@WinsWings You made a bunch of changes. I like them all. The leading edges of the wings looks like it took a while to get all the calculations correct. Fun fact : did you know that when you make a label,in the "text box" start with this. <b> ZaineMan this "<b>" as your leading command with make your text BOLD. Or go <i> (that's the letter i ) and it will italicize whatever you put after it. Or <u> for underline. Cool huh ? So you could write. <b><i>WinsWings is the man. And it will type out that sentence in bold and it will italicize it.
@IceCraftGaming Wow !! What a great airplane !! The Avenger ! That was fun ! I took one of your interceptors and put it in my sub assemblies and called it "The IceCraftGaming Interceptor" lmao..... Did you use a mod to do the doors underneath or did you do that yourself ?
@WisconsinStatePolice Did you know that the original designation of this aircraft was the "RS - 71 Blackbird" ? But President Johnson publicly called it the "SR - 71 Blackbird" so the designers said "Well,it's the SR - 71 Blackbird now huh , lol" and that's how It got its name. ;)
WinsWings, this is very nice. Thanks ! ! Right now I'm working on a Cirrur Jet SF50. It does 1400mph + and you can go crazy with the yoke and it flies where you wanted to. It won't spin out of control. But you do have to be careful taking off, you can't just gun it. The plane will spin all over the place. Lol but once you're in the air you're not going to believe it. I'm almost finished.
@CRATE52PART2 ok, I lengthened it while trying to get it to fly correctly, it was spinning out of control. I did figure out what was wrong and it wasn't how long that piece was, a bigger tale is what was needed. I will shorten the fuselage
@WinsWings I'm going to post a windscreen for you. It's pretty good, it's 3 wide and 3 tall. But I knocked 50% of the bottom off of all the parts. It should be pretty easy to manipulate. Windscreens I've given me a just a complete headache, so I hope this helps.
@WinsWings I am only about 1 month in front of you so we can help each other. I'm almost ready to post the BeachCraft. Again,too bad it looks like any other plane. I put a ton of work into it. The instrument panels really slick. Z
@WinsWings Maybe you already know this but I just figured out and it was a huge source of frustration. I was working on a plane and it flew fine, then all of the sudden when I would do a turn to the right it would suddenly spin to the right and crash. The same thing to the left. As it turns out all I had to do was increase the size of my tail and it fixed the problem every time, every plane. I hope this helps.
@WinsWings you know how it is, fighting with every little thing. The simplest things could take hours to get right. I'm OCD so that makes it worse. Making a windshield is an absolute bear.
@WinsWings the instructions I gave you will create a display you can put on your aircrafts instrument panel. It will show you your trim but it will also show you your trim in negative numbers. +100‰ to -100%. I've never seen this done. Also it will show you the status of your arrestor hook. Up,Moving,Down... I made this label myself based on the research I've been doing the past few days. I've also been working on a Beachcraft King 250 for about a week. I doubt most people will be interested because it's civilian, but I know you'll download it and give it a try because we're friends. Z
@WinsWings Assign activate 2 to your landing Hook, open a brand new label from the cockpit section and copy and paste this into the label text :. <alpha=#ff>L-HOOK:<pos=33%><alpha=#FF>{smooth(clamp01(Activate2), 0.25) = 0 ? "UP" : (smooth(clamp01(Activate2), 0.25) = 1 ? "DOWN" : "MOVING")}<br><alpha=#ff>TRIM:<pos=31%><alpha=#FF><mspace=.5em>{Trim*-100;f0} %
@WinsWings no problem, careful with the colors you start messing around with the colors you could go down a black hole that could last for hours. The background for the radar the round part is actually a beacon light set to be on all the time. So when you choose a color for that if you decide to change it remember that beacon lights going to come on and make anything you did brighter. You can also make it flash slowly or quickly. The needle that spins around is actually another beacon light but scale was used to radically change the shape of the thing into a tiny tiny stick. So, seeing how that is also a beacon light you can also make that either stay steady, blink fast or blink slow. I did the blinking stuff with all the various parts, it's just kind of annoying. I think it works better if it just spins around that way you can pay close attention to the red boxes which are obviously the enemy and the closer they get to the center of the circle the closer they are to you.
@EasternPatrick thank you very much EasternPatrick. I know, it is something isn't it ? Lol . The afterburners add four more colors because I stashed four VTOL nozzles in each engine. If my memory serves me the colors are black, red, blue, Orange again that's for the switchable afterburners.
