Very nice. It handles quite well, and looks great. I love how you did the blinkers. Only flaw I found is the black part from the rear right fender falling off.
@PyrusEnderhunter I never said that I believe him, or that I don't. The OP is complaining about bullying, and I told him what I believe is a best thing to do if he is in that situation. It's not up to me to judge.
@jamesPLANESii I would not upload it anyway. I might convert it to crop duster and save it for myself. It would feature a different interior, paint scheme, and dusting equipment, but I never took a part from anyone since I was bronze, and I certainly won't take the entire plane. Thanks for the offer anyway.
@Cadin hard but possible to fly, huh? I'd say, my training jet I uploaded recently. As for the forum heading, I don't know. I'll tag you on my repulsorcraft unlisted upload.
It gives you a link to a specific comment. For example, when you request permalink,refresh the page, and it will center on that comment, showing it highlighted. You can send that link to someone, and it'll do the same for them. For us on SimplePlanes Masters chat, it came handy many times, when we are supporting each other in arguments, providing evidence for moderators, or just pointing out something somebody said.
If it wasn't already uploaded, I would have suggested yellow crop duster paint job. I had those flying low over my town spraying mosquitos every summer until they were unofficially retired few years ago...
You are not the only one. All of the people I have ever met have been victims of violence at some point, and committed acts of violence at some point in their life. Many people will give you different advices on what to do about it, from "Cave his face in with a baseball bat" to "Pretend it never happened". In school, it is often difficult distancing yourself from the bully. My advice would be, talk to your parents or teachers, and explain the entire situation to them. Even if he is not punching you, spreading false rumors is considered an act of violence, and in most countries, school must protect you from it.
@Ozi1001 I don't know much about iOS. Most of what I know is based on what I have read as responses to posts like this one. I know that some mod makers have considered a number of possibilities, with no success. I don't know if they considered ipa.
@Ozi1001 Apple policies do not allow unlicensed software, and that includes mods. Jailbroken IOS devices should be able support mods, but there are too few of those for mod makers to bother making IOS mods.
The game is officially released long time ago. Devs are constantly working on it, adding free updates that contain bug fixes, new parts, and new bugs. As it is a sandbox game, it can never be perfect. It always needs more parts and better tools. You can suggest features for future updates in the forums or on Jundroo Uservoice page, and Devs might see your suggestions some day, and will probably ignore the. Devs are also currently working on another game, so new updates for this one are not as frequent as they used to be. Possible release date for the next update is early this year, if all goes according to plan. That's what devs said few months ago.
@Clodork I'm not saying that not XML editing is wrong. What I'm saying is that it makes building stuff easier. Also, if you use parts made by other users, be sure to give credit. Otherwise, users who originally made those parts might accuse you of stealing their work. I'm not trying to offend you. That's just how things work around here, the unwritten rules.
@TheWeaver you can tag me on unlisted upload, so that I can try to pinpoint the exact cause of the problem. I don't have the time now, but I'll be free tomorrow.
@TheWeaver the drag glitch is difficult, sometimes impossible to work around. That glitch appeared on my delta fighter (it's a magnet for bugs), but on drop tanks. Because of that, I recommended detaching the tanks on the runway. Sometimes, the glitch appears on parts that are not supposed to be removable. Then it's a problem. Try remaking those parts using a different technique if possible. It might work. On the other hand, the fact that you only get roll when pitching can mean two things. It's caused by either uneven mass or deflection angles of control surfaces not being equal. The second possible cause happens if you tempered with deflection angles via XML and didn't make them even on both sides. Also a problem I had on that delta fighter.
It's not always in the part count. Sometimes, simplicity wins the day. If a build is fun to use, it'll score high. I just tested your mortar, and I feel like an idiot. I fire a shell, wait for some 20 seconds for it to fall, tap "Restart" to reload, and do it again and again.
The problem might be caused by two things. One is "drag glitch". It makes perfectly symmetrical parts have different drag. The second one, and my prime suspect here, is "mass glitch". I have never heard of anyone complaining about it, but it happened to me once, on the delta fighter you commented on earlier. It shifts CoM to the side, even though the plane is symmetrical. I think it happens as a ghost mass from a deleted part. To check this, turn on drag and CoM/CoL/CoT view. Offset of CoM might be barely noticable. Fix it by adding/removing mass or fuel. Drag glitch can be fixed by removing troublesome parts and re-making them.
@Clodork I noticed moded parts. XML editing is easy. You'll get used to doing it. Building is much easier with it. I suggest getting Overload mod from the mod section, it helps a lot with XML editing.
Wings are a bit large. Other than that, it looks nice.
Very nice. I never thought that I'll see a working calculator on SP.
Very nice. It handles quite well, and looks great. I love how you did the blinkers. Only flaw I found is the black part from the rear right fender falling off.
Very nice. Great details, cool idea, performs well, and has a top speed of almost 11mph. Driving it really is fun. Good job buddy.
@PyrusEnderhunter I never said that I believe him, or that I don't. The OP is complaining about bullying, and I told him what I believe is a best thing to do if he is in that situation. It's not up to me to judge.
Very nice. Looks quite realistic
It's nice. What are you planning to add? Hopefully not aggressive AA tanks.
@jamesPLANESii I would not upload it anyway. I might convert it to crop duster and save it for myself. It would feature a different interior, paint scheme, and dusting equipment, but I never took a part from anyone since I was bronze, and I certainly won't take the entire plane. Thanks for the offer anyway.
It looks beautiful. I'll have to test it later.
@Cadin hard but possible to fly, huh? I'd say, my training jet I uploaded recently. As for the forum heading, I don't know. I'll tag you on my repulsorcraft unlisted upload.
