personally build your interior before the cockpit. however make sure to restrain its size roughly. then cover it, smooth it out, also clear glass under opaque glass is 1 way
oh, i helped someone with this a while back, white isnt a colour you can really get. use another VTOL outlet, you can always reduce its engine power to 0 if you dont wanna mess stuff up. Scale the exhaust fat and wide, like a sonic boom, using hex FFFFFF would be white, but you need to remove some red for a whiter white, try something like D6FFFF. Have it running off funky trees, you could use something like
. Variable1 = IAS>343.3?Variable1+0.01:0 Variable2 = clamp01(round(exp(-Variable1)))
@L1nus Basically, you wanna know how your mech walks.
If it walks like a normal human person
-You can find graphs of the gait cycle
-use extension angle against time graphs
-either using a graphing calculator or through other means e.g. Fourier transform
-recreate the graph using regular sinusoidal/other periodic waves
-repeat for each joint, usually hip, knee, ankle.
-copy to other leg, and add a phase factor in the waves to put them about 180* out of sync to each other like normal leg movement.
I have a little documentation on it, and i can link you to my resulting mech if u want
@Solent sort of, my final output is basically just a step away from finding the angle between which way you are headed from the way you want to go. Called the dot product, a value from -1 to 1, where -1 means you’re facing the opposite direction and 1 means you’re heading straight.
.
Like it will work with a PID, but it might make you spin 360* because the dot product is kinda just a rating on how well you’re headed in the right direction, not which direction.
.
If you do want the dot, it’s the bit by all the '█' on the main label
@RepublicofWrightIsles while the offer is nice, after the end of this upload week I’m going low activity for a while, my studies and my job are picking up in severity, and I don’t really have the time for simple planes tbh
@griges just type acos(whatever) and it should work with funky trees,
the acos is the inverse of cos, which means its kinda like the opposite of cos,
like how 1/4 x (4x1) = 1
arccos(cosine(1)) = 1.
The formula for finding the angle that uses arccos, uses a bunch of geometry for a proof, I never really had it explained that well, because my teacher was bad at his job. Here is a tutorial of how to use it, im not sure if it shows a proof. The equation normally is cos(theta) = a.b/(|a|*|b|) where the || is a fancy way of writing a^2 + b^2 = c^2, find c
@YarisHatchback lol, there was a post from someone where people were bummed u were gone, glad ur back
looks good! also for the link to work dont have a space between the square and normal brackets
[like](this)@YarisHatchback ayo your back
I do not like this fact, it makes me feel old. and i thought The states was 21?
+1personally build your interior before the cockpit. however make sure to restrain its size roughly. then cover it, smooth it out, also clear glass under opaque glass is 1 way
+1its something
1, a good engine
+22, harrier
3, in an ideal world never
nope
Yeah, smaller creators need encouragement to stick around more
my most upvoted is this but its old and outdated now
@keiyronelleavgeek566 finally someone based
+1I’ve always loved the environment of sp planes, nice work, also make a sp nature documentary and my life is yours
Insane work for 500 parts
+1RIP.
+1Chinook, Hercules, a tunnel bore
post a build, get upvotes
+1@goboygo1 haven’t seen you around in ages, Ty for the support
@Rob119 congrats on plat
+1if none of this works you could try another type of engine, but VTOL is prob the best icl
+1oh, i helped someone with this a while back, white isnt a colour you can really get. use another VTOL outlet, you can always reduce its engine power to 0 if you dont wanna mess stuff up. Scale the exhaust fat and wide, like a sonic boom, using hex FFFFFF would be white, but you need to remove some red for a whiter white, try something like D6FFFF. Have it running off funky trees, you could use something like
+1.
Variable1 = IAS>343.3?Variable1+0.01:0Variable2 = clamp01(round(exp(-Variable1)))Right now I’d take torpedos that work reasonable distances underwater icl
@blt yes sir o7
+1@BARREND Will do
@L1nus ah. if you find it looks good enough feel free to copy the code from my mahoraga. make sure to have a strong gyro too
@L1nus Basically, you wanna know how your mech walks.
If it walks like a normal human person
I have a little documentation on it, and i can link you to my resulting mech if u want
@Graingy beats me, i had it on my old ipad, late 2016 i think, i just remember building dumb rockets
@MartennLockkenn its all about advertising i think, or being in the right communities/having the right friends
What type of walker are you wanting, like actual physics based walking? Or like ‘fake’ walking where it doesn’t acc walk but uses wheels/jets etc
@Graingy yeah
@Graingy bit under a year without an account
@MartennLockkenn nah not even. I had two builds which reached front page, but i had two which got near none.
@ShinyGemsBro I try my best, but my data could get ruined by a light breeze atp
+1@Graingy and the time without an account lol, either way congrats
@Graingy and somehow you'd get to a mil before i get to plat
What we he banned over, he was a chill guy :/
+1Preach
@LunarEclipseSP labels work well
+1I mean ammo types would be nice, but i want something new, like an EMP, or th british Dragonfire or smth
@XEPOH I mean, my satnav is pretty simple, you’re free to make that if you want, but personally I prob won’t,
@Dissent3R i didn’t know the drama, so it sorta looked like you were talking to yourself, no explanation. Nothing
Schizophrenia simulator
+6@ThomasRoderick jundroo city, not 100% sure what it’s called in the mod menu
+1@Grob0s0VBRa, if you wanted to look at the label tracks, they have, at best, mixed results
+1Happy Bday!
+11:1 walking model of the rizzler
+3@Solent sort of, my final output is basically just a step away from finding the angle between which way you are headed from the way you want to go. Called the dot product, a value from -1 to 1, where -1 means you’re facing the opposite direction and 1 means you’re heading straight.
.
Like it will work with a PID, but it might make you spin 360* because the dot product is kinda just a rating on how well you’re headed in the right direction, not which direction.
.
If you do want the dot, it’s the bit by all the '█' on the main label
@RepublicofWrightIsles while the offer is nice, after the end of this upload week I’m going low activity for a while, my studies and my job are picking up in severity, and I don’t really have the time for simple planes tbh
@ShinyGemsBro perchance
@griges no sweat, if you need anything gimme a shout, of you need anything
+1@griges just type acos(whatever) and it should work with funky trees,
+1the acos is the inverse of cos, which means its kinda like the opposite of cos,
like how 1/4 x (4x1) = 1
arccos(cosine(1)) = 1.
The formula for finding the angle that uses arccos, uses a bunch of geometry for a proof, I never really had it explained that well, because my teacher was bad at his job. Here is a tutorial of how to use it, im not sure if it shows a proof. The equation normally is
cos(theta) = a.b/(|a|*|b|)where the || is a fancy way of writing a^2 + b^2 = c^2, find c