@WinsWings my tablet is 12 in and I can hardly read the numbers as well. I just rely on the fact that once I tap the section I need to make adjustments to at least I can read where I'm putting in my input. But yes I hear you, it is small... You can also select my weapons and put them in your sub assembly. For instance, select the cleaver, manually disconnect it (remember to always disconnect), then drag it into your sub assemblies and name it Nuclear cleaver. You can do this with everything, my radar, anything in my cockpits, interceptors, bombs you name it.
@MyReaktorIsLeak Thanks. FUN = Go to Wright Airport, don't take off. Turn on the Yeet Detector. Select the Yeet Detector in weapons list. Target aircraft carrier even though it may say obstructed. Select Yeet Cannon Press fire button only for a few seconds to get about 10 rounds off. Watch the aircraft carrier disappear from tracking. You can do the same with both destroyers. When you're in the air using the Yeet Cannon, short bursts every few seconds are more effective at ground targets while you're flying. You can even shoot aircraft, but it helps if they're flying straight at you and they're close. It's hard but not impossible.
@WinsWings I just posted a universal cockpit with you in mind. With minimal modifications you can put it on an aircraft, put a canopy on top of it and it will save you a bunch of work !
@SkyJayTheFirst I know Guyfolk (I follow him) his work is amazing ! I love this one plane of his where doors pop open under his aircraft and he has a rotating missile Bay and a self aiming railgun. Not unlike the detector Cannon
@WinsWings Also, shoot at an Aircraft Carrier with a Nuclear Cleaver and stay 3.5 miles away upon detonation. Carriers make the coolest targets when they blow up from a nuclear cleaver.
@SkyJayTheFirst , I plan on editing my description to give you credit. Those engines are a work of art and must have taken forever to build. All of the lights inside the engines set to light up at different levels of thrust. I counted at least 4 different stages of different lights. I think that most people would not notice just how sweet they are. I play on a tablet and know nothing about thrust vectoring. So, I grabbed your engines from the "Rotator" on back and put them in my sub assemblies and labeled them right thrust vectoring engine and left thrust vectoring engine. Lol Anyways props on the engines, they are simply a work of art.
@Quebecor Thanks, the engines in the high part count version are nice. They came off the F-300-A3 StarHawk built by SkyJayTheFirst. I messaged SkyjayTheFirst to see if they built by them. If so, I plan on editing my description to give them credit. Those engines are a work of art and must have taken forever to build. All of the lights inside the engines set to light up at different levels of thrust. I counted at least 4 different stages of different lights.
Did you make the engines on this aircraft ? They are a work of art and I want to see if you made them. If so,I will give you credit on my plane "Z-29 Super Yeet Detector"
please try my new Z-29 Super Yeet Detector. I worked really hard on it. Aside from the moving wings it's not really the same plane anymore. It now has 2 thrust vectoring engines, all new radar system with enemy tracking and distances. Improved avionics package. Nuclear cleavers, air brakes, dual carrier cable landing hooks. The list just goes on and on. Tell me what you think
@WinsWings Your original design plus my thrust vectoring and self aiming cannon has to be one of the tightest turning fighters I've ever flown. I think it's my favorite plane....
I pulled the trigger on the 20 mm Cannon and the entire plane exploded. Lmao... But the plane itself is pretty slick flies great looks awesome
+1@WinsWings You made a bunch of changes. I like them all. The leading edges of the wings looks like it took a while to get all the calculations correct. Fun fact : did you know that when you make a label,in the "text box" start with this. <b> ZaineMan this "<b>" as your leading command with make your text BOLD. Or go <i> (that's the letter i ) and it will italicize whatever you put after it. Or <u> for underline. Cool huh ? So you could write. <b><i>WinsWings is the man. And it will type out that sentence in bold and it will italicize it.
+1@IceCraftGaming Wow !! What a great airplane !! The Avenger ! That was fun ! I took one of your interceptors and put it in my sub assemblies and called it "The IceCraftGaming Interceptor" lmao..... Did you use a mod to do the doors underneath or did you do that yourself ?
