilliant. I was going to ask what you do for work. Then I read your BIO. Now, I see you are an aspiring Civil Engineer. I am so glad we have such an intelligent person like you in the engineering field. Thank you for being you. Keep it humble in life but, know you are appreciated by so many and so many more wish they had your talent and intellectual ability.
@PlanariaLab I hate to chime in but, whenever I save as a sub-assembly the HUD doesn't work as it did from your original build. Heading disappears, no Roll/attitude lines. Do you know what is causing this? I thought it may be due to the wrong attachment point but there is only one in text boxes. Also, I changed nothing to be sure I didn't cause any changes which would have made this occur.
Watch movies in English with the subtitles on. If your primary language is not English then you will need to remove yourself from listening and speaking your native tongue. You need to push yourself anywhere and everywhere. That will be the quickest way. Also, if you are corrected by others who speak English as their native tongue. Listen to them, they are trying to get you to that next level. My wife refuses to drop her french accent ever. I just once would like to hear her say a sentence without the accent. I am just curious.
@AndrewGarrison, @WNP78
I will post this to the bug report.
I tried switching to the BETA and it won't launch. Yes, I followed what I could on the Steam support article.
You do not have permission to open the application “SimplePlanes”. Contact your computer or network administrator for assistance.
Failed to start process for SimplePlanes :
OS Error 4294956470
See the Steam support site for more information
@SimplyPlain Honestly, this build is deserves more upvotes than the highest rated builds. It just is that good. More spotlights need to be made on it. I think this plane is a perfect example to be used as a stock plane for the new VR update coming. IDK if you really know how realistic it is when you takeoff and land. But, it really is.
What a top notch aircraft! Seriously!!! Holy cow man it flies like a dream, lands like a dream. It has probably the most realistic takeoff, handling, and landing of all aircraft I have ever tried on SP in 5.8 yrs of playing this game. Truly and award winning accomplishment. Beautiful build as much as it's flying characteristics.
@Person05 Well, then we should never talk about anything but, builds if that's the case. Oh wait! Yup, people talk about everything on here until it triggers some fake woke wannabe. Plus if you read the original statement I made you would know it was a joke and actually funny corny humor.
@RC1138Boss I know you were, I just hate when things get relabeled and then turn into some mess they shouldn't have been. BTW, what does Afghanistan have to do with paying more at the pump? We don't get oil from them
@RC1138Boss Hate to have to be the one to tell you but, nothing I said relates to politics. You might want to open a dictionary and review the definition of politics. Talking about something that relates to a private industry has nothing to do with politics. Even though there has been some serious focus today on politics don't be that person who runs around screaming "POLITICS" like all the fools who call everything racist. Take that fake woke crap elsewhere.
@JuanNotAnAlt WHy am I a bum? Because, I don't like paying $.15+ a gallon just so we can depend on other nations for our fuel. Because, if you think we will reach independence from oil anytime soon you are fooling yourself. It's wishful thinking because, politicians only feed you what you want to hear. When the real truth is BIG OIL feeds their wallets to make sure that never happens.
Must be nice to get an upvote from Andrew!
+1@ChubbmasterTheFirst 157.7.214.47
I wasn't going to upvote because, the image preview trickery with all the planes surrounding your build. I felt cheated because, I wanted your plane with all the planes flying around it. Though, after flying it, I had fun with it so it made me happy.
Reported due to violation of not crediting the creator and making an exact copy of their work
@SuperSabre1945 The guy who advertises on others posts and doesn't upvote them. 🙄
@AviationCat007 @Potkuri
Thanks. Totally slipped my mind. I have updated it now.
@Kleesmilie Exactly.
+1So in the script change the "1500" to how many meters you need to shut down to still maintain your lift.
AutoThrottle: Activate3 & TargetSelected & TargetDistance < 1500 ? 0 : clamp(Throttle, 0 ,1)
Imagine getting 72 upvotes in 8 hrs.
