Northeast Section
Southeast Section
Here is the southwest section of Peacetown.
This one has a little less lag than the southeast section and more than the northeast section and all are now useable.
It runs best if you eliminate drag calculations from your build to maximize your processing power. It's easy to do with a text editor that has the 'replace all' function and would be happy to show you if you have questions.
Clock on the tower was by iwannabeelected. It tells time on a thirty minute day.
Here are some pics of me driving on it with my 499 part, zero drag calculation peterbilt 359.
And here is where I place it.
Specifications
Spotlights
- jamesPLANESii 4.1 years ago
- GreatHenry 4.1 years ago
General Characteristics
- Created On Android
- Wingspan 695.5ft (212.0m)
- Length 695.5ft (212.0m)
- Height 76.1ft (23.2m)
- Empty Weight 110lbs (50kg)
- Loaded Weight 110lbs (50kg)
Performance
- Horse Power/Weight Ratio 13.607
- Wing Loading 0.1lbs/ft2 (0.7kg/m2)
- Wing Area 773.0ft2 (71.8m2)
- Drag Points 0
Parts
- Number of Parts 857
- Control Surfaces 17
- Performance Cost 5,352
@Thunderhawk thankes
@DickBrazen No problem
@tsampoy thanks
@DickBrazen
Ok.
@DickBrazen
No problem
@GreatHenry and @Planeacceleration thanks both
@scratch yup
@DickBrazen thanks for the tip!
So how I do it is put into the search bar,
partCollisionResponse
exactly as shown with the capitalization (though I didn't reference that so find SimpleCheats and the Ultimate Guide to xml Editing in the forums and look).
Then in the Replace With box, enter,
calculateDrag="false" partCollisionResponse
Before you do all that, make a backup of your build and also make sure that no parts have false calculateDrag
If your search does bring up some parts that already have it, just enter
calculateDrag="false"
and Replace All with just a blank space (as in just hit the space bar once in that field)
@DickBrazen I just realised that I cant just find the calculateDrag and replace it, how do I put calculateDrag on the lines? or do I just copy and paste manually? thanks
@scratch hey, no problem, just so you know, if you have something with drag already turned off, you'll have to first replace that with a blank space so you don't have the same command twice in the same part.
oh the replace all function on text editors,
thank you for that idea!
@Aarons123
@Ultra0
@jamesPLANESii
Thanks everybody