For the main rotors you will need more power to the main engine. Or you could try increasing the weight - check the white bands on each blade - try doubling the weight.
For the rear rotor, just need to increase max rpm from 350 to something higher.
There are two joint rotators on the main prop... change from 10 degrees to say 15 or 20 this is for lift. And then one could copy one of the gyro’s and have 3 of them which will increase pitch/roll/yaw.
Making these changes may provide what seems to be more respinsive control, however I think it will be to ‘touchy’ when you are are flying close to the ground or landing on carriers etc.
This is really well done, good job! It looks AND flies great.
A couple of notes...; The wings have been scaled, it looks like the height mainly - when they are not scaled 1 to 1 eg. 1,1,1 to 0.2,.0.2,.0.2 then the control surfaces can look a but odd when in use. The only tip is really scale each axis the same and you won't get get this. It also means you will need less wing area.
Camera's and cockpits... Your cockpit is great as is the gun sight. I know its difficult to find one spot for the cockpit view that shows everything, and typically one needs to design the cockpit for this. In any case, what you have is super.
Again a minor tip... braking when landing. You can set the brake torque on the front wheels to zero and beef up the rear wheel torque. This will stop the plane from nose diving when braking after landing.
hehehe... so baadd (good)
Let me know how it flies
@shipster
Thanks again
@Awsomur
@Awsomur YAY some one like my drinking bird!!!!!!!
Will do... I totally hear you!
@furryfan101
My first post!
@dootdootbananabus
Just in front of main rotor - nudged downwards... @Aaron2107
Thanks :)
@corsair013
Easy to do... I had them plus rocket pods on an earlier version. Surley you can install them? @furryfan101
For the main rotors you will need more power to the main engine. Or you could try increasing the weight - check the white bands on each blade - try doubling the weight.
For the rear rotor, just need to increase max rpm from 350 to something higher.
@Aaron2107
There are two joint rotators on the main prop... change from 10 degrees to say 15 or 20 this is for lift. And then one could copy one of the gyro’s and have 3 of them which will increase pitch/roll/yaw.
Making these changes may provide what seems to be more respinsive control, however I think it will be to ‘touchy’ when you are are flying close to the ground or landing on carriers etc.
@Aaron2107
I think you are probably right
@DarthAbhinav
Point taken..... but... what happens when SimpleRockets2 comes out??? this will probably divide my, and I'm sure others, gaming time!!!
@DarthAbhinav
This is really well done, good job! It looks AND flies great.
A couple of notes...; The wings have been scaled, it looks like the height mainly - when they are not scaled 1 to 1 eg. 1,1,1 to 0.2,.0.2,.0.2 then the control surfaces can look a but odd when in use. The only tip is really scale each axis the same and you won't get get this. It also means you will need less wing area.
Camera's and cockpits... Your cockpit is great as is the gun sight. I know its difficult to find one spot for the cockpit view that shows everything, and typically one needs to design the cockpit for this. In any case, what you have is super.
Again a minor tip... braking when landing. You can set the brake torque on the front wheels to zero and beef up the rear wheel torque. This will stop the plane from nose diving when braking after landing.
Also, love the sunglasses! so cool!
@EpicPigster1
Yes, sent you the link already
@PyrusEnderhunter
With tracks
http://www.simpleplanes.com/a/21c5iK/Project-Destrier-A-103-Desert-Camo-v-C
@PyrusEnderhunter
Thanks buddy @TheLatentImage
Can, what's the comment? to slow? @Aaron2107
This is so cool!
Boom right back at cha
@JoddyFubuki788
@Unreliablewaffle365 See the link to a lower part count version... please let me know if it works or a lower lower part count is needed...
Check out my other one, this is just the tracks which people can use if they like. @AttestedArk
Lots of nudging parts! Each wheel is attached to one block along with a disk, then the blocks are joinded by a hinge... take a look
@Stormtrooper61
Thank you! @Awsomur
I am planning something....
@F4f879
Also have a look at this variation:
https://www.simpleplanes.com/a/fuOMt1/Naboo-N1-StarFighter-V6-RodWan#
@Sillynoose
Blue engines?
@Sillynoose
Thank you!
@RailfanEthan @F4f879 @Strikefighter04 @ThePrototype
Thanks right, thanks
@Notvarysimpleplanes
Thank you!
@BaconRoll @jamesPLANESii @Blue0Bull @PorkyClown3
Thank you @BlazeInfinity
Thank you @Solarisaircraft
Wow, nicely done.
Can... I can make some custom tracks fro you if you like... @PyrusEnderhunter
Thanks, I'm thinking of it.. I like doing things that interact with the game... hmm.. @samg32332
Good question... thinking about it... @Unreliablewaffle365
Thanks! Yes, I just had a look and also good! @BogdanX
Ahh yes, that was last on my todo list and forgot hehehe... @BogdanX
What are you working on? @temporaryaccount
Thanks @WalrusAircraft
Very slick!
Looks and functions really good.
How is it sexist? @goboygo1
Try this versions - use YAW to activate rocket.
http://www.simpleplanes.com/a/tjjU1p/Rocket-Car-v1-5
@JackTheBestBoss
The same you you fire machine guns
@Jeff12345
Use the thrusters, not fhe engines... @TheNCRranger
The tracks look great!!!
Nice!
@JackTheBestBoss Good point!
It will!!! @temporaryaccount
@Awsomur Thanks