The Bren gun is a series of light machine guns (LMG) made by Britain in the 1930s and used in various roles until 1992. While best known for its role as the British and Commonwealth forces' primary infantry LMG in World War II, it was also used in the Korean War and saw service throughout the latter half of the 20th century, including the 1982 Falklands War. Although fitted with a bipod, it could also be mounted on a tripod or be vehicle-mounted.
The Bren gun was a licensed version of the Czechoslovak ZGB 33 light machine gun which, in turn, was a modified version of the ZB vz. 26, which British Army officials had tested during a firearms service competition in the 1930s. The later Bren gun featured a distinctive top-mounted curved box magazine, conical flash hider, and quick change barrel. The name Bren was derived from Brno, the Czechoslovak city in Moravia, where the Zb vz. 26 was designed (in the Zbrojovka Brno Factory) and Enfield, site of the British Royal Small Arms Factory. The designer was Václav Holek, a gun inventor and design engineer.
In the 1950s, many Bren guns were re-barrelled to accept the 7.62×51mm NATO cartridge and modified to feed from the magazine for the L1 (Commonwealth version of the FN FAL) rifle as the L4 light machine gun. It was replaced in the British Army as the section LMG by the L7 general-purpose machine gun (GPMG), a heavier belt-fed weapon. This was supplemented in the 1980s by the L86 Light Support Weapon firing the 5.56×45mm NATO round, leaving the Bren gun in use only as a pintle mount on some vehicles. The Bren gun was manufactured by Indian Ordnance Factories as the "Gun Machine 7.62mm 1B"[3] before it was discontinued in 2012.[4]
I guess it is kinda weird to see but hey if the build is good and it has effort put into it why not check it out? Isn't simpleplanes about making planes that fly and not about upvotes?
When I used to make ships, I split the hull into two fuselages. The top fuselage is where the buoyancy is and the bottom is used to give the ship displacement. Hope this helps. :)
At first, I thought the explosion was edited but then I rewatched it several times and realized that it's not! How did you make the explosion look like that?
@Xenotriver I have read some stuff that doesn't use yaw as stabilization like airbrakes, thrust differential, etc., I am not an experienced Funky tree user so those are out of my league.
Words cannot describe how detailed this is. It's like I am looking at a 3D model rather than a build. This is awesome.
I hope it's a shopping cart with an L/20 120mm smoothbore cannon strapped onto it with just duct tape
+1The Bren gun is a series of light machine guns (LMG) made by Britain in the 1930s and used in various roles until 1992. While best known for its role as the British and Commonwealth forces' primary infantry LMG in World War II, it was also used in the Korean War and saw service throughout the latter half of the 20th century, including the 1982 Falklands War. Although fitted with a bipod, it could also be mounted on a tripod or be vehicle-mounted.
The Bren gun was a licensed version of the Czechoslovak ZGB 33 light machine gun which, in turn, was a modified version of the ZB vz. 26, which British Army officials had tested during a firearms service competition in the 1930s. The later Bren gun featured a distinctive top-mounted curved box magazine, conical flash hider, and quick change barrel. The name Bren was derived from Brno, the Czechoslovak city in Moravia, where the Zb vz. 26 was designed (in the Zbrojovka Brno Factory) and Enfield, site of the British Royal Small Arms Factory. The designer was Václav Holek, a gun inventor and design engineer.
In the 1950s, many Bren guns were re-barrelled to accept the 7.62×51mm NATO cartridge and modified to feed from the magazine for the L1 (Commonwealth version of the FN FAL) rifle as the L4 light machine gun. It was replaced in the British Army as the section LMG by the L7 general-purpose machine gun (GPMG), a heavier belt-fed weapon. This was supplemented in the 1980s by the L86 Light Support Weapon firing the 5.56×45mm NATO round, leaving the Bren gun in use only as a pintle mount on some vehicles. The Bren gun was manufactured by Indian Ordnance Factories as the "Gun Machine 7.62mm 1B"[3] before it was discontinued in 2012.[4]
+4@PANZERDOG 100% unfiltered pain :(
+1@PlanariaLab Neat! I am looking forward to it!
I was thinking of an Arcade Building on the first floor and a Cafe on the second floor.
I was thinking of an Arcade Building on the first floor and a Cafe on the second floor.
Le Smoothe
+1Very nice!
+1I swear I have seen this face before... I can't remember where...
+4That would be cool. Maybe wing guns should be customizable as well.
+1Skate shoes are cool
The Flag. Definitely the Flag.
Bruh
I guess it is kinda weird to see but hey if the build is good and it has effort put into it why not check it out? Isn't simpleplanes about making planes that fly and not about upvotes?
This is just a normal 737 max video. 0/10
VRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR DING BEEP BEEP BEEP BEEP BEEP BEEP BEEP
(How did you make him glow doe)
Imagine an M2 browning coming at you at a hundred miles per hour, guns blazing. Terrifying.
Very nice build!
@Horsepower Quite indeed.
@Horsepower Donkey is Donkey
It's a paradise
+1@Horsepower Donkey.
Arkbirb
+1donkey
@Viridi yep, Snowflakes has a website for Funky Trees, https://snowflake0s.github.io/funkyguide.html#sectionthree here is the link
@Viridi FT is basically complex inputs. You can use FT on your turret to automatically aim and lead at a target.
owo
I am having PTSD from this 10/10 very accurate
+1Ah yes, the all-powerful tonk
When I used to make ships, I split the hull into two fuselages. The top fuselage is where the buoyancy is and the bottom is used to give the ship displacement. Hope this helps. :)
@Maxwell1 Hey :)
@Grob0s0VBRa 0% progress at all lmao, I haven't been able to touch it let alone play SP since I am busy with school.
@Mage2IsTriggered
Pretty well I guess, I haven't been able to continue my works in SP ever since school has started which is a bummer. :(
This is very nice!
+1Modernized Foch go brr
+1Modernized Foch go brrr
At first, I thought the explosion was edited but then I rewatched it several times and realized that it's not! How did you make the explosion look like that?
This is so beautiful
+1This is very epic.
+1This is so cool! Imagine using this on CIWSs on ships.
+2@OPaiTaOn Yep.
If I recall correctly, there is a new attribute for missiles which is called waterproof(?) I am not sure though. You can check the 1.9 update notes.
Edit: Just checked the 1.9 update and it's called "waterproof".
@DarthAbhinav Ah darn. :( I guess I can try Deathtrap's way then. Thank you for the link though! I can use it when I can get a laptoo in the future.
+1@DarthAbhinav I didn't knew this existed! Does this work on mobile as well?
Thanks, guys. :)
+1@jamesPLANESii Yeah :( I may have to use a hidden rudder or something else.
@Xenotriver I have read some stuff that doesn't use yaw as stabilization like airbrakes, thrust differential, etc., I am not an experienced Funky tree user so those are out of my league.
@AustralianBoi I guess that would work but I want to make my aircraft to have no tricks like that.
@PilotRoazille I tried that but it looks unnatural when the plane was flying.
+2