Lol thx it was crazy annoying having to wait like 10 seconds every time I would edit something. And the frequent crashes that wouldnt save my addons to the the craft didn’t help either XD @Noahater5245
i assume that you are talking about how the brakes make the wheels look like Swasticas. I couldn’t really find any other ways that were as efficient. I no way did I intend for it to look like that lol. If you are just talking about the design, it is the most efficeint and reliable way I could find. @PilotOfFuture
Do you mean wouldn’t? Because if so there is a certain way that you have to place the gears so they don’t stick to eachother, plus they’re different types of the same gear that are needed to make it work. (I call the Gear A and Gear B version of a gear). I will post a gear showroom soon that will show all of my gears and tell how to use them.@Genterprizes
I know this post is old, but I am pretty much just going to be treating SR2 like ksp but for mobile so I would like it if it had all the good features from ksp and more.
Well you’d have to be more specific, but I’m pretty sure that tired in Simple Planes don’t collide with eachother, so they wouldn’t really work as a replacement for gears. @Genterprizes
I have absolutely no experience in modding, so idk if I could do that. But there is a mod I believe that has default gears, I’m pretty sure that @LimitedShelf568 is using it here , so maybe ask him about it. @Megaplanesinc
The basis of it all though is the formula I think is from precalculus.
y = (sin(Ø) * r / 2
x = (cos(Ø) * r / 2
Where (x) is the x position of the tooth you are placing, (y) is the y position of the tooth you are placing, (Ø) is the degree of the tooth, and (r) is the radius of the circle. Also the (*) mean multiply and (/) means divide. So yeah that is about as simple as I can make it, I will make a post explaining it more in detail
@LeoTanaka2243
I really liked the advanced turning gear idea, really cool idea and works well. And The gears are kinda complicated to create, so I don’t think I can say everything in the comments. I think I will create a post explaining it @LeoTanaka2243
Yeah, those gears have a rather high part count, and as I said earlier I will try to make a version with smaller gears which will lower padt count, but it will take a while @LimitedShelf568
I have tried, and the only way that I have found so far is via my piston engine “that works like a crank shaft”. I have gotten up to 35 mph, but it is hard to control and cannot throttle the speed, always has to be at 100%. But yeah maybe one day I can make it better we will see lol @Birdman9301
I get what your saying, but I don’t think that that is correct. When it is in 3rd gear (fastest), it goes at about 34 rpm, and 1st gear(slowest), it goes at about 12 rpm. This is expected since first gear has about a1/3 gear ratio while the third gear has about a 3/1 gear ratio, so 3rd gear is expected to be about 3 times slower than first. They do change speeds. @randomusername
What do you mean by increase the diameter? Also, it is gear ratios that make it faster. I make the gyros power a gear with 3 units in diameter, then use that to turn a gear that is 1 unit in diameter the gear ratios make it to where it moves faster. If I want to decrease the speed but increase torque, then I make the gyros power a gear that is 1 unit in diameter, and make it turn a gear with 3 units in diameter.@randomusername
Are you sure? Because I am pretty sure I can see the spin of the gears changing as I switch gears. It is more noticeable if you do it without the clutch, although it may get stuck. @randomusername
It’s actually pretty simple, I just suck at explaining it XD @Kaos
I have posted a gif showing how to connect gears on imgur, the link to it is on my newest post “Gear Showroom”. Hope it helps @Genterprizes
@Chancey21 There ya go friend, enjoy!
I seriously don’t even know @TheTekkit101
This is super creative and just plain awesome! great job.
Sure thing @Chancey21
Sure, I will start putting together a gear showroom now @Chancey21
Thanks! @TheCreatorandDestroyer99
Lol thx it was crazy annoying having to wait like 10 seconds every time I would edit something. And the frequent crashes that wouldnt save my addons to the the craft didn’t help either XD @Noahater5245
Thank you! @EliteArsenals24
Cool hope it works out @AeroEngineering
i assume that you are talking about how the brakes make the wheels look like Swasticas. I couldn’t really find any other ways that were as efficient. I no way did I intend for it to look like that lol. If you are just talking about the design, it is the most efficeint and reliable way I could find. @PilotOfFuture
Do you mean wouldn’t? Because if so there is a certain way that you have to place the gears so they don’t stick to eachother, plus they’re different types of the same gear that are needed to make it work. (I call the Gear A and Gear B version of a gear). I will post a gear showroom soon that will show all of my gears and tell how to use them.@Genterprizes
I know this post is old, but I am pretty much just going to be treating SR2 like ksp but for mobile so I would like it if it had all the good features from ksp and more.
