@Alienbeef0421 your builds look a bit like stock planes, good but too simple. I understand that that might be due to the limits of your device, but still, @BogdanX manages to make some amazing builds with 250-300 parts.
@LiamW ugh, no. You still have a long way to go. Learn tricks, improve your builds, and one day, who knows. I'd like to add everyone, but that would kill the point of SimplePlanes Masters.
@MechWARRIOR57 I will. The next few days will be a lot of work, and a lot of users to consider. Also, keep in mind that, even if one of us suggests you, we have to vote for it. If one of us is holding a grudge with you, you're not coming in.
@BaconAircraft we want to be known, so we can provide a guideline for the community. Only good guys join the chat. Maybe a wish to join us will help with the tension in the community, and make things better. That's my reason for taking part in this.
@BaconAircraft @MrSilverWolf founder of the chat is unknown to me, as I'm on it for less than a year. Until now, we were quite reluctant to add people. We cleared the chat a bit, and will start adding more people. We added five in the last two days, which is a new record, five times more than in and 48-hour period. We are considering many people, and two of you just might find yourselves among us in a little while. Going public came as a bit of a shock for us, so give us a little time please.
@jamesPLANESii quick, add a logo from this post to your bio. It's temporary, until the main one gets approved by devs. We based it on SimplePlanes logo, so we want approval.
They used to post them on the site, but there weren't any for the last six months. Some say there'll be one more update in a few months, some say there won't be any updates.
Well, the top tip is: Don't let it tip (over)
Joke aside, I usually use blocks with XML edited buoyancy placed at the waterline, and nudged into the hull. Also, adding fuel and dead weight into the bottom parts of the hull helps. Don't add buoyancy to underwater parts of the hull.
Welcome to the community. Read the rules here. You will gain points (the number in the white square next to your username). One "Upvote" on a plane you upload brings 15 points, and an upvote on the forum post brings 2 points. Once you reach 100 points, your point field (currently white) will turn bronze, at 1000 points silver, at 5000 gold, and black (we call it platinum) at 25000 points. To tag a person in the comment, put "@" in front of their username, or hit the "Reply" button on their comment (ex: @SuperKillerArmy1). This will send notification to the person you mentioned. I wish you a happy stay in the SimplePlanes community, and a lot of points. As for WW2 aircraft, you will find plenty of those on the site.
They look way different to me. As if they are not replicas of a same plane. Scale is different, details, fuselage shape, color scheme... I'd say, even if it did use a few of your parts on less visible places, it's not a copy, and you don't have an excuse to report it as a copy. The nose is made using a similar technique, but not identical. Also, chances are, the front landing gear is yours.
Self-advertisement is against the common courtesy of the community, and against the rules ("Don't beg for upvotes"). I don't wanna sound salty or anything, but you should consider removing this post before mods get to it. As for your tank, it's good, but you chose a color poorly. Black doesn't make it stand out against a dark background.
There was a company with which Jundroo (Devs of SimplePlanes) worked for a while, that did just that. Unfortunately, it went bankrupt. I'm pretty sure there's still an option to print a build if you have a 3d printer, but I don't know where it is. Maybe @AndrewGarrison can tell you.
@CWhat016 right click and drag a part to clone it. Ctrl+M to mirror a part, Ctrl+ click and drag lets you move camera without moving parts, or select a part without fear of moving it. Q,W,E,A,S,D = rotate. Space = CoM,CoL,CoT view. Also, what spefyjerbf said.
@Alienbeef0421 your builds look a bit like stock planes, good but too simple. I understand that that might be due to the limits of your device, but still, @BogdanX manages to make some amazing builds with 250-300 parts.
@LiamW yeah, guess so. No hard feelings, i hope.
@LiamW ugh, no. You still have a long way to go. Learn tricks, improve your builds, and one day, who knows. I'd like to add everyone, but that would kill the point of SimplePlanes Masters.
@MechWARRIOR57 I will. The next few days will be a lot of work, and a lot of users to consider. Also, keep in mind that, even if one of us suggests you, we have to vote for it. If one of us is holding a grudge with you, you're not coming in.
@deusalgor Yes. Time to fix that. We are all respected users. Let's use that to fix stuff
@Joco80 we won't kick Sauce. I added him long time ago, and he kinda grew on me. He's kinda our main derp.
@Joco80 we told him. He was a bit taken off-guard, as the decision to go public was quite sudden. I don't think he'll do it again.
@BaconAircraft we are trying to be good. According to this comment section, it backfired. But hey, Rome wasn't built in a day.
@BaconAircraft we want to be known, so we can provide a guideline for the community. Only good guys join the chat. Maybe a wish to join us will help with the tension in the community, and make things better. That's my reason for taking part in this.
