Löwenhart Heavy Main Battle Tank
Designed and manufactured by the corporation AMFK.
Armament
Main Gun:
- C15.5cm/45cal MK-III — 155mm smoothbore cannon
- Autoloader reload time: 2.5 second (reliability 83.5%. The accuracy is 91.5%)
- Ammunition types:
- APHEDS — muzzle velocity: 925 m/s
- HESH — muzzle velocity: 800 m/s
- HE — muzzle velocity: 800 m/s
- HEAT — muzzle velocity 800 m/s
- APFSDS (155/90/35mm) — muzzle velocity: 1,800 m/s
- Depression:
- Vertical: +30° / -2°
- Horizontal: +180° / -180°
Secondary Armament:
- Coaxial C3.5cm/60cal MK-I — 35mm autocannon
- Ammunition types:
- Basic ammunition: 35x228mm
- APDS-T muzzle velocity: 1,300 m/s
- HE-I muzzle velocity: 875 m/s
- HE-FRAG-T muzzle velocity: 975 m/s
- Rate of fire: 2 rounds/sec (0.5s between shots)
- Coaxial HMG:
- Options: 15mm or 12.7mm
- Rate of fire: 1,800 RPM
Commander's Independent Weapon Station (CIWS):
- C5cm/70cal MK-I
- Ammunition types:
- Supports various types of 50×430mm to 50×500mm ammunition
- Basic ammunition: 50x480
- APFSDS muzzle velocity: 1,500 m/s
- HE-I muzzle velocity: 950 m/s
- HE-FRAG-T muzzle velocity: 1,000 m/s
- Rate of fire: 1s between shots
- Depression:
- Vertical: +30° / -7.5°
Horizontal: +180° / -180° (In practice, the horizontal aiming is less due to the antennas and anti-aircraft mount)
Optional upgrade: 20mm Remote Gun turret with 50mm grenade launcher by OverlordPrime
Anti-air mount:
- Twin C2cm/55cal MK-IV
- Ammunition types:
- Basic ammunition: 20x139
- (Left) ammunition: HE-I muzzle velocity: 1,100 m/s
- (Right) ammunition: APDS-T muzzle velocity: 1,150 m/s
- total fire rate: 1,000 RPM
- Depression:
- Vertical: +75° / -18.75°
Horizontal: +180° / -180°
Optional upgrade: 20mm Remote Gun turret with 50mm grenade launcher by OverlordPrime
Mobility
Engine:
- AMFK Kraftblock V16-MF1200HE-M
- Output: 1,200 horsepower
- Fuel: Multi-fuel compatible
Speed:
- Maximum (on-road): 50 km/h
- Maximum (off-road): 30 km/h
Crew
Commander
Driver
Gunner
Radioman
Loader
Specifications
General Characteristics
- Predecessor Hull.Lowenhart AMFK13X7 [KE-RP]
- Created On Android
- Wingspan 16.5ft (5.0m)
- Length 49.0ft (14.9m)
- Height 18.6ft (5.7m)
- Empty Weight 184,414lbs (83,649kg)
- Loaded Weight 192,010lbs (87,094kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 13696
Parts
- Number of Parts 367
- Control Surfaces 0
- Performance Cost 1,829
@GeneralCorpInc @BOSSentinel If I screwed up somewhere in the material part, I don’t know what I’ll do with myself
Materials:
PS.SiCrMo65:
Carbon (C): ~0.45-0.55%
Silicon (Si): ~1.0-1.5%
Chromium (Cr): ~1.8-2.2%
Molybdenum (Mo): ~0.4-0.6%
Manganese (Mn): ~0.8-1.2%
Nickel (Ni): ~0.3-0.5% (optional for crack resistance)
Remaining: Iron (Fe) - basis
Kerrex.A5-15:
Matrix: Reinforced composite structure based on silicate and fluoroplastic binders
Filler: Ceramics (Al₂O₃ or B₄C), layered Ti-TiB₂ with hexagonal interlayers (e.g. h-BN)
Layer: Viscous layer for energy dissipation (silica gel/rubber resin)
Materials: PS.SiCrMo65 + 5~15mm of Kerrex.A5-15
Front plate thickness: 95mm+10mm at a 84 degree angle
Middle front plate thickness: 175mm+15mm at 68 degrees
Lower front plate thickness: 120mm+10mm at a 45 degree angle + 60mm plate
Upper side thickness: 85mm+10mm at 0 degrees
Lower side thickness: 70mm+5mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees
Upper rear thickness: 40mm+5mm at 10 degrees
Lower rear thickness: 50mm+5mm at 0 degrees
Hull roof armor: 35MM+5mm at 0 degrees
Hull floor armor: 35MM+5mm at 0 degrees
Gun mask: 240mm+15mm
Turret front (up) armor: 210mm+15mm at 30 degrees
Turret front (down) armor: 190mm+10mm at -60 degrees
Turret middle (front) armor: 125mm+10mm
Turret middle (rear) cheek armor: 95mm+5mm
Turret rear armor: 50mm+5mm
currently have 7,500 units available for sale.
Price: $2,875,000 ~ 4,750,000
Package: comes with 2 months maintenanc
@BOSinitiate We will turn a blind eye to this
@AugustVonMartis well…. The terrible gun depression is another thing..
@GeneralCorpInc Just two problems, great
also, you APHE-DS won't be very useful as KE have a lot of slopped armors and there are problems like penetration limitations at high impact angles, potential for premature detonation, and the difficulty of integrating a discarding sabot with a high explosive filler.
well, that's great. nothing obviously bad, you can let it as it is. the only thing would be the 35mm firing like a machine gun. 0.5s/shot would be more realistic while still being fast.
@Mitterbin You already have enough, I understand.
@AugustVonMartis -_-
@Mitterbin Don't you want to buy a couple of pieces? it's not for nothing that I made it...
@Mitterbin And this tank has the maximum number of guns.
@Mitterbin Finally I was able to make a normal description
Holy, very good description
Tag-6
@SPWithLizzie
Tag-5
@RepublicOfWrightIsles
@Mitterbin
@notrob119
Tag-4
@BOSKnight
@MIGFOXHOUND31BSM26
@voytek
Tag-3
@Bugati87
@keiyronelleavgeek566
@BigheadEngineering
Tag-2
@RB107
@B1BLancer
@LunarEclipseSP
Tag-1
@deutschFELLA
@Schmoovebrain
@DeeganWithABazooka