@SnoWFLakE0s
How do you find out what's new for Funky Trees? I never see any announcements about it. I have your FT GUIDE bookmarked and use it quite often. That's the only information on it I check out anymore. Because, it was so well written. Just like a technical manual. Easy reading ;) I never could read fiction. Though, give me a technical manual and I can sit there all day.
Another question. Did you add in your functions and variables inside SimplePlanes or did you do it in an XML editor?
@VRCollective Did you bother reading the Description?
complete with full VR compatibility
🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯
@PPLLAANNEE Well I do have multiple, one on each side pulling the same thing. It's a crossbow. I got it to work but, not exactly how I want.
@OrderlyHippo
Here is the PLANE I built that auto-lands on carrier.
1. Full throttle (Doesn't really matter but, why go slow?)
2. Be in range of the carrier (~9miles)
3. Select "Ground Target'
4. Activate 3
Watch the green aiming line to try and keep your heading lines up with the runway. Yaw works well like I said.
+1@OrderlyHippo
I don't try to use any cruise control. I set it up so that the throttle gets killed just before it reaches the carrier. That way it slows enough and the engine is shut down when it lands.
It's kind of Ghetto method but, it works perfectly.
Here's the AutoThrottle code - Activate3 & TargetSelected & TargetDistance < 1500 ? 0 : clamp(Throttle, 0 ,1)
The main thing is to have the proper glide slope. I had a few ways I did this but, they all pretty much came out the same in results. It ended being a balance of speed and pitch.
Pitch: TargetSelected ? clamp(PitchAngle* 0.011, -1, 1) : 0 + clamp(Pitch, -0.35, 0.35)
AutoThrottle: Activate3 & TargetSelected & TargetDistance < 1500 ? 0 : clamp(Throttle, 0 ,1)
Auto Roll Leveling: TargetSelected ? RollAngle/90 + clamp(Roll, -0.35, 0.35) : clamp(Roll, -0.35, 0.35)
On to the automatic cruise control... Using a formula for PID works great. Though, I swear I saw other methods that worked better. When I actually get a chance I will take a look.
+2If you aren't already using SnowFlakeos Funky Tree guide here it is
GUIDE
Never heard of "JETT" fuel. LOL
I have a build I have been waiting to release which basically autolands on the carrier. All you have to do is maintain your bearing and the YAW is easy to work. EVERYTHING is done for you after you activate AUTOLAND.
@V None = 0 The system automatically changes it to none. It's just faster to type "0" when exiting the XML.
You said not to worry and ignore the pressure warning. I think you tricked us. The vessel was destroyed below 400m. Love the build
+1@Striderxxl I figured it was the webhost
All of your images "Can't be found" you added.
@DrenasPort Thank you for taking the correction well. I didn't mean it to come off in a negative manner at all. Just like making sure people know about Funky Trees and what it really is. Because, it is such an awesome addition to SP. I have built a plane that auto lands on the carrier due to it.
+1That is not an example of FUNKY TREES so why label it as such? It's an XML edit.
FUNKY TREES is a stripped down programing using "INPUT" selections of parts.
Here's the guide on it
+1How does it work? Does it work by eliminating the connected part so the color underneath is exposed? If so, that's brilliant!
+1Looks like someone got bored LOL
+1中国再次窃取他国技术
You make something out of it
no
+1@birb26
This has been answered in the description. Look at the bottom of the description...
"Joined Room other than 0 (Game will display a random number such as "898789".)
Fix - Close SP and restart game. "
@B8X2 Actually, I answered that without thinking. You should be joining "ROOM 0". If you didn't then you are not connected. If you are not seeing anyone, that is because, there is NO ONE online.
@B8X2
Try uninstalling the MP mod and re-downloading it. Then re-install and try again.
@ELGATOGAMEPLAYS
RollRate The rate at which the aircraft rolls (deg/s) (-inf~inf)
https://snowflake0s.github.io/funkyguide/
Use this. It's an updated and complete guide
clamp01(Activate5) * (clamp(((PitchAngle+ -3)/5), -1, 1))-(clamp01(Activate5) * clamp((((AltitudeAgl / 10)* (-1))+1.8), 0, 1.6)* clamp01(((AltitudeAgl) * (-1))+(20)))), -1, 1.5) / 3) + (Pitch / 2)
SYNTAX ERROR
I love how the engines gauges ramp up and roll back. Looks like the real deal.
