For 1.11 version, added some engine starting things.

Credits : the slides by BaconAircraft on realSavageMan's A318 and FMS panel by JuanNotAnAlt

mobile version(690p without hollow fuselage)
(old)full interior version(3000p)
(old)no interior version(2033p)

I omitted many buttons and switches because i am lazy:)

To start the engines, you need to turn on the batteries first(the two big buttons above your head), and then turn on the APU master and turn on the APU(two buttons above the windshield), then turn on the engine master and turn on the two engines(circular button and switches below the throttle).Once the engines are turned on, you can shut off the APU.

If you pressed the red buttons, maybe you are not able to restart the engines again.

The control surfaces and the flaps, trim and landing gears are able to work only when the APU is on.

Before taxiing, disable the parking brake first. Use yaw(there is a handle beside the joystick)to turn.

The FMS panel has no use, activate1 to make it glow.

There are two small panels below the screens. turn on the switches to pull them out.

Activation groups:
ag6,ag2:open the doors
ag3:open all doors and release all the emergency slides
ag4:open the cargo doors
ag5:thrust reversers(throttle at idle)
ag7:detach the emergency slides
Trim:trim
VTOL down:flaps

Try to land it smoothly at about 280km/h(151kt,174mph) because the engines are close to the ground
40% power to cruise at 38000ft(i don't know how to make the autopilot).

HAVE FUN!