My new plane is almost finishes and the only thing i need to do is the landing gear, I've asked for some help but due toblack of responses I'll just do it myself
My new plane is almost finishes and the only thing i need to do is the landing gear, I've asked for some help but due toblack of responses I'll just do it myself
Go to mods-overload mod activate-use a hinge rotator and make the bottom like landing Gear-drag the mouse to hinge rotator-open overload mod-go to input controller-right this LandingGear and then change min to 0 and if the landing gears are going opposite side just invert them
Coba lakukan dengan funky trees buat pada rotator pemasuk roda Tulis LandingGear dan pada penutupnya yaitu floor(smooth(clamp01(LandingGear), 0.5)) maaf jika saya salah saya hanya mencoba membantu
Make an unlisted project and tag me
Ill try to help
If you use iOS like me, It’s a no-go. Just ask someone to XML the landing gear.
Also depends if you're building on iOS or PC or Android. XML modification, either by going to the aircraft file or using the Overload mod to the basic SP program is not possible if you're on iOS. You'll have to disable collisions and set a rotator to "LandingGear", not possible to do yourself on iOS. However, if you're on PC or Android, you should be able to make the mods necessary for custom landing gear. However, if on iOS, you may be able to do what @F104Deathtrap says, use the gear from his or another builder's creation, change as necessary and stick it on yours.
yawn, a bit of politeness goes a long way, do as Deathtrap says, download someones, see how they do it and then build your own, its a simple as using a rotator with it on landing gear and -1 changed to 0, then add your shapes.
You can tear the landing gear off of one of my planes if you want. You'll probably need to reshape it to fit yours, but it shouldn't be too much trouble.
When you said toBlack you meant to lack right
Use a rotator on landing gear activation and use disabled aircraft collision parts for the gear itself