@SimpleTechAndResearch Plane was created and uploaded before accounts were a thing, then it was moved over to my account after accounts were added and I made mine
The IP address you have provided is only your local area network IP, for people outside your LAN to connect you must provide them with your global IP address
@HackingAnonymous it's definitely not a virus, but if you're not hosting you don't need it.
Unless you've changed the settings (which you probably shouldn't do, for security reasons), Chrome will usually tell you that any unknown executable is potentially malicious.
The IP address you have provided is only you local area network IP, for people outside your LAN to connect you must provide us with your global IP address
@VladCelTroll I would like to try connecting to your server, since I couldn't connect to @oDDDynamics' SP server, and I doubt it was the mod or server's fault since ping requests always timed out, but I would like to confirm whether Hamachi will work.
@oDDDynamics What is the Network ID?
Since the server will only work with LAN, anyone connecting will need to use Hamachi to join your hamachi network, and then use your Hamchi-LAN IP
-name "Your Server" <-- Name your server
-tcp [port] <-- TCP port for clients to connect to
-udp [port] <-- UDP port used for communication
-udpLobby [address] [port] <-- Start or connect to a UDP lobby
-tcpLobby [address] [port] <-- Start or connect to a TCP lobby
-ip [ip] <-- Choose a specific network interface
-service <-- Run it as a service
none of these do anything for me
maybe because none of those are commands.
those are arguments you can pass to the executable when you run it, either by configuring arguments or using CMD
@oDDDynamics explain how it is convoluted.
If the executable is running, you are hosting.
To enter a command in the server, type the command.
To connect to a server, type in the IP address and hit enter.
If UPnP Gateway can't be found, or ports could not open, server will only work for LAN.
@oDDDynamics Also, it might help if you didn't check localhost, unless the server is on the same computer you're running SP on, in which case, you don't need to change them.
@Mod it worked mostly fine for you in your local IP, it just didn't get through ports or UPnP, which I gave instructions in the post for how to handle, though it has not been tested.
@EternalDarkness No, the name tags don't look nearly this good, and number of people that can join is only limited by what the clients and server host can handle (which also depends on number of parts, moving parts, etc).
That said, MP is in a state that you could get all of these screenshots, except that guns/bullets are not synced.
If you'd googled, you'd have seen that MOST people have no trouble with Win10, and plenty of people had trouble before Win10... and you might even find a solution.
It should be possible with ACTUAL modding, just know that iOS can't use real mods, and anyone who wants the new sounds will need to install the mod.
It will also require programming knowledge.
@xXxMLGDOGE603xXx ... maybe because this is a
Mod, where before it was apost.The
Modssections needsMods.@WalrusAircraft Thanks!
@KINTARO Because it is not an airplane, it is a mod
@SimpleTechAndResearch Plane was created and uploaded before accounts were a thing, then it was moved over to my account after accounts were added and I made mine
@EternalDarkness @Sauce @KINTARO you can't upvote your own stuff, this is remaining evidence of a long-since-fixed bug which I reported XD
The IP address you have provided is only your local area network IP, for people outside your LAN to connect you must provide them with your global IP address
Thank you for hosting!
@xplane10 Awesome, great to hear :)
@kukimuki1234 there are no official servers, it's up to users to host them, but right now @FuzzyPickle has got his server up at 72.20.80.236
@HackingAnonymous it's definitely not a virus, but if you're not hosting you don't need it.
Unless you've changed the settings (which you probably shouldn't do, for security reasons), Chrome will usually tell you that any unknown executable is potentially malicious.
In the new Mods section, there's a button "Learn About Modding"
@Dipper Thanks! It's not Win10, since I'm using Win10, but until I track down what it IS, I'll put the command in the main post.
@JMicah4 you could try it, worst that could happen is... the computer explodes destroying the space-time continuum...
@BirdOfSteel 72.20.80.236 <----- this one seems to be up and running with a couple players on it, thanks @FuzzyPickle !!!
@xplane10 @MemeKingIndustriesAndMegaCorporation Latest version, 0.101 should allow you to use LAN when you don't have an actual connection.
@SimpleTechAndResearch Nope, just updated the mod with minor changes
The IP address you have provided is only you local area network IP, for people outside your LAN to connect you must provide us with your global IP address
Thank you for hosting!
