I encourage independant suspension, but it isnt crucial. If you dont have your own suspension setup, then at least enable suspension on the wheels. Low mass, spoiler, street tires. If you want a drfiter, set the rear tires to have low sideways grip. If you want something to turn at high speeds easily, set front sideways grip to something high but less than the rear. Hope this helps @BaconRoll
@Cadillace i deleted 500. I know its still a lot, but it was painful to delete any. I was just trying to delete unnecessary parts to help it run a little faster
Happy to help. You should also try dual wishbone independant suspension so the wheel goes straight up and down. Have a look here to see what i mean. Actually you should have a look at all my suspension if you want to get some ideas. @kaleson18
You can build one from umart with a 4.0ghz 10 core i7 cpu, two liquid cooled gtx1080ti's, two 10TB harddrives, two 2TB SSD's, 3 4k 240hz monitors and heaps of other kool stuff for AU$23000 or around US$18000
Probably against apple policy
Woah, what camera you use?
Thanks @KSPFSXandSP
Noice
That one @Aarons123
That one @Aarons123
That one
I know how useful it is for all my non-racers. Had no idea it was allowed @ABC123
Its under the ice base at sea level in a cave @EpicPigster1
+1I assume you know about avalanche
Undermountain docking bay under the ice base
Woah
Noice
You mean its allowed now? @ABC123
Trainy McTrainface
Congratulations. You beat me
Surprisingly @Kerbango
Thanks @phanps
Giant deadly chickens from skyrim that chase you in the sky
Thanks @randomusername
Thanks @BogdanX
nice. Simple but still retaining functionality and looks!
I encourage independant suspension, but it isnt crucial. If you dont have your own suspension setup, then at least enable suspension on the wheels. Low mass, spoiler, street tires. If you want a drfiter, set the rear tires to have low sideways grip. If you want something to turn at high speeds easily, set front sideways grip to something high but less than the rear. Hope this helps @BaconRoll
+1@Cadillace i deleted 500. I know its still a lot, but it was painful to delete any. I was just trying to delete unnecessary parts to help it run a little faster
I just want to get into the third or fourth round @Alienbeef0421
Neither am i. Mine was built in 10 min. 30 if you include testing and finetuning @Alienbeef0421
@Alienbeef0421 nice. For once im actually slightly faster than you. 34 sec with this
What times are you getting with this on airstrip drag?
Is this for a tournament? Or a street car? Or an offroad car? Because there's similar but different answers for all of them
Happy to help. You should also try dual wishbone independant suspension so the wheel goes straight up and down. Have a look here to see what i mean. Actually you should have a look at all my suspension if you want to get some ideas. @kaleson18
bloody hell. wut did you do?
Thanks @Aeroman77 and @helilover3
you need a hinge at both ends of the spring. The wishbones may also be too close to other blocks and the could be accidentally joining
I know dem feelz. Sukz wen mah cur dis meh
Oh s$&t waddup @phanps
Hmmm... you make me want to build an airliner now.
Ps, i kinda just want to fit in a little bit in MP
Gnarly dude
Back to reality, the gt9600 in my computer can be bought for $30 nowadays. And i have a $30 raspberry pi v2 or v3
Or you could get a raspberry pi v1 for 10bucks secondhand
You can build one from umart with a 4.0ghz 10 core i7 cpu, two liquid cooled gtx1080ti's, two 10TB harddrives, two 2TB SSD's, 3 4k 240hz monitors and heaps of other kool stuff for AU$23000 or around US$18000
Thanks @phanps
And are you guys actually serious?
Since i dont really care very much, you can have this on your side
On another note, i wont be aboe to run it on my computer :( way too much detail in the supercharger
Oooohhhh the nice suspension and engine
heavy breathing
its only sad if you cant think of an answer to it
Thanks! @ MadBomber you got me to 7K!
noice
nice