@HellFireKoder Essentially:
After you use the Multi-Select and Multi-Edit functions, it sometimes seems to get stuck at the Finish Multi-Edit thing. It gets stuck there and you can't move the selected pieces at all. Pressing the button will de-select the pieces but won't switch back to Multi-Select. After the bug occurs, the console shows a series of NullReferenceException messages colored in red. Also, it won't let you move any other piece at all.
The only temporary fix is to exit the designer and enter again.
And yes, it happens quite often after using the Multi-Edit function a few times.
Hands down, Android. It's pretty obvious why.
Just as most people said below, being able to use mods is a big, big plus to it. I don't care too much aboit its visuals as long as I can, say, download one of my aircraft that I made on PC and fine-tune some of its shapes when I can't access my laptop.
Now, I know I'm teasing, but I'm building an upgraded AMX 50B. If I weren't able to finish it on PC I would more than surely upload an unlisted version of it and try to continue the work on my phone.
On iOS, you surely can't do that.
@FennVectorCWA Well, respect is respect.
While I can't always thank everyone for their support, I try my best to do so. I consider it a sign of mutual respect.
@FennVectorCWA :DD
SJW... gotta love 'em for at least trying so hard :DD
Not to mention, again, the easily offended. "Oh I feel offended by this cause it's a swastika and Hitler is bad". Please stfu and, if you really feel offended by this, then why the heck are you here?
Was about to say that "history is history" but it seems you did it :)
@FennVectorCWA Like if I really care about it :D
Don't get me wrong. My grandparents suffered a lot due to the commies and yet I don't get offended by seeing the hammer and sickle at all.
Tbh, hurts me right into somewhere if there, indeed, is someone offended :)
Looks soooo much better without that massive tumor on its back.
Now, it's tail-heavy but I think you can counter this with Trim (haven't tried yet).
A bit lacking in the details department, though.
It can hardly even fly. It kinda looks good but flying with it is a nightmare due to overpitching and that gyroscope which doesn't allow you to fully roll.
It's also missing any sort of landing gear and is slightly tail-heavy.
@AdrianFlyingAce It's gonna be very hard though. Even so, guess I'll have to make an unlisted variant with many more details. (As a side note, all the fuselage inlets on the gun barrel are meant to be holes)
Btw, can you 3D print by using metal now?
Featured? But it's really not that good. This was my first try at making a heli.
I would've much rather had my Sherman or the recently built Ta 283 featured but oh well, a feature is a feature :)
@AnonyMoose @ThePrototype It wouldn't fly at all. It was simply a concept. Basically, the engines, being placed at the rear, do benefit from having little drag but, at the same time, heavily imbalance the aircraft. Their sheer weight causes the COM to exit the aircraft and be somewhere close to the main tail fin (basically the vert stab).
I recommend you disassemble this one and take a closer look at it. You'll have quite a big surprise :)
Insane turn rate on it. Also, the propeller seems to go through that smaller pad/whatever it's called.
Other than that, I did see it leans backwards a bit due to some weight imbalance.
Looks cool though. Would be nice to see a much improved version of it :)
The propeller seems to be hit by some MGs and blow up. It's got quite a big nose drop. Also, landing gear is linked to VTOL rather than the usual LandingGear input.
I suggest you disable collisions on all MGs, remove that jet engine inside it and, maybe, solve the balancing issue. Other than that, seems to be a good aircraft.
Has a slight autoroll issue and is imbalanced (nose pitching up due to too much weight on the rear). Still, fixed it by adding some dead weight on it (almost 3000 lbs but anyway...).
Have an upvote for the effort though. Good at bombing ships... and bridges :)
Decided to make a separate comment about how it flies.
Gotta say it's very stable. One thing that bothered me was the engine exhausts. Other than that, for a 55-part plane, it's quite good.
A looong time ago (when I was still bronze), I built one of these but, sadly, deleted it :(
It's so refreshing to see a properly-built Canuck. It's not the best-looking but neither the worst. I must give it a try and see how it flies.
@AdrianFlyingAce ?
@Toast You missed more than just this ;)
@Zandgard That was gonna be my next tank :/
Happy birthday! :)
@Zandgard Cette tourelle a été totalement un cauchemar :(
Mais je suis content que tu l'aime :)
Got you to 2k points! :)
@Waemoth I'm glad you like it :D
@AdrianFlyingAce Not exactly the 50B but it's still an AMX 50 :)
This is the closest I could get.
@FennVectorCWA Welp, you wanted me to tag you, so here you go :)
@NANOMAN C'est 'Très bon', pas 'Sehr gut', stp ;)
@BogdanX I wrote the description in the designer, that's why it didn't have any :)
@HellFireKoder This is how the console looks. It's flooded with the NullReferenceException error.
@HellFireKoder Essentially:
After you use the Multi-Select and Multi-Edit functions, it sometimes seems to get stuck at the Finish Multi-Edit thing. It gets stuck there and you can't move the selected pieces at all. Pressing the button will de-select the pieces but won't switch back to Multi-Select. After the bug occurs, the console shows a series of NullReferenceException messages colored in red. Also, it won't let you move any other piece at all.
The only temporary fix is to exit the designer and enter again.