+3@SnoWFLakE0s I was wondering why you are so brilliant. I was going to ask what you do for work. Then I read your BIO. Now, I see you are an aspiring Civil Engineer. I am so glad we have such an intelligent person like you in the engineering field. Thank you for being you. Keep it humble in life but, know you are appreciated by so many and so many more wish they had your talent and intellectual ability.
+3@PlanariaLab I hate to chime in but, whenever I save as a sub-assembly the HUD doesn't work as it did from your original build. Heading disappears, no Roll/attitude lines. Do you know what is causing this? I thought it may be due to the wrong attachment point but there is only one in text boxes. Also, I changed nothing to be sure I didn't cause any changes which would have made this occur.
BTW Amazing build!!!
BUG HAS BEEN RESOLVED
@PhilipTarpley No, thank you all for SP and the additions!!! Everything that can go wrong will. Oh and yes it's working!!!! THANK YOU!!!!
+1@zAerospace Thank you!!! I felt alone. Oh and I submitted a bug report on it
Watch movies in English with the subtitles on. If your primary language is not English then you will need to remove yourself from listening and speaking your native tongue. You need to push yourself anywhere and everywhere. That will be the quickest way. Also, if you are corrected by others who speak English as their native tongue. Listen to them, they are trying to get you to that next level. My wife refuses to drop her french accent ever. I just once would like to hear her say a sentence without the accent. I am just curious.
+1@TheNightmareCompany That server is no longer on the list. Try the Japan or Germany server on the list
@AndrewGarrison, @WNP78
I will post this to the bug report.
I tried switching to the BETA and it won't launch. Yes, I followed what I could on the Steam support article.
You do not have permission to open the application “SimplePlanes”. Contact your computer or network administrator for assistance.
+4Failed to start process for SimplePlanes :
OS Error 4294956470
See the Steam support site for more information
Man I bet there was an entire aircrew which, needed new underwear after that ride from hell.
So, who's the FF behind him headed into the battle of his life?
+1@Coolman1000 as of SEP 6th 2021 @ 4:37 EST (1637) 157.7.214.47 Japan server is up and working as intended.
@SimplyPlain Honestly, this build is deserves more upvotes than the highest rated builds. It just is that good. More spotlights need to be made on it. I think this plane is a perfect example to be used as a stock plane for the new VR update coming. IDK if you really know how realistic it is when you takeoff and land. But, it really is.
+1@Parehare Undo and then redo after downloading (this allows you to use the aircraft without mods)
What a top notch aircraft! Seriously!!! Holy cow man it flies like a dream, lands like a dream. It has probably the most realistic takeoff, handling, and landing of all aircraft I have ever tried on SP in 5.8 yrs of playing this game. Truly and award winning accomplishment. Beautiful build as much as it's flying characteristics.
+2@Person05 Well, then we should never talk about anything but, builds if that's the case. Oh wait! Yup, people talk about everything on here until it triggers some fake woke wannabe. Plus if you read the original statement I made you would know it was a joke and actually funny corny humor.
@RC1138Boss I know you were, I just hate when things get relabeled and then turn into some mess they shouldn't have been. BTW, what does Afghanistan have to do with paying more at the pump? We don't get oil from them
@RC1138Boss Hate to have to be the one to tell you but, nothing I said relates to politics. You might want to open a dictionary and review the definition of politics. Talking about something that relates to a private industry has nothing to do with politics. Even though there has been some serious focus today on politics don't be that person who runs around screaming "POLITICS" like all the fools who call everything racist. Take that fake woke crap elsewhere.
@JuanNotAnAlt WHy am I a bum? Because, I don't like paying $.15+ a gallon just so we can depend on other nations for our fuel. Because, if you think we will reach independence from oil anytime soon you are fooling yourself. It's wishful thinking because, politicians only feed you what you want to hear. When the real truth is BIG OIL feeds their wallets to make sure that never happens.
+1