+1@IceCraftGaming Really !? The faster = the more stable most of the time. I did not know that...... I'll be darn......lol
+1@WisconsinStatePolice Did you know that the original designation of this aircraft was the "RS - 71 Blackbird" ? But President Johnson publicly called it the "SR - 71 Blackbird" so the designers said "Well,it's the SR - 71 Blackbird now huh , lol" and that's how It got its name. ;)
+1@XQuebecorAirIndustries It's fantastic ! I wish I had your imagination
+1@BlackjackEagle @RaddieB
+1@IceCraftGaming lol
+1WinsWings, this is very nice. Thanks ! ! Right now I'm working on a Cirrur Jet SF50. It does 1400mph + and you can go crazy with the yoke and it flies where you wanted to. It won't spin out of control. But you do have to be careful taking off, you can't just gun it. The plane will spin all over the place. Lol but once you're in the air you're not going to believe it. I'm almost finished.
+1@X99STRIKER it was removed. And I completely agree.
+1@WinsWings yes you may post anything you like. I'm easy.....lol...
+1First time I flew this aircraft I did a Carrier landing and caught the 1rst wire. Wow this flies nice !
+1@CRATE52PART2 ok, I lengthened it while trying to get it to fly correctly, it was spinning out of control. I did figure out what was wrong and it wasn't how long that piece was, a bigger tale is what was needed. I will shorten the fuselage
+1@WinsWings you know I know that I can add weight and I've done it before, I just didn't want to resort to it, does that make sense ?
+1@WinsWings I cannot wait to show you the plane I've been working on for the past week. The Beechcraft King 250 dual prop
+1@WinsWings I'm going to post a windscreen for you. It's pretty good, it's 3 wide and 3 tall. But I knocked 50% of the bottom off of all the parts. It should be pretty easy to manipulate. Windscreens I've given me a just a complete headache, so I hope this helps.
+1@WinsWings I am only about 1 month in front of you so we can help each other. I'm almost ready to post the BeachCraft. Again,too bad it looks like any other plane. I put a ton of work into it. The instrument panels really slick. Z
+1@WinsWings Maybe you already know this but I just figured out and it was a huge source of frustration. I was working on a plane and it flew fine, then all of the sudden when I would do a turn to the right it would suddenly spin to the right and crash. The same thing to the left. As it turns out all I had to do was increase the size of my tail and it fixed the problem every time, every plane. I hope this helps.
+1@WinsWings you know how it is, fighting with every little thing. The simplest things could take hours to get right. I'm OCD so that makes it worse. Making a windshield is an absolute bear.
+1@WinsWings the instructions I gave you will create a display you can put on your aircrafts instrument panel. It will show you your trim but it will also show you your trim in negative numbers. +100‰ to -100%. I've never seen this done. Also it will show you the status of your arrestor hook. Up,Moving,Down... I made this label myself based on the research I've been doing the past few days. I've also been working on a Beachcraft King 250 for about a week. I doubt most people will be interested because it's civilian, but I know you'll download it and give it a try because we're friends. Z
+1@WinsWings Assign activate 2 to your landing Hook, open a brand new label from the cockpit section and copy and paste this into the label text :. <alpha=#ff>L-HOOK:<pos=33%><alpha=#FF>{smooth(clamp01(Activate2), 0.25) = 0 ? "UP" : (smooth(clamp01(Activate2), 0.25) = 1 ? "DOWN" : "MOVING")}<br><alpha=#ff>TRIM:<pos=31%><alpha=#FF><mspace=.5em>{Trim*-100;f0} %
+1Noice
+1This is a great flying plane. What a cool design.
+1@DARZAVIATIONOFICIAL lmao...lol....
+1@WinsWings I just uploaded it. Take it up and take some turns with it and tell me what you think of the handling.
+1@WinsWings that sounds really neat I can't wait to fly it.
+1The cockpit you guys made is fantastic ! Seriously, I really like it. Well done ! Z
+1@Quebecor Thanks, I was fighting this for hours and hours trying to get it to look correct and work properly.
+1@WinsWings sounds good when I get a chance I'll look at it
+1@WinsWings no problem, careful with the colors you start messing around with the colors you could go down a black hole that could last for hours. The background for the radar the round part is actually a beacon light set to be on all the time. So when you choose a color for that if you decide to change it remember that beacon lights going to come on and make anything you did brighter. You can also make it flash slowly or quickly. The needle that spins around is actually another beacon light but scale was used to radically change the shape of the thing into a tiny tiny stick. So, seeing how that is also a beacon light you can also make that either stay steady, blink fast or blink slow. I did the blinking stuff with all the various parts, it's just kind of annoying. I think it works better if it just spins around that way you can pay close attention to the red boxes which are obviously the enemy and the closer they get to the center of the circle the closer they are to you.
