@suskennypennykim if you have more points, a button with a magnifying glass icon should appear next to the "Download" button. That's the spotlight button
Get more points than the person you're spotlighting. Points are earned through upvotes, and 1 upvote = 15 points.
However for forum posts you only get 2 points per upvote
@SasuValentin1234 that's strange; the reversers are connected to the correct items, so they should work.
Anyway, it doesn't affect performance; you can stop as usual.
@Neruneten21 FYI, if you already deleted the original post, your repost won’t appear as a successor, so remember to ask the mods to make it a successor to this challenge when you post it
@LoneSpaceGaming I mean, it’s probably why the takeoff speed is higher on this aircraft, but it’s worth it as it allows the plane to sit close to the ground, allowing for easier disembarking at airports with fewer amenities.
Also, unlike the 737 series, the engines can be upgraded to bigger ones without having to be limited by ground clearance. (For the MAX, their engines were too large, so Boeing had to place them in an awkward position such that they were very far in front of the wings and very high up, increasing the risk of a stall. Then Boeing decided to use MCAS to fix it, and… well, you know what happened.)
@windshifter1 a tip for making good hollow windows without having to go through all this trouble:
1. take a hollow fuselage piece, and set thickness to 100%. (set the shape to “Curved” to get optimal results, and adjust the size of the window first)
2. Use the “Advanced Fill” (under the bit with “Vertical Fill”) to cut the edges off the fuselage piece.
3. After cutting, you should end up with a square piece that has a circular hole. Voila, a window has been made, and even better, you can connect these window pieces to each other, saving lots of work!
Depends; if you 3D print a glider specially made to generate a lot of lift, it may fly. However, from what I know the plastic used for 3D printing is rather heavy, so I doubt any 3D-printed planes can take off.
This reminds me of that one time in primary school when half of my class decided to roleplay as guinea pigs and become each other's siblings/parents
(idk i just remembered it)
Challenge released.
If you know anyone who makes good liveries, you can tag them on this post.
@SasuValentin1234
@CheeseINDUSTRIES
@DatRoadTrainGuy19
@LoneSpaceGaming
@Bryan5
@100
@Boeing727200F
@suskennypennykim if you have more points, a button with a magnifying glass icon should appear next to the "Download" button. That's the spotlight button
However for forum posts you only get 2 points per upvote
@SasuValentin1234 that's strange; the reversers are connected to the correct items, so they should work.
Anyway, it doesn't affect performance; you can stop as usual.
@Neruneten21 yes
+1@Neruneten21 FYI, if you already deleted the original post, your repost won’t appear as a successor, so remember to ask the mods to make it a successor to this challenge when you post it
+2@Neruneten21 I don’t see it in the successors list; can you link it here?
+1@LoneSpaceGaming I mean, it’s probably why the takeoff speed is higher on this aircraft, but it’s worth it as it allows the plane to sit close to the ground, allowing for easier disembarking at airports with fewer amenities.
Also, unlike the 737 series, the engines can be upgraded to bigger ones without having to be limited by ground clearance. (For the MAX, their engines were too large, so Boeing had to place them in an awkward position such that they were very far in front of the wings and very high up, increasing the risk of a stall. Then Boeing decided to use MCAS to fix it, and… well, you know what happened.)
@Boeing777x my aircraft line focuses on narrowbodies for now (the D-02 is a regional jet), although maybe in the future I could have a widebody
All tags requested from my teaser.
Aircraft released.
@LM0418 thanks! I really like the aircraft that I design, that's why I can put so much dedication into them
@Aviator01
@Aarav
And last but definitely not least:
@LM0418
@Imnotsusboi
@SPAircraftOfficial
@UnfairchildFH227
@Bryan5
@Neruneten21
@FedexGuy
@DeadlyDialga
@100
@DatRoadTrainGuy19
@CL125
@ToeTips
@CheeseINDUSTRIES
So yes, I'm making a challenge where you get to place liveries on this plane, and get a bunch of spotlights from me!
Releasing tomorrow.
Type "C" to be tagged on the challenge.
Just curious, what’s this software?
Also T
@SPAircraftOfficial but with 100 more passengers
+1@windshifter1 I'm... not too sure about that
@windshifter1 a tip for making good hollow windows without having to go through all this trouble:
+11. take a hollow fuselage piece, and set thickness to 100%. (set the shape to “Curved” to get optimal results, and adjust the size of the window first)
2. Use the “Advanced Fill” (under the bit with “Vertical Fill”) to cut the edges off the fuselage piece.
3. After cutting, you should end up with a square piece that has a circular hole. Voila, a window has been made, and even better, you can connect these window pieces to each other, saving lots of work!
@DatRoadTrainGuy19 all his recent comments look ok though
+1Depends; if you 3D print a glider specially made to generate a lot of lift, it may fly. However, from what I know the plastic used for 3D printing is rather heavy, so I doubt any 3D-printed planes can take off.
+2@Aarav @Neruneten21
This reminds me of that one time in primary school when half of my class decided to roleplay as guinea pigs and become each other's siblings/parents
+1(idk i just remembered it)
Biased bomber?
Also T
@RNManufactures the part count isn’t very high; some android devices can run planes with 500+ parts easily
@crazyplaness if the right side door opens all the way, it breaks off for unknown reasons, so I only allowed the door to open halfway
Why do I get an Access Denied message when I click on the google drive download link?
Also yes I discovered this old mod
@Neruneten21 quite fun, but I don’t plan to post any pictures here
@Neruneten21 leaving today
Hawaiian Pizza on the top of the page be like
+1@Bellcat the Canadian Armed Forces launches their counterattack
@ciegaming999 I already finished it, here it is
@CL125 isn’t it 30 for curated crafts? Idk
I think someone’s gonna bump their head sitting in this cockpit…
Aircraft is out.
@TheAirbusLover nice! I know a couple of schoolmates who came from China since young.
+1还有，我会讲华语，但是我的华语还算是基本的。。。
@MrSilverWolf ok 👍
+1@McChezborger to each their own, I suppose
@BeeEngineer not if it burns your house firs- jkjkjkjk
Tags requested from my teaser (except MrCOPTY).
+1@CheeseINDUSTRIES
And last but not least...
+1@MrCOPTY
@DatRoadTrainGuy19
@Type2volkswagen
@ThatRandomCouchPotato
@CR929thenewSPplayer
@Shimamurahougetsu
@FedexGuy