wait, LDD is still alive?! I used to spend hours playing and designing in that game lol. I knda miss some of it's features here in SP, like rotating parts by the hinges...
@DemonSniper8 I think you meant scaling the whole car I guess. Only issue is that that method tends to gets parte stuck...(happened with some of my piston engines, so instead I do thr parts with low dimensions from the beginning and a ton of patience)
@DemonSniper8 I used custom mass according to the material, as it usses metal for the chassis but Kevlar and carbon fiber for the side panels etc, so the car has a mix of parts with different mass settings. It was a whole mess to config what was what xd.
ok, seeing your paintjobs, is it a signature of yours to have the left aleiron and taileron painted in Red? also I need a serial number so it can be identified as your airforce (BNRV-60,52, etc)
is safety in the list too? I have a Jet from 6 months ago that was built for ground attack, and is one of the safest aircrafts I've ever built, can fly without an engine or even missing an entire elevon or part of the wing and return to base. or even take off without repairs for the next mission without worries xd
@CRJ900Pilot I disconnected it because it was causing troubles, but if you want it to spin, set your nudge to 25%, set connected parts and drag down the fan from the rotator.
this might be too much to ask, but can we get a 1widex1heightx0.5lenth engine block? like a 800cc-1000cc Inline 4 engine? with hp ranging from 5-50hp and 11k rpm. it would be perfect to fit in smaller builds or bikes. resizable shocks would be perfect for this too, so we can get very small shocks for low travel vehicles.
have some dihedral on your wings, so it centers itself while flying. use fuselage blocks as yaw surfaces, for a more smoother yawing, and as others say, more drag at the back.
@AdlerSteiner cool!
for this car(E30) I wanted to do the BMW Power livery, but I ws too lazy to do it xd, also the car was smashed to a wall during a tournament, so even if I put the livery, it wouldn't have been of much help xd
@Minecraftpoweer many of us have long awaited a mod to put actual working tracks on our tanks without adding 1000 parts worth of tracks(I'll probably join soon).
totally relatable, I have celiac disease and a gluten free pizza is a true blessing, but if the people handling stuff inside dont care about higienics and cross-contamination, it kills all the hype for buying a pizza with your friends, it's not funny to have to cross half the city to just buy pizza when everyone can get it everywhere T-T.
nice desing, but dont put all the fuel on the back, try to put the fuel on the center of mass, also rearrange your rear landing gear more closer to the "new" center of mass. very good aircraft overall, good luck!
watched a gameplay and I'm in love with the layout and being able to program every detail! I hope simpleplanes implements a gearbox soon, as it is very needed for different tipes of vehicles, so you dont put an excesive power to run a truck when it only needs some reductions and more torque
that's amazing mate! may I ask, could you test in CFD one of my aircrafts?
@GenrichTitov guess we both come from the same root hahahah, might download LDD again, do you have a link?
yay! btw, I have an airsoft UMP.45, gotta love that SMG
wait, LDD is still alive?! I used to spend hours playing and designing in that game lol. I knda miss some of it's features here in SP, like rotating parts by the hinges...
@Mumpsy @DemonSniper8 @TrainDude thank you very much guys!
@DemonSniper8 lol
@DemonSniper8 I think you meant scaling the whole car I guess. Only issue is that that method tends to gets parte stuck...(happened with some of my piston engines, so instead I do thr parts with low dimensions from the beginning and a ton of patience)
@DemonSniper8 I used custom mass according to the material, as it usses metal for the chassis but Kevlar and carbon fiber for the side panels etc, so the car has a mix of parts with different mass settings. It was a whole mess to config what was what xd.
ok, seeing your paintjobs, is it a signature of yours to have the left aleiron and taileron painted in Red? also I need a serial number so it can be identified as your airforce (BNRV-60,52, etc)
@Remote I glad you like it! Have fun driving it! >w<
@thank you very much Struller78
no more than 650 parts R.I.P. Audi Quattro
is safety in the list too? I have a Jet from 6 months ago that was built for ground attack, and is one of the safest aircrafts I've ever built, can fly without an engine or even missing an entire elevon or part of the wing and return to base. or even take off without repairs for the next mission without worries xd
@JoshuaW
Really awsome creation! works flawlessly!
Mind asking, could you make me a set of gears? like a 3:1, 2:1, 1:1, 1:2
@Texasfam04 thank you very much!
@sexylips35 thx!
@Theplanelover77 @Tylerdeveneuzmusic @SodiumChloride thank you very much guys!
@AchuTMM my previous engine was as big as a DB609, so I wanted to make a small and efficient piston engine small enough to fit on a 1:1 car
@getorge @CRJ900Pilot @Spikerya thank you very much guys!
@CRJ900Pilot I disconnected it because it was causing troubles, but if you want it to spin, set your nudge to 25%, set connected parts and drag down the fan from the rotator.
@KerlonceauxIndustries thank you very much!
this might be too much to ask, but can we get a 1widex1heightx0.5lenth engine block? like a 800cc-1000cc Inline 4 engine? with hp ranging from 5-50hp and 11k rpm. it would be perfect to fit in smaller builds or bikes. resizable shocks would be perfect for this too, so we can get very small shocks for low travel vehicles.
have some dihedral on your wings, so it centers itself while flying. use fuselage blocks as yaw surfaces, for a more smoother yawing, and as others say, more drag at the back.
make rally versions!
@JetFly hahahaha
@DemonSniper8 ok ;)
@DemonSniper8 wow, now that's scary! stay safe mate!
@JetFly I thought you would say that the blinkers finally work hahahahaha
@DemonSniper8 would you do an evaluation on the car? or do I have to make it sucessor?
@JetFly thank you very much! hope you have fun with it, and honestly, put whatever you want on this thing xdd
@DemonSniper8 1) it could win 2) it can literally take the corner at the wrong speed and crash lmao
@AndrewGarrison ok, thank you very much!
@AndrewGarrison I need your help, the photos have stopped showing, why could that be?
can I enter this?
lots of classwork and other games too...still waiting for the Rally championship to happen.
Totally not WarThunder...
@AdlerSteiner ikr
@AdlerSteiner cool!
for this car(E30) I wanted to do the BMW Power livery, but I ws too lazy to do it xd, also the car was smashed to a wall during a tournament, so even if I put the livery, it wouldn't have been of much help xd
Nice paintjob mate! and yes, you should build the E46!
maybe a simple jet interceptor or a strong ground attack jet
@Minecraftpoweer many of us have long awaited a mod to put actual working tracks on our tanks without adding 1000 parts worth of tracks(I'll probably join soon).
good memories hahahah
I'm in love with this mod
@BACconcordepilot can totally relate to that mate, place your bets guys, or hospital or a good snack!
totally relatable, I have celiac disease and a gluten free pizza is a true blessing, but if the people handling stuff inside dont care about higienics and cross-contamination, it kills all the hype for buying a pizza with your friends, it's not funny to have to cross half the city to just buy pizza when everyone can get it everywhere T-T.
nice desing, but dont put all the fuel on the back, try to put the fuel on the center of mass, also rearrange your rear landing gear more closer to the "new" center of mass. very good aircraft overall, good luck!
watched a gameplay and I'm in love with the layout and being able to program every detail! I hope simpleplanes implements a gearbox soon, as it is very needed for different tipes of vehicles, so you dont put an excesive power to run a truck when it only needs some reductions and more torque
sorry, but everytime I want to update the mod, it just keeps downgrading to 1.0....
umm...how do I update a mod?