Well from what I read on it's wikipedia it says 4 12.7s. And yes I know the warthunder model has the 2 20mms and 2 12.7s but I just decided to do whatbthe wiki says. @RAAFAce2
Well, I have an a-4 skyhawk in my files that I built a few months ago but now it is outdated and not finished. I don't think I will finish it however you're more then welcome to download the unlosted model. @R2d2hunter
You didn't change anything. You just colored it slightly differently and copied my description. I would suggest that you credit my build at the top of the desc. @matiyo
Haha when I saw the stall gif, it reminded me about a slightly scary experience that happened recently. I'm a student pilot as of right now, and my dad is a commercial pilot. So me and my dad decided to go up and do some flying in our Cessna 150. So we did some steep turn practice and a few stall recoveries. The c150 is an inherantly easy aircraft to recover from a stall. Simply apply down pressure on the yoke and full power. However, this time when we stalled, the left wing stalled first forcing us into a corkscrew. I know the proper thing to do is to apply opposite rudder and push forward on the yoke. However I literally just froze up and apparently kept turning the wrong direction furthermore tightening the corkscrew. My dad obviously knew how to get out of it and saved it easily. The part that scared me is that had I been cocky enough to practice stall recovery on my own, I would killed myself in that exact scenario. I froze up in the situation even when prior to the incident I had been aware of how to properly recover. But I digress, sorry for the lengthy comment but I just thought it was one of those eye openers for a young new student like me to not get cocky in the air. Also fantastic airplane. Anytime I feel like I'm half decent at building you just upload and make me forget about those thoughts 😆
Cool challenge but just a tip, make your max part count at least 500. Nobody can make a quality aircraft with only 100 parts. I guess it depends on your device's power and ability to run vehicles with a higher part count. However if you're able to run a fair amount of parts I'd say bump up the part limit.
Great aircraft. There are a few mis-spelled names in the cockpit however. You have "reviecer" and feathering "Light", as it's supposed to be feathering left.
Wow, I was just planning to write a farewell message and a thank you for creating a game and website that allows all of us aviation enthusiasts to come together and enjoy a community that's hard to find just anywhere, but then I forgot about april fools.
Ehh It's hard for me to rebuild an aircraft. Already losing motivation in my current project. Anymore there's so much work that has to go into an aircraft it's hard to finish something enough to upload. @Kangy
Well I was going to upload it a while ago but then I needed a code for the slats which I never asked for and so I just moved on, now the aircraft is sorta outdated and will remain in the scrapyards forever. This post is why I don't make teasers a whole lot anymore. I never know when project won't get finished. @Kangy
Thats not an american flag lmao. Looks more russian
Exactly lol @RAAFAce2
I'm not sure. No weapons were ever actually fitted on the ascender so I guess nobody will ever know. @RAAFAce2
Babe, babe, look, alisuchanka uploaded.
+3Well from what I read on it's wikipedia it says 4 12.7s. And yes I know the warthunder model has the 2 20mms and 2 12.7s but I just decided to do whatbthe wiki says. @RAAFAce2
Babe what’s wrong? You barely touched your f-15 Strike Eagle @androidking
+1Did you ever get to grading the challenge? I'm still curious who won? @mikoyanster
Thankyou, I quite like it too! @Croissant
Cool! @Alisuchanka
+1I love the livery personally. But I guess you could do a silver with black hood 🤷🏻♂️
+2yes @Alisuchanka
Thank you. @WinsWings
I'm not sure. But that's not a bad idea. @AdmiralWheatman
What in god's name is a knite
Oh crap don't forgor 💀@FairFireFlight
Hey doodoohead, when are you gonna post this hawt ass fitter?@FairFireFlight
Bro use smoothing
Neah that is a little too much work sadly. @R2d2hunter
Well, I have an a-4 skyhawk in my files that I built a few months ago but now it is outdated and not finished. I don't think I will finish it however you're more then welcome to download the unlosted model. @R2d2hunter
+2You didn't change anything. You just colored it slightly differently and copied my description. I would suggest that you credit my build at the top of the desc. @matiyo
+1Haha when I saw the stall gif, it reminded me about a slightly scary experience that happened recently. I'm a student pilot as of right now, and my dad is a commercial pilot. So me and my dad decided to go up and do some flying in our Cessna 150. So we did some steep turn practice and a few stall recoveries. The c150 is an inherantly easy aircraft to recover from a stall. Simply apply down pressure on the yoke and full power. However, this time when we stalled, the left wing stalled first forcing us into a corkscrew. I know the proper thing to do is to apply opposite rudder and push forward on the yoke. However I literally just froze up and apparently kept turning the wrong direction furthermore tightening the corkscrew. My dad obviously knew how to get out of it and saved it easily. The part that scared me is that had I been cocky enough to practice stall recovery on my own, I would killed myself in that exact scenario. I froze up in the situation even when prior to the incident I had been aware of how to properly recover. But I digress, sorry for the lengthy comment but I just thought it was one of those eye openers for a young new student like me to not get cocky in the air. Also fantastic airplane. Anytime I feel like I'm half decent at building you just upload and make me forget about those thoughts 😆
+10Poetic one might say. @Oxen
+2Maybe but I don't think so. @Deepdark
+1Thanks! @Sparky6004
+1Haha thank you! @MAHADI
+1Maybe. I'll see if I feel like doimg that. @MikuisNOTaboi
+2Thank you my fuhrur @Bog
+1Thank you. @WinsWings
+1Ah I see. Glad I could help. @WinsWings
+1Cool challenge but just a tip, make your max part count at least 500. Nobody can make a quality aircraft with only 100 parts. I guess it depends on your device's power and ability to run vehicles with a higher part count. However if you're able to run a fair amount of parts I'd say bump up the part limit.
+1I can relate brother@ollielebananiaCFSP
You always impress me with you quickness to respond to comments 😂😂😂 @ollielebananiaCFSP
Great aircraft. There are a few mis-spelled names in the cockpit however. You have "reviecer" and feathering "Light", as it's supposed to be feathering left.
+2Haha thanks bro 😆@Mustang51
Thanks brah @gigachad
Dang, I hadn't seen something this smooth since the last time I had a brain scan.
+4Wow, I was just planning to write a farewell message and a thank you for creating a game and website that allows all of us aviation enthusiasts to come together and enjoy a community that's hard to find just anywhere, but then I forgot about april fools.
Well done Andrew.
+2Is a bri'ish hott innit?
+2Hue hue hue oui
+3Very good job with this mig. Great addition to sp replicas.
+1Holly balls this is very nice
+4ALAHUAKBAR ALAHUAKBAR
+4Lol exactly @Kangy
+1Ehh It's hard for me to rebuild an aircraft. Already losing motivation in my current project. Anymore there's so much work that has to go into an aircraft it's hard to finish something enough to upload. @Kangy
Well I was going to upload it a while ago but then I needed a code for the slats which I never asked for and so I just moved on, now the aircraft is sorta outdated and will remain in the scrapyards forever. This post is why I don't make teasers a whole lot anymore. I never know when project won't get finished. @Kangy
Are you banned or something? Your account leads me to the home page :p@TheGreatToad
Thanks man! @realSavageMan
Thank you guys! @RAF1 @PapaKernels
Thank you! @DeezDucks
@DeezDucks Hey could you link this aircraft to this challenge?
+1