@WardogLeader
Look at this post, that I made a while ago. It shows all the xml values. Do you know how to use that mod? It is the one that is automatically installed in everything, including mobile dvices.
@TinyMaus
And if there is not enough news, you could always chose a “plane of the month” to talk about, along with “best new mod” and other stuff like that. And then you could do the news all around that. If you read through the forums there is tons of news you could gather, both funny, and useful. You could also talk about what teasers have been posted recently, and say when they are coming out. It could be interesting. And you could end it with a simple planes weather report. That part would be easy: “no rain, ever! Maybe some clouds, but most likely a missile and bomb rain.”
I think that this is a really good idea, and you really should continue posting the WIW. I, for one would definitely read it.
@LunarEclipseSP
Where is the center of mass? I have noticed that if it is lower, it does usually turn better, but that really only helps to stop it rolling over. I would do this, and then add traction on the wheels. And some more weight. Maybe add some kind of downforce mechanizim.
I also have had this problem with cars. When I have more traction, it will flip over, and when I have less traction, it will do this. Idk what to do about it though.
Cool, but they are not doing updates anymore. (Insert sad face) However, vtol nozzles in Juno would be great, as they do not even have them yet. (As far as I know)
Cool! I would have made the doors slightly different though. If you go into imput controller on the mod thingie in the designer, it says range, and 1 and minus 1. If you set 1 of these to 0, it can only go outward, so the doors will not stick into the car, and still will open outward. (Ik I did not say this well, but tell me if you need more of an explanation. Still a really cool vehicle.)
It probably depends on the situation. However, if you are dumb, and given knowledge, it probably will not help you much, as you will lack wisdom to use it.
Thanks, and it’s good to see you know you were wrong. You cannot get better without doing that first. I hope to see some nice planes soon, as this is basically what the sp site is for, isint it?
here
I will put the comment her, so you can see this. I did not originally say this.
“ @BombBoi1822 if you have overload installed (go to the mod menu in the vanilla game) use this as the input in inputController in the engine: Throttle=1?5:Throttle. This changes the thrust output of the engine to 5 times otherwise when the throttle is set to full, and the thrust remains normal when the setting is below 100%. For the best effect with the exhaust and stuff I recommend using the BFE150 engine when using an afterburner. This, however, does not widen the exhaust, but you should be fine, as the exhaust looks like an afterburner is on when it is.”
What beautiful shapes! The triangles are just incredible! I have never seen a more perfect plane!
@SKLV95
Tag me, and I will.
@SKLV95
Thanks! I have actually never won a challagne before, so this is amazing!
@WardogLeader
Look at this post, that I made a while ago. It shows all the xml values. Do you know how to use that mod? It is the one that is automatically installed in everything, including mobile dvices.
Why?
What is this?
You can already do this. I would talk to some more expierenced players than myself, to instruct you how to, but this is not especially difficult.
The Stipa-Caproni
It’s a fun plane, and probably would not take too many parts.
+1How is it possible for your parents to recomend somthing kindly? Isint that impossible?
+2IDK. I also want to know this too.
+2@mrsilverwolf @baconaircraft @seeras
I somehow made this plane a sucssser to a private post, could you make it a success to this please?
This is so funny it deserves an upvote,
@TinyMaus
And if there is not enough news, you could always chose a “plane of the month” to talk about, along with “best new mod” and other stuff like that. And then you could do the news all around that. If you read through the forums there is tons of news you could gather, both funny, and useful. You could also talk about what teasers have been posted recently, and say when they are coming out. It could be interesting. And you could end it with a simple planes weather report. That part would be easy: “no rain, ever! Maybe some clouds, but most likely a missile and bomb rain.”
I think that this is a really good idea, and you really should continue posting the WIW. I, for one would definitely read it.
Nice!
+1@PowerStoneY
I know.
Please do, it was quite interesting, and there is literally nithing like it on the website.
@LunarEclipseSP
Where is the center of mass? I have noticed that if it is lower, it does usually turn better, but that really only helps to stop it rolling over. I would do this, and then add traction on the wheels. And some more weight. Maybe add some kind of downforce mechanizim.
@Majakalona
+1Good to know.
@LunarEclipseSP
+1Hasent it always been?
@Majakalona
+1Oh, I see. Cool idea. Maybe my next plane. Are there any specific requirements that need to be met to have your plane kerballized?
What do you mean?
+1I also have had this problem with cars. When I have more traction, it will flip over, and when I have less traction, it will do this. Idk what to do about it though.
+1It went great… until it didn’t.
+1Seriously though, I am surprised how much pounding it could take without breaking.
OHHH! SHINY!!!
+2Actually, this is a very cool plane, even with the limited parts.
Edit: Hey, nice biography! I agree with that wholeheartedly! I am homeschooled, and so I do get to avoid some of that, but it is definitely true.
+1100th upvote!
+1Cool! So detailed! How many parts at this point?
T. Also, your at gold now. Your welcome.
Cool, but they are not doing updates anymore. (Insert sad face) However, vtol nozzles in Juno would be great, as they do not even have them yet. (As far as I know)
Option 6
@SKLV95
Oh, just a free part?
@Kerbango
+1Yes, exactly. You put that a lot better than I did.
Cool! I would have made the doors slightly different though. If you go into imput controller on the mod thingie in the designer, it says range, and 1 and minus 1. If you set 1 of these to 0, it can only go outward, so the doors will not stick into the car, and still will open outward. (Ik I did not say this well, but tell me if you need more of an explanation. Still a really cool vehicle.)
Cool! How did you do the jet?
@VarisTheWingers
Yes, it appears he is.
It probably depends on the situation. However, if you are dumb, and given knowledge, it probably will not help you much, as you will lack wisdom to use it.
+1Ok, I got you to 5k. Do not beg for upvotes so much though, you did in a lot of your posts.
Cool!
Whatever it is it looks BIG!
Thanks, and it’s good to see you know you were wrong. You cannot get better without doing that first. I hope to see some nice planes soon, as this is basically what the sp site is for, isint it?
@Kennneth
Nice big plane. (Looks at tracking notifications from wish)
@5
I have not tried that. How does it work?
here
+1I will put the comment her, so you can see this. I did not originally say this.
“ @BombBoi1822 if you have overload installed (go to the mod menu in the vanilla game) use this as the input in inputController in the engine: Throttle=1?5:Throttle. This changes the thrust output of the engine to 5 times otherwise when the throttle is set to full, and the thrust remains normal when the setting is below 100%. For the best effect with the exhaust and stuff I recommend using the BFE150 engine when using an afterburner. This, however, does not widen the exhaust, but you should be fine, as the exhaust looks like an afterburner is on when it is.”
@LJh1
Let who? I thought this was your car?
Are you going to build a car off of this? It is a cool idea.
+1Cool!
@LJh1
+1Yes, please do!
@LJh1
+1Mercedes sounds cool.
@Graingy
Wow. Good for you. You must be such a great person!