@Boatrider I've already made a T-72, I'll maybe upload that first or I can make a T-90 and upload that instead, and yeah theyre easier to make, the ERA on the cheeks are pretty hard though. And thanks man!
difference is noticeable as you put the Wheels on a rotator or two, if its used to hold something heavy its gonna bounce or just sink to the ground and break the custom gear, where as the pre 1.7 wheel would not even budge an inch. I personally experiment on a lot of custom landing gears so its very noticeable for me
This might be the answer, pre update resizable wheel. you can try strapping off custom landing gears from your older builds that are pre-recent-update, i personally keep this one in sub-assemblies for daily custom LG usage. Hope this helps.
note, I'll be gone for a few days/a week and hopefully be back even sooner to answer if you guys have any questions, be right back and hope you all enjoy!! cheers!!
@MethaManAircraft much appreciated dude, The vertical stabilizer works by giving no mass to the barrel, no rotating power on the hinge rotator, and a gyroscope on the barrel with 150-200% stability/speed depending on how strong it can hold the barrel, dont forget to add Pitch angle to give the barrel its elevation and depression range. i got the horizontal stabilizer to work by inverting one gyroscope horizontally on the turret with 250% stability/speed and without any yaw, pitch, or roll power. That gives the turret the ability to stand still, and then you can use the gyroscope on the barrel where you used it for the vertical stabilizer, and add some yaw power to turn the turret. Its best that you put the yaw input as roll to use it easily when using it. If this explanation is too short I'll gladly explain it to you thoroughly if you want to! and again, thanks alot for the comment and upvote!
@Boatrider I've already made a T-72, I'll maybe upload that first or I can make a T-90 and upload that instead, and yeah theyre easier to make, the ERA on the cheeks are pretty hard though. And thanks man!
@Blue0Bull many thanks m8ey!
@yoshicraze thank you!
@Russkiy98 oo blin, thank you comrade
@grizzlitn spasiva comrade!!
@ShockRF much appreciated man!
@NANOMAN thank you dude!
@Ajforever51 thanks man!
@Roswell Star spangled banner intensifies. Thanks man!
@Julesonaut @ErvenDynamics thanks dudes!
@Mostly after centuries of slacking around :') Thanks dude!
@Othawne laughs in Leo2a4
Thanks bud!
@Minecraftpoweer hyperlinks functioning as intended... I'll keep trying to fix it, thanks for the info!
@Minecraftpoweer how bout now?
@Minecraftpoweer no pictures at all? weird.
Yeeeeees
@Sheeper glad to be of help :) no problem!
too good to turn off
@Sheeper righto, try to snatch of resizable wheels off of your old builds or use the one I linked you on my first comment if you don't have any.
difference is noticeable as you put the Wheels on a rotator or two, if its used to hold something heavy its gonna bounce or just sink to the ground and break the custom gear, where as the pre 1.7 wheel would not even budge an inch. I personally experiment on a lot of custom landing gears so its very noticeable for me
I was hoping someone would do this eventually, nice job!
though a hard landing would definitely make it bounce, so take it easy and smooth on the touchdowns
This might be the answer, pre update resizable wheel. you can try strapping off custom landing gears from your older builds that are pre-recent-update, i personally keep this one in sub-assemblies for daily custom LG usage. Hope this helps.
@Valiant2017 thanks man :)
@CCCP Spasiva comrde! ))))
@PorkyClown3 @Alix451 thanks dudes! appreciate it :)
@Pianoman @Pilotmario thanks alot guys ))))
@ElgatoVolador thank you o' wise cat!
@DestinyAviation @ShatSlanger @Mostly @Baldeagle086 @AstleyIndustries @ColonelStriker much appreciated guys!
@Serkonda @ThomasRoderick @Thespiritusraptorfan @Jettstorm @yoshicraze @greasytortle thank you guys!!
@JAPANAIR1 thank you!
@MethaManAircraft in a nutshell, yepp
note, I'll be gone for a few days/a week and hopefully be back even sooner to answer if you guys have any questions, be right back and hope you all enjoy!! cheers!!
@JackTheBestBoss thanks man!
@goboygo1 thanks dude!
@grizzlitn spasiva comrade ))))))
@NANOMAN @TAplanes @QingyuZhou @SSSvaSSa thanks alot you guys!
@MethaManAircraft much appreciated dude, The vertical stabilizer works by giving no mass to the barrel, no rotating power on the hinge rotator, and a gyroscope on the barrel with 150-200% stability/speed depending on how strong it can hold the barrel, dont forget to add Pitch angle to give the barrel its elevation and depression range. i got the horizontal stabilizer to work by inverting one gyroscope horizontally on the turret with 250% stability/speed and without any yaw, pitch, or roll power. That gives the turret the ability to stand still, and then you can use the gyroscope on the barrel where you used it for the vertical stabilizer, and add some yaw power to turn the turret. Its best that you put the yaw input as roll to use it easily when using it. If this explanation is too short I'll gladly explain it to you thoroughly if you want to! and again, thanks alot for the comment and upvote!
@Minecraftpoweer had to publish for the sake of justice! thank you :))
@DimaKosheleFF haha thanks man!
@GenrichTitov Tried my best! and thank you!!
@MethaManAircraft or will I?!?!??!?! dun dun duuuuun
@Authros thanks a lot man!
@Seeras danke mein freund ))))
@SomeFox oh I regret not finishing peacewalker, was the mbt70 really there in peacewalker?? and thanks alot for the upvote!
@getorge @Sgtk thanks you two!
@PhantomBladeCorp thanks alot dude!
@CRJ900Pilot many thanks!
@EternalDarkness yeah I forgot to mention about the buggy suspension on paved roads, does well offroad though. Much appreciated dudee
@Tully2001 omaigad youre mod now, i didnt even notice lol, congrats my dude!