And yes, it happens quite often after using the Multi-Edit function a few times.
@HellFireKoder
Hands down, Android. It's pretty obvious why.
Just as most people said below, being able to use mods is a big, big plus to it. I don't care too much aboit its visuals as long as I can, say, download one of my aircraft that I made on PC and fine-tune some of its shapes when I can't access my laptop.
Now, I know I'm teasing, but I'm building an upgraded AMX 50B. If I weren't able to finish it on PC I would more than surely upload an unlisted version of it and try to continue the work on my phone.
On iOS, you surely can't do that.
@FennVectorCWA Well, respect is respect.
While I can't always thank everyone for their support, I try my best to do so. I consider it a sign of mutual respect.
@FennVectorCWA Much obliged. Had to upvote some of your stuff just as you did to me :)
@FennVectorCWA Building something French atm. Totally not teasing :)
@FennVectorCWA ecks dee ecks dee
@FennVectorCWA :DD
SJW... gotta love 'em for at least trying so hard :DD
Not to mention, again, the easily offended. "Oh I feel offended by this cause it's a swastika and Hitler is bad". Please stfu and, if you really feel offended by this, then why the heck are you here?
Was about to say that "history is history" but it seems you did it :)
@FennVectorCWA In the screenshots it clearly shows it's white, not yellow.
@FennVectorCWA Like if I really care about it :D
Don't get me wrong. My grandparents suffered a lot due to the commies and yet I don't get offended by seeing the hammer and sickle at all.
Tbh, hurts me right into somewhere if there, indeed, is someone offended :)
@FennVectorCWA It's RED, WHITE and BLUE. Do you think that that's Romania? >.<
@Feanor Yep. Still, the shape of it (again, without that massive tumor) is quite cool :)
KVASSMAN))))))
Looks soooo much better without that massive tumor on its back.
Now, it's tail-heavy but I think you can counter this with Trim (haven't tried yet).
A bit lacking in the details department, though.
It can hardly even fly. It kinda looks good but flying with it is a nightmare due to overpitching and that gyroscope which doesn't allow you to fully roll.
It's also missing any sort of landing gear and is slightly tail-heavy.
\o/ Gestour back! \o/
@AdrianFlyingAce No one can do that lol.
@AdrianFlyingAce It's gonna be very hard though. Even so, guess I'll have to make an unlisted variant with many more details. (As a side note, all the fuselage inlets on the gun barrel are meant to be holes)
Btw, can you 3D print by using metal now?
Featured? But it's really not that good. This was my first try at making a heli.
I would've much rather had my Sherman or the recently built Ta 283 featured but oh well, a feature is a feature :)
@Shmexysmpilot "Yaw is inverted"
starts to whistle
Childhood ruined lol
If I hadn't deleted my old account, I'd be 1 year and 4 months old :)
This account is 8 months old currently.
@AnonyMoose @ThePrototype It wouldn't fly at all. It was simply a concept. Basically, the engines, being placed at the rear, do benefit from having little drag but, at the same time, heavily imbalance the aircraft. Their sheer weight causes the COM to exit the aircraft and be somewhere close to the main tail fin (basically the vert stab).
I recommend you disassemble this one and take a closer look at it. You'll have quite a big surprise :)
First gold to upvote \o/
Can't download it though. My poor laptop would become a sun on its own if I did that :D
Insane turn rate on it. Also, the propeller seems to go through that smaller pad/whatever it's called.
Other than that, I did see it leans backwards a bit due to some weight imbalance.
Looks cool though. Would be nice to see a much improved version of it :)
The propeller seems to be hit by some MGs and blow up. It's got quite a big nose drop. Also, landing gear is linked to VTOL rather than the usual LandingGear input.
I suggest you disable collisions on all MGs, remove that jet engine inside it and, maybe, solve the balancing issue. Other than that, seems to be a good aircraft.
Has a slight autoroll issue and is imbalanced (nose pitching up due to too much weight on the rear). Still, fixed it by adding some dead weight on it (almost 3000 lbs but anyway...).
Have an upvote for the effort though. Good at bombing ships... and bridges :)
@BogdanX The end result :)
I must thank you for helping me out sorting the problems with its dynamics and such. Big package coming to you ;)
@Pilotmario The first Sherman turret? That's extremely hard to do. The shapes on it are nearly impossible to reproduce in the game.
Decided to make a separate comment about how it flies.
Gotta say it's very stable. One thing that bothered me was the engine exhausts. Other than that, for a 55-part plane, it's quite good.
A looong time ago (when I was still bronze), I built one of these but, sadly, deleted it :(
It's so refreshing to see a properly-built Canuck. It's not the best-looking but neither the worst. I must give it a try and see how it flies.
Any chance we will find beavers onboard? Maybe some maple syrup?
@Cedy117 I'm glad you like it! Really worked hard on this one :)
@Pilotmario Quite good, gotta say.
@Rodrigo110 No it's not. Think of the people with iPhones (Android isn't much of a hazzle). They will struggle quite a bit with this.
@DisferGoatz :)
@ReischetzFokke The antenna on top of it is behind the 4.7 m height. It's not the tank itself.
@Pilotmario Fine. Also consider changing the paint. I used the olive drab as a reference.