That is a great freakin idea and I hope that you get that chicken into deep space and beyond lol @plane918273645
Yeah sure, just make sure you credit me in the description or something. Good Luck! @armanla777
Well you’d have to be more specific, but I’m pretty sure that tired in Simple Planes don’t collide with eachother, so they wouldn’t really work as a replacement for gears. @Genterprizes
I have absolutely no experience in modding, so idk if I could do that. But there is a mod I believe that has default gears, I’m pretty sure that @LimitedShelf568 is using it here , so maybe ask him about it. @Megaplanesinc
@Jayv210 thanks!
@vtads sorry the uss tiny is huge so I needed a huge craft lol
Haha yeah @Othawne
Thanks! And yes, the gyros are for starting the engine to make sure they go in the right direction @CDRxavier
Yes it should @LeoTanaka2243
+1Yeah I would download if I could but sadly I’m on IOS haha @Othawne
Oh ok cool @Othawne
Description says 80% right? @Othawne
Has trouble if I go above 40%, but still super cool!
Thanks @999999999
Here it is! @sexylips35
Really cool stuff! I have made something similar that is nowhere near as good, and the way you did it is much more efficient and precise, nice job!
+1Ok, also make sure that the center of the gear is at
+1x = 0 and y = 0 so that the teeth get placed in the right place. Good luck! @LeoTanaka2243
The basis of it all though is the formula I think is from precalculus.
y = (sin(Ø) * r / 2
x = (cos(Ø) * r / 2
Where (x) is the x position of the tooth you are placing, (y) is the y position of the tooth you are placing, (Ø) is the degree of the tooth, and (r) is the radius of the circle. Also the (*) mean multiply and (/) means divide. So yeah that is about as simple as I can make it, I will make a post explaining it more in detail
+1@LeoTanaka2243
I really liked the advanced turning gear idea, really cool idea and works well. And The gears are kinda complicated to create, so I don’t think I can say everything in the comments. I think I will create a post explaining it @LeoTanaka2243
+1Yeah, those gears have a rather high part count, and as I said earlier I will try to make a version with smaller gears which will lower padt count, but it will take a while @LimitedShelf568
Ok, but it may not get done for a while cause the small gears will take a long time to build, sorry. @Genterprizes
Hmm I may be able to do that, just have to begin working on smaller gears @Genterprizes
The two parallel gears at the back are meant to put wheels on, but it may be difficult. I’m sorry I didn’t really plan that well@22zxSnakeEyes
I have tried, and the only way that I have found so far is via my piston engine “that works like a crank shaft”. I have gotten up to 35 mph, but it is hard to control and cannot throttle the speed, always has to be at 100%. But yeah maybe one day I can make it better we will see lol @Birdman9301
+1I used the fast infinite rotator here and it went pretty fast but still noticeably made changes in speed when I shifted gears. @randomusername
+1Welc @RYMA232Aeronautics
+1I get what your saying, but I don’t think that that is correct. When it is in 3rd gear (fastest), it goes at about 34 rpm, and 1st gear(slowest), it goes at about 12 rpm. This is expected since first gear has about a1/3 gear ratio while the third gear has about a 3/1 gear ratio, so 3rd gear is expected to be about 3 times slower than first. They do change speeds. @randomusername
+1Thank you @sexylips35
+1What do you mean by increase the diameter? Also, it is gear ratios that make it faster. I make the gyros power a gear with 3 units in diameter, then use that to turn a gear that is 1 unit in diameter the gear ratios make it to where it moves faster. If I want to decrease the speed but increase torque, then I make the gyros power a gear that is 1 unit in diameter, and make it turn a gear with 3 units in diameter.@randomusername
Haha thanks @EliteArsenals24
Oh, well then be my guest haha @Nguyenhuuhao0101
I’m sorry, I don’t understand what you are saying @Nguyenhuuhao0101
Thank you! @Stingray @Fluffysheep
It’s beautiful
+1Are you sure? Because I am pretty sure I can see the spin of the gears changing as I switch gears. It is more noticeable if you do it without the clutch, although it may get stuck. @randomusername
Thanks! @KidKromosone