@NEXOv2 make the rotator which attached on turret and fuselage floppy, then put a gyroscope on the turret, select the yaw power of the gyroscope, then you can turn the turret with it.
"ANA"on the right side of the fuselage is not in a right place. you can use multi-select to put it on the fuselage, or download this
机身右侧的"ANA"不在正确的位置。可以自行用multi-select把它贴在机身上
或者可以下载这个
@Gbhole It is hard to say...Almost every aircraft has its unique role.Among third-generation fighters,I like Su-27 series best. It looks very cool and has good maneuverability.(real airplane)
@Gbhole make the fuselage block circular and flat to make the hollow cockpit, then use hinge rotator and fuselage block to make the yoke, use hinge rotator or piston (i like to use piston on fighters)to make the throttle,use fuselage block to make the hud,then use flat and circular fuselage block to make the seat, you can also put a detacher and parachute to make ejection seat. then put the scaled cockpit on the seat,make sure that the front sight in the middle of the hud,if not,use fine tuner to put the cockpit in the right place.(you can also put something you want)
If you did these above ,then you can make the frame of the cockpit (use hollow fuselage or fuselage block),if you made ejection seat, you must use overload to set the whole seat(or the frame)"disable aircraft collisions"true.
It just my way to make it, hope it works. please don't mind my bad English.
@Strikefighter04 oh thanks
i wonder how did you upload your picture on cover
@HorizonOneMengXin 我的手机1500p就成PPT了
为什么你的设备2521p能正常运行
amazing
@NEXOv2 add another gyroscope on the turret and rotate it 90 degrees around z axis to deal with the acceleration
@NEXOv2 make the rotator which attached on turret and fuselage floppy, then put a gyroscope on the turret, select the yaw power of the gyroscope, then you can turn the turret with it.
@RUSKIETANKI
@Qingqiu 哦谢谢
能不能问一下，这么详细的三视图是在哪里找的？谢谢
@Zeezar2666 your main landing gears were too big
it will be a nice airplane
like this?
@Gbhole
非常好用
@jamesPLANESii 😂😂😂
@Misaka7856 过奖
"ANA"on the right side of the fuselage is not in a right place. you can use multi-select to put it on the fuselage, or download this
机身右侧的"ANA"不在正确的位置。可以自行用multi-select把它贴在机身上
或者可以下载这个
@TheSavageManZ 哦 谢谢建议
emmm 确实忘了换成unlisted @BubbleLukasie
@BubbleLukasie emmm
wow su-27 on my avatar
好活
@54188 可以可以
优秀
Thank you all for 5000 points!
@QingyuZhou your tank has better details
@Strucker thanks
@Biscool ok.I will upload another with livery
@Biscool thank you very much!
@PatrioticBrit maybe i can use the computer
@SouthTunnel2 I created a part of the fuselage and added it to sub assemblies to creat longer fuselage.
@SouthTunnel2 I have already finished.
https://www.simpleplanes.com/a/GC0kA3/Airbus-A350-900-XWB-read-discription
A350 finished
fixed wing loading
@klm747klm747 thanks for suggesting.But I can't put the parts into the hollow fuselage block.
@SouthTunnel2 Oh thanks
Uhh... I know how to make flexible wings NOW.
@Gbhole Yes😂
@Gbhole It is hard to say...Almost every aircraft has its unique role.Among third-generation fighters,I like Su-27 series best. It looks very cool and has good maneuverability.(real airplane)
@Gbhole Thank you very much.
@scp112 试试这个https://www.simpleplanes.com/a/1B5e2W/Ka-52fixed
我装个陀螺仪试试@scp112
@scp112 好的，我改改
有好的修改建议不@scp112
@MellowiRey thanks
You don't need any any fuselage ,just move the parts to the place you want ,then use attachment editor to connect them each other @Hellosss38
@Altmztrn thanks for your advice.
but i modified the inlet to 0 drag point it still turned...
thanks @Gbhole
you can make the COL and COM closer
@Gbhole
thanks @Blazeproductions
@Gbhole make the fuselage block circular and flat to make the hollow cockpit, then use hinge rotator and fuselage block to make the yoke, use hinge rotator or piston (i like to use piston on fighters)to make the throttle,use fuselage block to make the hud,then use flat and circular fuselage block to make the seat, you can also put a detacher and parachute to make ejection seat. then put the scaled cockpit on the seat,make sure that the front sight in the middle of the hud,if not,use fine tuner to put the cockpit in the right place.(you can also put something you want)
If you did these above ,then you can make the frame of the cockpit (use hollow fuselage or fuselage block),if you made ejection seat, you must use overload to set the whole seat(or the frame)"disable aircraft collisions"true.
It just my way to make it, hope it works. please don't mind my bad English.