@DeathStalker627 no problem buddy
@BaconAircraft @MrSilverWolf founder of the chat is unknown to me, as I'm on it for less than a year. Until now, we were quite reluctant to add people. We cleared the chat a bit, and will start adding more people. We added five in the last two days, which is a new record, five times more than in and 48-hour period. We are considering many people, and two of you just might find yourselves among us in a little while. Going public came as a bit of a shock for us, so give us a little time please.
@jamesPLANESii great
@jamesPLANESii quick, add a logo from this post to your bio. It's temporary, until the main one gets approved by devs. We based it on SimplePlanes logo, so we want approval.
@MrMecha no problem
Can't wait :)
@MrMecha you are under consideration. We are just awfully slow with recruiting.
@Joco80 and Spefy is a candidate to vote for when this stuff blows over
@EliteIndustries1 yes. Just no more arguing, please. It doesn't matter who started.
@TheLatentImage good thing about the mod tag being red is, it attracts attention. There's no way someone will miss you comment.
@Botfinder @EliteIndustries1 @MechWARRIOR57 on the chat, we do not support the way Sos is behaving now. We told him to stop.
@Sauce @Botfinder @EliteIndustries1 I hope you guys didn't argue too much down there. I'm too lazy to read all those comments.
@Sauce don't get the mods involved
@EliteIndustries1 sure it is, buddy, sure it is...
@Joco80 yes
@BirdOfSteel your builds are generally well-designed, but they lack details. Maybe some day.
@Joco80 we suggest candidates. Anybody can suggest one, and everyone can vote.
@Joco80 We vote. The chat is democratic
@Joco80 you have to be VERY good at making builds or mods. The chat has been around for more than two years, and we only recruit the best of the best.
Niiiiiice bodywork. And I won't even bother to comment of suspension. It's just amazing
Ctracerx2 is right. We are refreshing the chat with a bunch of new guys, and I'd like to see some from the old lineup active as well.
I vote for FSS Monitor, the greenish cargo one, single "hull"
They used to post them on the site, but there weren't any for the last six months. Some say there'll be one more update in a few months, some say there won't be any updates.
Well, the top tip is: Don't let it tip (over)
Joke aside, I usually use blocks with XML edited buoyancy placed at the waterline, and nudged into the hull. Also, adding fuel and dead weight into the bottom parts of the hull helps. Don't add buoyancy to underwater parts of the hull.
Welcome to the community. Read the rules here. You will gain points (the number in the white square next to your username). One "Upvote" on a plane you upload brings 15 points, and an upvote on the forum post brings 2 points. Once you reach 100 points, your point field (currently white) will turn bronze, at 1000 points silver, at 5000 gold, and black (we call it platinum) at 25000 points. To tag a person in the comment, put "@" in front of their username, or hit the "Reply" button on their comment (ex: @SuperKillerArmy1). This will send notification to the person you mentioned. I wish you a happy stay in the SimplePlanes community, and a lot of points. As for WW2 aircraft, you will find plenty of those on the site.
Yes. Overload mod makes that easy. Another mod you must have is Fine Tuner
Hexadecimal, or Hex code. Look it up on google.
@WalrusAircraft I also like the flaps. Good attention to details there.
I had to download it to check, but my guess was a wheel. Great idea. I'll have to try that out.
Nope, no joke. I was hoping for one, but there wasn't one.
On a person's comment, click on the down-facing arrow. It gives you a few options, including "Block User".
+2@SimpleFlow You might wanna remove this post, and maybe your comment on spasmsofjustice's post.
They look way different to me. As if they are not replicas of a same plane. Scale is different, details, fuselage shape, color scheme... I'd say, even if it did use a few of your parts on less visible places, it's not a copy, and you don't have an excuse to report it as a copy. The nose is made using a similar technique, but not identical. Also, chances are, the front landing gear is yours.
Sos, why are you teasing? We all know that you are Andrew's alt :)
Self-advertisement is against the common courtesy of the community, and against the rules ("Don't beg for upvotes"). I don't wanna sound salty or anything, but you should consider removing this post before mods get to it. As for your tank, it's good, but you chose a color poorly. Black doesn't make it stand out against a dark background.
There was a company with which Jundroo (Devs of SimplePlanes) worked for a while, that did just that. Unfortunately, it went bankrupt. I'm pretty sure there's still an option to print a build if you have a 3d printer, but I don't know where it is. Maybe @AndrewGarrison can tell you.
@Halphas no problem
@kerothehero no problem
@CWhat016 right click and drag a part to clone it. Ctrl+M to mirror a part, Ctrl+ click and drag lets you move camera without moving parts, or select a part without fear of moving it. Q,W,E,A,S,D = rotate. Space = CoM,CoL,CoT view. Also, what spefyjerbf said.
@WagonRestorant no problem buddy
Hey look, it's a push for silver :)