@BirdOfSteel Make sure you all agree on where to spawn, and turn on
air-to-air targetingIt is also recommended that you also set AI traffic to
none.@MemeKingIndustriesAndMegaCorporation people with a LAN, usually have actual internet access as well.
@xplane10 crud, didn't think about people playing on just LAN without actual internet access, I'll get an update out soon so you can play like that.
@FuzzyPickle That is your local IP, if you want people to connect they need your global IP address, which you can get by googling "what is my IP"
@BirdOfSteel What @Mod said AFTER you type the IP into the IP Address box
@oDDDynamics I can try tunngle.
@VladCelTroll I would like to try connecting to your server, since I couldn't connect to @oDDDynamics' SP server, and I doubt it was the mod or server's fault since ping requests always timed out, but I would like to confirm whether Hamachi will work.
@oDDDynamics What is the Network ID?
Since the server will only work with LAN, anyone connecting will need to use Hamachi to join your hamachi network, and then use your Hamchi-LAN IP
@oDDDynamics @Mod was not running hamchi and connected to your fake-LAN.
I'm currently setting up hamachi.
@oDDDynamics
maybe because none of those are commands.
those are arguments you can pass to the executable when you run it, either by configuring arguments or using CMD
@oDDDynamics explain how it is convoluted.
If the executable is running, you are hosting.
To enter a command in the server, type the command.
To connect to a server, type in the IP address and hit enter.
If UPnP Gateway can't be found, or ports could not open, server will only work for LAN.
@oDDDynamics to use a server command... type it... and hit enter...
for example, to ban someone with IP address 127.0.0.1, type
ban 127.0.0.1and hit enter.@oDDDynamics YOU ARE LITERALLY HOSTING after the exe is done spitting messages at you.
@oDDDynamics Also, it might help if you didn't check localhost, unless the server is on the same computer you're running SP on, in which case, you don't need to change them.
@oDDDynamics literally all you need to do to USE the executable is run it as listed.
The listed commands work fine, if they're not working you're doing something wrong.
If you provide screenshots maybe I can tell you what you're doing wrong.
@Mod it worked mostly fine for you in your local IP, it just didn't get through ports or UPnP, which I gave instructions in the post for how to handle, though it has not been tested.
@oDDDynamics
Literally everything you could possibly need to know is listed.
@ViciousTNT Not any time soon, Android may not even be able to handle it, and there are plenty of things to fix on PC first.
@RhysBrown read the section "TO HOST A SERVER"
@MindWarehouse ... click the download button for "PC/Mac"...
@MechWARRIOR57 doesn't seem to be an Android download anywhere.
@MechWARRIOR57 it's on the Steam Workshop.
@SuperSanic iOS version of SimplePlanes does not support mods because of Apple's policy, so no.
@Johndfg Gato did not exist as a SimplePlanes player.
@EternalDarkness No, the name tags don't look nearly this good, and number of people that can join is only limited by what the clients and server host can handle (which also depends on number of parts, moving parts, etc).
That said, MP is in a state that you could get all of these screenshots, except that guns/bullets are not synced.
wat
If you'd googled, you'd have seen that MOST people have no trouble with Win10, and plenty of people had trouble before Win10... and you might even find a solution.
@kukimuki1234 I'm too busy already, but I gave you some links, I'd encourage you to learn yourself ;)
It should be possible with ACTUAL modding, just know that iOS can't use real mods, and anyone who wants the new sounds will need to install the mod.
It will also require programming knowledge.
https://www.reddit.com/r/SimplePlanes/wiki/modding
https://docs.unity3d.com/ScriptReference/AudioSource.html
https://docs.unity3d.com/ScriptReference/Object.FindObjectsOfType.html
@kukimuki1234 @MechWARRIOR57
@drdoom222 Haha, well it's not like I get paid for it!
Besides, there are plenty of other mods to make ;)
@WNP78 I'm saying timewarp speed can change while you're in the console.
Probably shouldn't adjust the time warp speed while the console is open... I typed a command and then exited the console, and blew up from 12x speed.
@CaesiciusPlanes Unfortunately, you can either accept the physics decrease, or accept your device melting when you speed up.
Edit: Should have refreshed the page before finally commenting.. I'm 2 minutes late XD
@GriffithAir Modders can do theoretically anything with the full scripting support.
XML editors are limited as you stated.
@SPCWorkshops Android version works for kindle fire :)