Inspired by the Cirrus SF50 Vision Jet!
DESCRIPTION
This is a single jet turbofan, light four-seat aircraft with "gullwings" and new retractable landing gears with large wheels. Approved for dirt, grass and gravel landings. The powerhouse is a microjet engine mounted at the v-tail section of the fuselage. This aircraft comes equipped with an emergency parachute!
CONTROLS
AG1 - Landing Lights
AG2 - Emergency Parachute
AG8 - Beacon/Navigation Lights
NOTE
AG2 also activates gyro to stabilize aircraft during emergency decent with parachute.
AASI
Specifications
General Characteristics
- Successors 2 airplane(s) +7 bonus
- Created On Windows
- Wingspan 44.0ft (13.4m)
- Length 21.1ft (6.4m)
- Height 10.1ft (3.1m)
- Empty Weight 1,689lbs (766kg)
- Loaded Weight 1,689lbs (766kg)
Performance
- Power/Weight Ratio 79.798
- Wing Loading 10.7lbs/ft2 (52.4kg/m2)
- Wing Area 157.4ft2 (14.6m2)
- Drag Points 4539
Parts
- Number of Parts 101
- Control Surfaces 5
- Performance Cost 631
This account is dead, isn't it?
Cool!
@jamesPLANESii
thx. ill look into that
There’s a new thing with the Overload mod where you can now scale the drag of parts. You should try it out.
@jamesPLANESii thanks for feedback!
a compacted, light aircraft is always my goal. the drag is caused by the wings. and yes, it is far too fast for the size of the engine, but its fun to get around the map fast. plus land with about 2% throttle.
rEpLiCa
I hope my advice is helpful
Also it’s a bit too short. I know stubby and bubbly is your style, but this is a bit excessive.
It’s miles too fast. It has a very tiny engine which irl would probably only make maximum of about 1000lbs of thrust. This should get it to about 150-200mph. But this hoes in excess of 500mph. That is completely ridiculous. Also it has far too much drag, and it makes landing without diving straight into the ground really difficult.
@Ahtzee anytime.
@AWESOMENESS360 @Carbonfox1 @randomusername
thank you everybody!
This looks really nice! I made a cirrus before, and this does looks a lot like one. Good work!
Itty bitty and awesome