@Otter0308 Check out my other PSM Aircraft. I believe there some that are even better like this One Everything I do, make, etc.. was taught to me, influenced, mentored by one person @guyfolk. He is the Post Stall Maneuvering master ! !
@Robomo00119 I am finished with your plane. It is now post stall maneuvering capable ! Click Here to see a video of it in action. But remember that in order to do these stunts, you MUST be at Stall speeds, hence the name. Post stall (After stall). So you get to Let's say 700 mph, well you would need to slow the aircraft to do these stunts. At that speed, first the plane will turn really hard until it bleeds off speed. Once it stalls that's when the fun begins. Don't forget to use orbit view. Z ;)
@IceCraftGaming have you flown it yet ? I can't take credit for how fast the plane's great flight characteristics and how fast it corrects itself after it does a post stall maneuver. This is all Rjenteissussy.
@GuyFolk I took your advice and that's the exact thing I did on the next build ! ! It bothered me as well seeing those engines go outside of the existing (engine surrounds). I was just too lazy to do anything about it and I had so much other stuff to do on the aircraft. It's so easy to get bogged down and spend too much time on a single light which is what I find myself doing. But you're right and so I did it with the next aircraft !
@WhiteHawk Thank you sir. A lot of different people were involved with building this. You know, the body, the engineering, the programming of the rotors, the weapons, but the cockpit is my baby ! It took me a long long time to tweak it just right.
@Robomo00119 It is a combination of 4 Main things. First, look at the programming of the 2 front rotors (they control the front control surfaces). Next, the rear rotors (for the rear control surfaces) different programming (but still needed). Next , the Thrust Vectoring (This is a must in my opinion). Lastly, in the build screen, pressing the button that looks like a seesaw with three circles on it. This of course shows you your center of mass center of lift and thrust. You want the red dot (center of mass) Just barely in front of the blue dot (center of lift). The closer that red dot is to the blue dot, the easier it will be to flip the plane over. If it flips too easy, add some dead weight in the nose of the aircraft to experiment with the weight. I hope this helps, feel free to ask me anything you like.
@SussyMilkArmsCompany the main aircraft with a flight computer in it is aircraft number one. Next, I pulled the computer off of it. It then turned gray and I slid it into my sub assemblies. Next, I pulled the planes out of my sub assemblies one by one and I connected them by their wingtips to plane number one's wingtips. And one by one I started connecting the planes to one another at the wingtips (minimum of two connections each). Every time I added a plane I test flew the pack to make sure it was connected. I hope that answers your question feel free to ask me anything else. Z ;)
@GuyFolk I don't know guyfolk I just kind of thought of it and I started laughing. This really isn't the reason but....I think the only planes I've ever gone into a flat spin are the ones I've made in your designs or your planes that I've screwed with. But I think basically It just jumped into my mind and I started laughing.
@Kiavash83724A Thank you. I try to keep my vids at 2 mins max. I hope people actually watch them and like them. Thanks again for the feedback, it really means a lot to me. Z ;)
@WINGSIRON I just chose some friends off the top of my head. I've known you since you were Brazuca when I first joined Simple Planes. We have been upvoting each other's planes for almost a year now..... Lol Z :)
@Coolman1011 I would change the engine power from 1 to 3. Also I played around with tails that were on angles like yours on an aircraft of mine and had some weird anomalies. I don't think you're having problems with your plane but if you ever do, try changing the two vertical stabilizers to straight up and down like an F-14. But other than being a little underpowered I like the plane
@Rjenteissussy You know, if you want, why don't you apply this formula to the Blue Angels. (Not version 2 which is coming (there are things going inside version 2 that you can't see))
Carrot, did you see your name on Blue Angel Plane # 6 and in the description of the build. Your name and call sign is on both sides of the aircraft just underneath the cockpit window. I think you'll like the pun for your call sign. Blue Angels post
New Vid for All new tighter turning Blue Angels Here I can't post until tomorrow on simple planes vids because I have posted too much today :( you guy will LOVE how tight and responsive these new planes are !! Z ;)
Use Orbit View on the camera, set time to Night, Wright Airport is a good one, Press Activate 1, Select Air to Air so you can shoot Flares. Then, while flares are in the air, shout "HURRAY FOR DARZ ! "
@MrKtheguy Thank you, It is from a company that has a TON of searchable (hard rock, metal, etc....) Music with no copyright ! www.epidemicsound.com I was paying $10 a month but then I canceled my subscription then I got an email saying I can't use the music if I make money off of it. Well, I'm not making any money so why not keep using it ? Z :) they even have descriptions of the music like angry, happy, running, chasing all kinds of stuff. Honestly I wind up pressing metal and listening to the first 30 seconds of a song to see if I like it or not. There's some good hard Rock that goes with our videos as well. But to each his own. In matters of taste, there's no dispute.........
