Say hello to my third ever bush plane, the Martin SnoBear™. It is a Push-Pull Counter-Rotating Prop “Fifth Generation” Bush Plane. With two engines, excellent STOL and plenty of room for luggage the Martin SnoBear™ is the ultimate bush plane. Now with Skis
This Airplane Is a HEAVILY Modified version of my Martin Timberwolf. It has Skis, and many fixes from the original.
Features List:
-Crazy Good Suspension
-Custom Bush Skis
-Custom Cockpit Instruments
-Tail Wheel Suspension
-Steerable Tail Wheel
-Really Good STOL
-Airbrakes
-Exhaust
-Realistic Performance
Controls and User Manual:
AG1- Engine 1
AG2-Engine 2
AG3- Lights
AG7 Emergency Fuel Dump
LandingGear-Open Front Hatch+Fold Control Panel for Loading
Notes:
-It has realistic performance, but it is still maneuverable enough to get you out of a jam
-Stall Speed is 50 MPH
-The Skis are fun to land with
-If you get yourself into a stall, Power up, Pull up and Pop the Flaps
Original Blueprints:
Blueprints
Thank you, and Enjoy,
Chancey21
Specifications
General Characteristics
- Created On Mac
- Wingspan 29.1ft (8.9m)
- Length 24.8ft (7.6m)
- Height 11.1ft (3.4m)
- Empty Weight 701lbs (318kg)
- Loaded Weight 2,668lbs (1,210kg)
Performance
- Power/Weight Ratio 10.104
- Horse Power/Weight Ratio 0.224
- Wing Loading 6.2lbs/ft2 (30.1kg/m2)
- Wing Area 432.6ft2 (40.2m2)
- Drag Points 6486
Parts
- Number of Parts 382
- Control Surfaces 11
- Performance Cost 1,661
Thanks @BogdanX
@Chancey21 you should, you'd be awesome at it
No I havnt
Thanks @Jetpackturtle
Awesome plane! Have you tried making a buggy? You're really good at tube frames :)
@Chancey21 mkay
Actually it wouldn’t BECAUSE I checked the flow of air around the body and the air swirls backwards into the prop @Indecision
@Chancey21 the massive inlet piece directly behind the props woild make it impossible for those props to generate lift
Lol! Ok@Chancey21
Pretty swanky@Chancey21
XD that’s because of the jets I used to simulate exhaust @CrazyInventor
Darn it, guess I’m going to have to make a seaplane version to fix it XD @jamesPLANESii
And where is the prop obstructing? @Indecision
The wings are JUST big enough with the combination of low CoT to get it STOL @Indecision
XD yes it’s my third I fixed it @ThePilotDude
lol @Chancey21
Whoa whoa whoa Chancey... your second bush plane? I counted three. Anyway, great job! Planes with skis are pretty cool
I like it, but the main wings are a little too short for an STOL, and the part the tail is connected to obstructs the props.
Rudder goes in wrong direction
they are based on real ones
But they do look like sleds XD @CRJ900Pilot
Kool!
Lol the skies look like Walmart sleds. Nice job tho
No problemõ@Chancey21
Thanks @KidKromosone
Neato