+1This looks great I can't wait to fly it in VR.
+1@IceCraftGaming @SkyJayTheFirst @Quebecor
+1@WinsWings @Brazuca @DARZAVIATIONOFICIAL
+1I don't think people appreciate just how difficult it was to make this...... I do....@DARZAVIATIONOFFICIALS @WinsWings @BRAZUCA
+1@Themanbehindtheslaughter Thank you so much that really means a lot to me ! Z
+1@EasternPatrick thank you very much EasternPatrick. I know, it is something isn't it ? Lol . The afterburners add four more colors because I stashed four VTOL nozzles in each engine. If my memory serves me the colors are black, red, blue, Orange again that's for the switchable afterburners.
+1@WinsWings no I don't even know what telegram is...
+1@WinsWings my tablet is 12 in and I can hardly read the numbers as well. I just rely on the fact that once I tap the section I need to make adjustments to at least I can read where I'm putting in my input. But yes I hear you, it is small... You can also select my weapons and put them in your sub assembly. For instance, select the cleaver, manually disconnect it (remember to always disconnect), then drag it into your sub assemblies and name it Nuclear cleaver. You can do this with everything, my radar, anything in my cockpits, interceptors, bombs you name it.
+1@MyReaktorIsLeak Thanks. FUN = Go to Wright Airport, don't take off. Turn on the Yeet Detector. Select the Yeet Detector in weapons list. Target aircraft carrier even though it may say obstructed. Select Yeet Cannon Press fire button only for a few seconds to get about 10 rounds off. Watch the aircraft carrier disappear from tracking. You can do the same with both destroyers. When you're in the air using the Yeet Cannon, short bursts every few seconds are more effective at ground targets while you're flying. You can even shoot aircraft, but it helps if they're flying straight at you and they're close. It's hard but not impossible.
+1@WinsWings I just posted a universal cockpit with you in mind. With minimal modifications you can put it on an aircraft, put a canopy on top of it and it will save you a bunch of work !
+1@SkyJayTheFirst I know Guyfolk (I follow him) his work is amazing ! I love this one plane of his where doors pop open under his aircraft and he has a rotating missile Bay and a self aiming railgun. Not unlike the detector Cannon
+1@WinsWings thanks,I took a screenshot of your instructions. I will give it a try.
+1@SkyJayTheFirst omg, I'm so sorry, I forgot to Upvote you and spotlight you . My bad....done...
+1@SkyJayTheFirst I will ! Thank you !
+1@WinsWings Also, shoot at an Aircraft Carrier with a Nuclear Cleaver and stay 3.5 miles away upon detonation. Carriers make the coolest targets when they blow up from a nuclear cleaver.
+1@SkyJayTheFirst , I plan on editing my description to give you credit. Those engines are a work of art and must have taken forever to build. All of the lights inside the engines set to light up at different levels of thrust. I counted at least 4 different stages of different lights. I think that most people would not notice just how sweet they are. I play on a tablet and know nothing about thrust vectoring. So, I grabbed your engines from the "Rotator" on back and put them in my sub assemblies and labeled them right thrust vectoring engine and left thrust vectoring engine. Lol Anyways props on the engines, they are simply a work of art.
+1@Quebecor Thanks, the engines in the high part count version are nice. They came off the F-300-A3 StarHawk built by SkyJayTheFirst. I messaged SkyjayTheFirst to see if they built by them. If so, I plan on editing my description to give them credit. Those engines are a work of art and must have taken forever to build. All of the lights inside the engines set to light up at different levels of thrust. I counted at least 4 different stages of different lights.
+1Did you make the engines on this aircraft ? They are a work of art and I want to see if you made them. If so,I will give you credit on my plane "Z-29 Super Yeet Detector"
+1please try my new Z-29 Super Yeet Detector. I worked really hard on it. Aside from the moving wings it's not really the same plane anymore. It now has 2 thrust vectoring engines, all new radar system with enemy tracking and distances. Improved avionics package. Nuclear cleavers, air brakes, dual carrier cable landing hooks. The list just goes on and on. Tell me what you think
+1@WinsWings Your original design plus my thrust vectoring and self aiming cannon has to be one of the tightest turning fighters I've ever flown. I think it's my favorite plane....
+1