@Cadin hey, I forgot to thank you for the version not infested with tanks. Thanks m8.
It gives you a link to a specific comment. For example, when you request permalink,refresh the page, and it will center on that comment, showing it highlighted. You can send that link to someone, and it'll do the same for them. For us on SimplePlanes Masters chat, it came handy many times, when we are supporting each other in arguments, providing evidence for moderators, or just pointing out something somebody said.
If it wasn't already uploaded, I would have suggested yellow crop duster paint job. I had those flying low over my town spraying mosquitos every summer until they were unofficially retired few years ago...
No problem @CoolPeach
Very nice. Finally a good-looking An2
Tagging people on the post itself doesn't work. You have to do it in the comment. Here, I'll do it for you.
@trolman
You are not the only one. All of the people I have ever met have been victims of violence at some point, and committed acts of violence at some point in their life. Many people will give you different advices on what to do about it, from "Cave his face in with a baseball bat" to "Pretend it never happened". In school, it is often difficult distancing yourself from the bully. My advice would be, talk to your parents or teachers, and explain the entire situation to them. Even if he is not punching you, spreading false rumors is considered an act of violence, and in most countries, school must protect you from it.
@Ozi1001 no problem. Us "old users" should always try to help newer ones, and an answer is easy to give =)
@Ozi1001 I don't know much about iOS. Most of what I know is based on what I have read as responses to posts like this one. I know that some mod makers have considered a number of possibilities, with no success. I don't know if they considered ipa.
@Ozi1001 Apple policies do not allow unlicensed software, and that includes mods. Jailbroken IOS devices should be able support mods, but there are too few of those for mod makers to bother making IOS mods.
The game is officially released long time ago. Devs are constantly working on it, adding free updates that contain bug fixes, new parts, and new bugs. As it is a sandbox game, it can never be perfect. It always needs more parts and better tools. You can suggest features for future updates in the forums or on Jundroo Uservoice page, and Devs might see your suggestions some day, and will probably ignore the. Devs are also currently working on another game, so new updates for this one are not as frequent as they used to be. Possible release date for the next update is early this year, if all goes according to plan. That's what devs said few months ago.
When scaling tings down, either disable relative scale, or use numbers smaller than 1 (ex: 0.25, 0.5).
There's no way to filter planes by the rank of their builders. Just visit accounts of players you like to see their builds.
I read all of the books and saw most of the films about him when I was a kid. Kinda grew out of it tho.
@TheGuyYouMightKnow that is a pretty common problem known as "anger management issue". To fix it, visit your psychiatrist =P
Very interesting. A flamethrower that actually does damage. I like it.
Very nice. Looks great. Only improvement that I could suggest would be using hover technology while on the ground.
+1It lagged my laptop. The interior is great tho
@RealQcan oh, ok.
How did he get your F4U wip? Let me guess, you were spamming WIPs?
Just incredible. The backlit cockpit is amazing.
@Mrloominati no problem buddy. You'll join me at high level soon if you keep building like this.
Very nice. It's a great build. Amazing details and good shape. Keep up the good work.
Very nice
@Clodork I'm not saying that not XML editing is wrong. What I'm saying is that it makes building stuff easier. Also, if you use parts made by other users, be sure to give credit. Otherwise, users who originally made those parts might accuse you of stealing their work. I'm not trying to offend you. That's just how things work around here, the unwritten rules.
@TheWeaver you can tag me on unlisted upload, so that I can try to pinpoint the exact cause of the problem. I don't have the time now, but I'll be free tomorrow.
@MechWARRIOR57 it reloads on "Restart" =). It ain't going anywhere, so restarting is just as good as reloading.
@TheWeaver the drag glitch is difficult, sometimes impossible to work around. That glitch appeared on my delta fighter (it's a magnet for bugs), but on drop tanks. Because of that, I recommended detaching the tanks on the runway. Sometimes, the glitch appears on parts that are not supposed to be removable. Then it's a problem. Try remaking those parts using a different technique if possible. It might work. On the other hand, the fact that you only get roll when pitching can mean two things. It's caused by either uneven mass or deflection angles of control surfaces not being equal. The second possible cause happens if you tempered with deflection angles via XML and didn't make them even on both sides. Also a problem I had on that delta fighter.
It's not always in the part count. Sometimes, simplicity wins the day. If a build is fun to use, it'll score high. I just tested your mortar, and I feel like an idiot. I fire a shell, wait for some 20 seconds for it to fall, tap "Restart" to reload, and do it again and again.
The problem might be caused by two things. One is "drag glitch". It makes perfectly symmetrical parts have different drag. The second one, and my prime suspect here, is "mass glitch". I have never heard of anyone complaining about it, but it happened to me once, on the delta fighter you commented on earlier. It shifts CoM to the side, even though the plane is symmetrical. I think it happens as a ghost mass from a deleted part. To check this, turn on drag and CoM/CoL/CoT view. Offset of CoM might be barely noticable. Fix it by adding/removing mass or fuel. Drag glitch can be fixed by removing troublesome parts and re-making them.
@zhouzl no problem
Very nice. Great details, good shape, and decent functionality. I like it.
@Clodork I noticed moded parts. XML editing is easy. You'll get used to doing it. Building is much easier with it. I suggest getting Overload mod from the mod section, it helps a lot with XML editing.
@QingyuZhou no problem. Can't wait to see more
@jamesPLANESii thanks. That's what I'm trying to achieve with them.
I haven't noticed your builds earlier. Now you have a new follower, so I don't miss the future ones ;)
Make a better description. A craft like this is a good base for a short story. Maybe something about a spaceship crashing into a junkyard.
It looks amazing. Great job, can't wait to upvote it.
Nice work. Sounds interesting