@DESMONTHEWOLFIE Yeah, it was really for fun. A builder named @GigaChadFighterJet built an aircraft that was powered by a cannon (percussive power) so I modified his design a bit and built one as well. Then, I got a request for a VR
version from @Thatguy2020 (I think). Then @Khanhlam said Hey make one VTOL so here is that post..... Lol so yeah started for fun then it just went wild...... Z ;)
It's fun to set up your cameras in the planes to stay looking at the other Aircraft (Except Blue Angel One) Blue Angel Two's camera is especially cool because there is another Angel Right behind him ! !
@Thatguy2020 It's definitely the physics. Mine is set to medium. And I checked the cannons they're using basic rounds not exploding rounds. (I never even considered physics.... Duh.....my bad....) It's not like it's a great plane anyway it's just a novelty... Z ;)
@G2 How so ? Did you see the Vid and adjust the VTOL correctly ? Watch the very beginning of the vid here and watch me circle the VTOL slider with a pen , then adjust it up slightly into its correct position. Z :) When you make the correct adjustments, the cannons will all be pointing down and slightly backwards. BUT , you STILL have to pilot the plane and make adjustments to the yoke. That is, if you are upsidedown and hold down the cannons, well of course you're going to hit the ground.
@Thatguy2020 How so ? Did you see the Vid and adjust the VTOL correctly ? Watch the very beginning of the vid here and watch me circle the VTOL slider with a pen , then adjust it up slightly into its correct position. Z :) When you make the correct adjustments, the cannons will all be pointing down and slightly backwards. BUT , you STILL have to pilot the plane and make adjustments to the yoke. That is, if you are upsidedown and hold down the cannons, well of course you're going to hit the ground.
@winterro I never considered hinges as this was my first serious attempt to do this...but thanks for the idea... Z ;)
@winterro Thanks for the upvote ! Could I be joining the 70k club ? !
@TimsonAviation Thanks for the support !
@Rocketguy2079 I was bored and uninspired so thank you !
@Kiavash83724A Are you trying to make a PSM plane ? If so, post it PRIVATELY and then tag me
@Otter0308 Check out my other PSM Aircraft. I believe there some that are even better like this One Everything I do, make, etc.. was taught to me, influenced, mentored by one person @guyfolk. He is the Post Stall Maneuvering master ! !
@Rrhhyyss noice ! ! !
@Robomo00119 I am finished with your plane. It is now post stall maneuvering capable ! Click Here to see a video of it in action. But remember that in order to do these stunts, you MUST be at Stall speeds, hence the name. Post stall (After stall). So you get to Let's say 700 mph, well you would need to slow the aircraft to do these stunts. At that speed, first the plane will turn really hard until it bleeds off speed. Once it stalls that's when the fun begins. Don't forget to use orbit view. Z ;)
@Robomo00119 Im just teasing you about the upvote. Lol , I am almost finished with your aircraft ! Z ; )
@Robomo00119 I can try. But you didn't even upvote this build and you're asking for favors ? ! That's a little bit in bad taste don't you think ? Lol
@IceCraftGaming have you flown it yet ? I can't take credit for how fast the plane's great flight characteristics and how fast it corrects itself after it does a post stall maneuver. This is all Rjenteissussy.
@Deandash @SeeNoEvil @Khanhlam
@Bryan5 @MrCOPTY @Rocketguy2079
@ASBE @HamV2 @GorillaGuerrilla
@sus232 @IAlsoBuildPlane @WinsWings
@GuyFolk I took your advice and that's the exact thing I did on the next build ! ! It bothered me as well seeing those engines go outside of the existing (engine surrounds). I was just too lazy to do anything about it and I had so much other stuff to do on the aircraft. It's so easy to get bogged down and spend too much time on a single light which is what I find myself doing. But you're right and so I did it with the next aircraft !
@WhiteHawk Thank you sir. A lot of different people were involved with building this. You know, the body, the engineering, the programming of the rotors, the weapons, but the cockpit is my baby ! It took me a long long time to tweak it just right.
@Deandash Thanks 4 the upvote ! !
@Thatguy2020 hmm I will look at it...
@Robomo00119 It is a combination of 4 Main things. First, look at the programming of the 2 front rotors (they control the front control surfaces). Next, the rear rotors (for the rear control surfaces) different programming (but still needed). Next , the Thrust Vectoring (This is a must in my opinion). Lastly, in the build screen, pressing the button that looks like a seesaw with three circles on it. This of course shows you your center of mass center of lift and thrust. You want the red dot (center of mass) Just barely in front of the blue dot (center of lift). The closer that red dot is to the blue dot, the easier it will be to flip the plane over. If it flips too easy, add some dead weight in the nose of the aircraft to experiment with the weight. I hope this helps, feel free to ask me anything you like.
I wish I could have used this for my "Blue Angels" squad. Can you imagine all these part Times 6 ! ? ! Yeesh
@Fish83828 Did you like ?
