Front plate thickness: 150mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle + 50mm plate (PS.SiCrMo65)
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 200mm
Turret front (up) armor: 190mm at 30 degrees
Turret front (down) armor: 160mm at -60 degrees
Turret middle (front) armor: 110mm
Turret middle (rear) cheek armor: 80mm
Turret rear armor: 50mm
The percentages may differ from the steel marking, for example MK-A is the worst, that is, it has the minimum values from this table, and MK-C, on the contrary, has the maximum values
@YourAverageB1BLancerSimp But it's still hard to watch when my new MBT is inferior in characteristics to the MBT from 1950, besides, my MBT costs as much as a small country, and this one costs only 800,000, besides, the engine that I installed on which I was betting is just a laughing stock compared to this 2300 horsepower monster...
@YourAverageB1BLancerSimp Why the hell did I need to develop the MBT-70 then, and especially my own MBT? Actually, the characteristics of GAMBT are not bad, if I understand correctly
currently have 35,000 units available for sale.
Price: $1,550,000 ~ 2,100,000
Package: comes with 2 months maintenanc
@Mitterbin
+1@Voytek
@BigHeadEngineering
I haven't had time to finish the description yet.
Hey
Materials:
Kerrex.A10 - 12.5%
PS.SiCrMo65 - 31.25%
PS.ST52M - 31.25%
PS.SiCrMo65 - 25%
Front plate thickness: 150mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle + 50mm plate (PS.SiCrMo65)
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 200mm
Turret front (up) armor: 190mm at 30 degrees
Turret front (down) armor: 160mm at -60 degrees
Turret middle (front) armor: 110mm
Turret middle (rear) cheek armor: 80mm
Turret rear armor: 50mm
@BOSSentinel oh...
@BOSSentinel ?
@voytek Well, it happens.
T
T
If you want to use steel from AMFK, you can request permission.
@BOSSentinel What can you do, you have to somehow calculate the reduction
@Bugati87 Thanks for that and this time
Oh... That awesome
The percentages may differ from the steel marking, for example MK-A is the worst, that is, it has the minimum values from this table, and MK-C, on the contrary, has the maximum values
I officially hate muzzle brakes now
@Mitterbin hmmm
+1@Mitterbin Now stable after dropping the bomb
+1Tag-6
@SPWithLizzie
Tag-5
@RepublicOfWrightIsles
@Mitterbin
@notrob119
Tag-4
@BOSKnight
@MIGFOXHOUND31BSM26
@voytek
Tag-3
@Bugati87
@keiyronelleavgeek566
@BigheadEngineering
Tag-2
@RB107
@B1BLancer
@LunarEclipseSP
Tag-1
@deutschFELLA
@Schmoovebrain
@DeeganWithABazooka
here AMFK
@YourAverageB1BLancerSimp It weighs from 50 to 70 tons as I understand my A2 weighs 80 minimum
@YourAverageB1BLancerSimp But it's still hard to watch when my new MBT is inferior in characteristics to the MBT from 1950, besides, my MBT costs as much as a small country, and this one costs only 800,000, besides, the engine that I installed on which I was betting is just a laughing stock compared to this 2300 horsepower monster...
+1@YourAverageB1BLancerSimp Understand...
+1@YourAverageB1BLancerSimp When MBT can be bought for less than a fkn light tank
+1@YourAverageB1BLancerSimp It feels like I don't see any point in my projects.
+1@YourAverageB1BLancerSimp Maybe I overstated the price for 1A2, but I'm not sure.
@YourAverageB1BLancerSimp It's not real, why the hell do I need my MBT if I can buy GMBT cheaper?
Cool
+1@BOSinitiate We will turn a blind eye to this
@YourAverageB1BLancerSimp Why the hell did I need to develop the MBT-70 then, and especially my own MBT? Actually, the characteristics of GAMBT are not bad, if I understand correctly
@GeneralCorpInc Well, Idk, I asked a friend to make a logo (he can draw), but how did he do it?
+1If yes...
+1@Mitterbin Will he be able to compete with Löwenhart A2?
+1@B1BLancer $800,000??? Really?
@GeneralCorpInc Just two problems, great
+1@Mitterbin You already have enough, I understand.
+1@Mitterbin Don't you want to buy a couple of pieces? it's not for nothing that I made it...
+1@Mitterbin And this tank has the maximum number of guns.
+1@Mitterbin Finally I was able to make a normal description
+1Tag-6
+1@SPWithLizzie
Tag-5
+1@RepublicOfWrightIsles
@Mitterbin
@notrob119
Tag-4
@BOSKnight
@MIGFOXHOUND31BSM26
@voytek
Tag-3
@Bugati87
@keiyronelleavgeek566
@BigheadEngineering
Tag-2
@RB107
@B1BLancer
@LunarEclipseSP
Tag-1
@deutschFELLA
@Schmoovebrain
@DeeganWithABazooka