use your overload to change the weight (0.0) and fuel level of a single can. (999999999) and the save it in your subassembly then you won’t have to build with gas tanks.
@WritersCrusadersAirCo I can. You can try it your self.
or:
send me a link to a picture, or take a screen shot of what you want, upload it to a photosharing service, then send me that link. not too big though or it lags moving vehicles.
@ComradeInCommune edited...I found this, , I am about to read it for my own education, not that I am going to be a comedian. But I find myself telling lots of "dad-jokes".
What kind of mac? if you have a keyboard,
shift-command-3 takes a screenshot.
shift-command-4 takes a selected screenshot.
shift-command-5 takes a ten second video.
@NEOCORP If you want me to do it: I need pictures or http address of what you want. And you might want to do it yourself so you can edit the shape of the picture to fit the shape of whatever you need to put it on.
so,
If you want to do it yourself: Step by step instructions
@XtarsTheExdarichGuy33106 sure why not?
it's only 300 cubits long, 50 cubits wide, and 30 cubits high.
or if you don't wanna do it the olden way:
450 x 75 x 45 in feet, or 135 x 23 x 14 in meters
And then there are some saying it was even bigger 510 feet long.
As you can see in my profile, I use a freeform method where I Start from a piece, or even a shape and sort of make it into something. Here's an Example where i started with just a fender...
@KenzarAircraft click on my profile, click on posts, click on the forum post that says, pictures into labels.
and while you are in my posts take any of my hundreds of posts for a test run.
@72 I need a picture of "my SAIA roundel (you can find it on my planes, basically a red circle, a smaller blue one and an even smaller dark green one)" the others are HERE
hi, This might please you.
@Majakalona click Say my Name!
+1Guy in his underwear will be supplied by the player.
+2@WritersCrusadersAirCo I can.
+1You can try it your self.
or:
send me a link to a picture, or take a screen shot of what you want, upload it to a photosharing service, then send me that link. not too big though or it lags moving vehicles.
@ComradeInCommune edited...I found this, , I am about to read it for my own education, not that I am going to be a comedian. But I find myself telling lots of "dad-jokes".
@ComradeInCommune 🤪😁🤣Dude, look at my profile posts...I can take and make a joke.
Yes, I know, this one is barely a pun.
@ComradeInCommune Look again, the name is not mis-spelled. 😀
@001 I believe this would be in the murder drone category.
+1For the future
So....did you survive and prosper?
+1Looks Familiar.
@Graingy Super.
+1Sweet Googly Moogly!
What kind of mac? if you have a keyboard,
shift-command-3 takes a screenshot.
shift-command-4 takes a selected screenshot.
shift-command-5 takes a ten second video.
@TimsonAviation @Graingy I am 100% positively certainly sure that this is getting old.
@DJAirlines You gave me two pictures that DO NOT contain the letter D.
Crop what you want and post the cropped picture, send me the link. or put the link into https://www.simpleplanes.com/Forums/View/1863836/pictures-into-Label-Stickers
@DJAirlines Okay. Then how about This?
@DJAirlines Do you mean This?
I like stupid!
@skely it's a fun ride. so is my simpsons one.
@NEOCORP If you want me to do it: I need pictures or http address of what you want. And you might want to do it yourself so you can edit the shape of the picture to fit the shape of whatever you need to put it on.
so,
If you want to do it yourself: Step by step instructions
This guy might have what you need.
+1Good job all.
+1heya, through the course of Succession.
How many times did it take to get the Delorean turn gif (on your profile page) just right? Cause it looks really close. Really, really close!😲😲😲
but of course, tagging is really unnecessary.....
@Sm10684 oh my, no credit necessary. just tag me to let me see what ya did.
@HanakoSan indeed you did. 😃
+1OMG, that just sent me down a Rabbit hole.....
+2Pun intended.
@Graingy I like to Synonym at people.
@Graingy Astonished, Appalled, Bewildered, Dumbfounded, Horrified, Stunned, Startled, Surprised.
but, uploads are "paused"....😵💫
+1@XtarsTheExdarichGuy33106 sure why not?
+1it's only 300 cubits long, 50 cubits wide, and 30 cubits high.
or if you don't wanna do it the olden way:
450 x 75 x 45 in feet, or 135 x 23 x 14 in meters
And then there are some saying it was even bigger 510 feet long.
Wonderful!
+1You score 42 outta 39.75.
Now do a mathematically accurate "Noah's Ark."😮
my 5 Y.O. always tells me she is bored, I say, "I'm Daddy, what kind of board are you? Plywood? Plank? Sheetrock?"
@XtarsTheExdarichGuy33106 Then, this is "With an idea but not so much a plan.🤣
I guess you win the contest,
1st out of one.
As you can see in my profile, I use a freeform method where I Start from a piece, or even a shape and sort of make it into something. Here's an Example where i started with just a fender...
@SebastianL13 choose screenshot in blueprint mode. Adjust to your liking.
@VarisTheWingers Yes, this is a more advanced jet version.
My post is up https://www.simpleplanes.com/a/J1Zh0p/Hyperthrust-Triumphant
@KenzarAircraft click on my profile, click on posts, click on the forum post that says, pictures into labels.
and while you are in my posts take any of my hundreds of posts for a test run.
@72 I need a picture of "my SAIA roundel (you can find it on my planes, basically a red circle, a smaller blue one and an even smaller dark green one)" the others are HERE
https://www.simpleplanes.com/Forums/View/1498184/CAMERA-AIMING
"Using the search function usually yields better results than a forum post." He Says, proving his own dumass wrong.
But I found it in thirty seconds, and you needed to wait for me to see this.
+1@KenzarAircraft here ya go
@VarisTheWingers you have to be higher score than the other person to spotlight. 'tis okay.
What's next? Red apple cigarettes?
+1Now build a glass car around this to showcase it....pwease.
+1🎯🏥