@winswings @wingsiron @WolfHunter9111
@SussyMilkArmsCompany the main aircraft with a flight computer in it is aircraft number one. Next, I pulled the computer off of it. It then turned gray and I slid it into my sub assemblies. Next, I pulled the planes out of my sub assemblies one by one and I connected them by their wingtips to plane number one's wingtips. And one by one I started connecting the planes to one another at the wingtips (minimum of two connections each). Every time I added a plane I test flew the pack to make sure it was connected. I hope that answers your question feel free to ask me anything else. Z ;)
@GuyFolk I don't know guyfolk I just kind of thought of it and I started laughing. This really isn't the reason but....I think the only planes I've ever gone into a flat spin are the ones I've made in your designs or your planes that I've screwed with. But I think basically It just jumped into my mind and I started laughing.
@Kiavash83724A Thank you. I try to keep my vids at 2 mins max. I hope people actually watch them and like them. Thanks again for the feedback, it really means a lot to me. Z ;)
@Chikidoodle Thanks for the upvote ! You should try the latest version of this Here
Tighter turning Blue Angels Here
Thanks for the upvote. Fadepug, when are you going to build ? Start w blocks, gas tank, propeller, & wings. That's what I did. Z :) @Fadepug
@WINGSIRON I just chose some friends off the top of my head. I've known you since you were Brazuca when I first joined Simple Planes. We have been upvoting each other's planes for almost a year now..... Lol Z :)
@Thatguy2020 Just go into the cannon settings and add more shots......easy peasy...... Z ;)
@Coolman1011 I would change the engine power from 1 to 3. Also I played around with tails that were on angles like yours on an aircraft of mine and had some weird anomalies. I don't think you're having problems with your plane but if you ever do, try changing the two vertical stabilizers to straight up and down like an F-14. But other than being a little underpowered I like the plane
New Tight Turning Blue Angels version Download Here
@Rjenteissussy You know, if you want, why don't you apply this formula to the Blue Angels. (Not version 2 which is coming (there are things going inside version 2 that you can't see))
Sweet build. I know it's supposed to be an AI but would you mind if I put a cockpit in it one day ? Z ;)
Flew it ! !
Carrot, did you see your name on Blue Angel Plane # 6 and in the description of the build. Your name and call sign is on both sides of the aircraft just underneath the cockpit window. I think you'll like the pun for your call sign. Blue Angels post
New Vid for All new tighter turning Blue Angels Here I can't post until tomorrow on simple planes vids because I have posted too much today :( you guy will LOVE how tight and responsive these new planes are !! Z ;)
Use Orbit View on the camera, set time to Night, Wright Airport is a good one, Press Activate 1, Select Air to Air so you can shoot Flares. Then, while flares are in the air, shout "HURRAY FOR DARZ ! "
@MrKtheguy Thank you, It is from a company that has a TON of searchable (hard rock, metal, etc....) Music with no copyright ! www.epidemicsound.com I was paying $10 a month but then I canceled my subscription then I got an email saying I can't use the music if I make money off of it. Well, I'm not making any money so why not keep using it ? Z :) they even have descriptions of the music like angry, happy, running, chasing all kinds of stuff. Honestly I wind up pressing metal and listening to the first 30 seconds of a song to see if I like it or not. There's some good hard Rock that goes with our videos as well. But to each his own. In matters of taste, there's no dispute.........
@DESMONTHEWOLFIE Yeah, it was really for fun. A builder named @GigaChadFighterJet built an aircraft that was powered by a cannon (percussive power) so I modified his design a bit and built one as well. Then, I got a request for a VR
version from @Thatguy2020 (I think). Then @Khanhlam said Hey make one VTOL so here is that post..... Lol so yeah started for fun then it just went wild...... Z ;)
It's fun to set up your cameras in the planes to stay looking at the other Aircraft (Except Blue Angel One) Blue Angel Two's camera is especially cool because there is another Angel Right behind him ! !
Download the Blue Angels Here
@xNotDumb 10 days and my probation is over and I can put it back up (less the mild profanity that got it taken down and cost me a strike)
@Thatguy2020 It's definitely the physics. Mine is set to medium. And I checked the cannons they're using basic rounds not exploding rounds. (I never even considered physics.... Duh.....my bad....) It's not like it's a great plane anyway it's just a novelty... Z ;)
@sus232 How have you been Sus232 ?
@G2 OH, I'm so sorry... Duh, I misunderstood...... I always though cursed meant it was not airworthy. My apologies. Z :)
@G2 How so ? Did you see the Vid and adjust the VTOL correctly ? Watch the very beginning of the vid here and watch me circle the VTOL slider with a pen , then adjust it up slightly into its correct position. Z :) When you make the correct adjustments, the cannons will all be pointing down and slightly backwards. BUT , you STILL have to pilot the plane and make adjustments to the yoke. That is, if you are upsidedown and hold down the cannons, well of course you're going to hit the ground.
@Thatguy2020 How so ? Did you see the Vid and adjust the VTOL correctly ? Watch the very beginning of the vid here and watch me circle the VTOL slider with a pen , then adjust it up slightly into its correct position. Z :) When you make the correct adjustments, the cannons will all be pointing down and slightly backwards. BUT , you STILL have to pilot the plane and make adjustments to the yoke. That is, if you are upsidedown and hold down the cannons, well of course you're going to hit the ground.
@AnomalyYeet You know I'm kidding w you ! This is a great build ! Z ; )