@William930718 Hey I've just updated the plane again and it should be fixed, and once again I'd like you to confirm if there's no big issue with it. Since after this I plan on updating the PW & GE versions
@William930718 what makes that possible is probably due to the plane's high thrust to weight ratio, I calibrated it close to the plane's thrust to weight when it's near empty so it's at its highest. It would be WAY higher if I had just put the A340's total thrust IRL on it if I didn't bother to calibrate the engine thrust to the plane's(game) weight.
As for the shaking at extremely high speeds... Since most Commercial airliners aren't designed for such speeds, they would most likely break up due to the structural loads on the airframe, so I'll leave it. The only way to prevent it is to keep your thrust low, only enough to maintain any speed you choose below maximum speed.
@William930718 yeah I'll update them later. But has there been no issue so far? I'm a bit worried that replacing the rotators with control bases might've had some unknown consequences especially the landing gear
@William930718 Sorry for the late reply but I've fixed it, and in an attempt to make it less laggy I replaced a bunch of rotators and pistons with Control bases. So I would like you tell me If there are any problems
@Ericbrent can't really fix that. That's just what happens when you have sprung landing gear. The issue does not relate to the tire size but the wheel's brake torque, Inertia and the fact that shocks and control bases can't hold something in place when under such conditions play a big factor.
@Emirates380 How did you land btw? I just did a pretty hard landing with it and the gear held up fine. Speaking of which... Which part of the landing gear exploded first? The nose gear? Or the main gears on the wings?
@Emirates380 Sorry But I don't think I can fulfill your request, especially under 22 days. I don't make liveries often(Very lazy) and most of the planes you mentioned are ones that I haven't made yet. I'm currently working on the md-80 so I can't work on anything else right now
@MrBANZAI I'm not sure, maybe in the future
@FeiGe3 I found it, I will fix it when able since I'm a bit busy.
@IDontHaveUsernamesLOL they still glow if you were wondering
@Brololxd 777-300er update, A350-1000 Rework
+4@justinshu0110 I'm planning on making them
@FeiGe3 they will, cuz it's a lot easier to manage and saves on part count and part cost
@FeiGe3 should be fixed now
@William930718 I guess you really are haha, and thanks for reporting the issues otherwise they would've gone unnoticed.
@William930718 It should be fixed now
@William930718 I've updated it, is it fixed now?
@William930718 I'll go try to fix it
@FeiGe3 really? Tell me in detail
@FedexGuy since the windows won't be much of a bother anymore I suppose I could in the future
@William930718 Hey I've just updated the plane again and it should be fixed, and once again I'd like you to confirm if there's no big issue with it. Since after this I plan on updating the PW & GE versions
@Jojoooo I plan on reworking it
+2@William930718 what makes that possible is probably due to the plane's high thrust to weight ratio, I calibrated it close to the plane's thrust to weight when it's near empty so it's at its highest. It would be WAY higher if I had just put the A340's total thrust IRL on it if I didn't bother to calibrate the engine thrust to the plane's(game) weight.
As for the shaking at extremely high speeds... Since most Commercial airliners aren't designed for such speeds, they would most likely break up due to the structural loads on the airframe, so I'll leave it. The only way to prevent it is to keep your thrust low, only enough to maintain any speed you choose below maximum speed.
@William930718 can you explain more about the shock absorber being soft?
@William930718 yeah I'll update them later. But has there been no issue so far? I'm a bit worried that replacing the rotators with control bases might've had some unknown consequences especially the landing gear
@William930718 Sorry for the late reply but I've fixed it, and in an attempt to make it less laggy I replaced a bunch of rotators and pistons with Control bases. So I would like you tell me If there are any problems
@MrBANZAI Nothing new for now, I'm busy updating existing planes. But I am aiming to make the a350 next
+2@SlowSeline82 to do them all you need to do is type; _ _ _ without spaces
@William930718 I'll take a look
@William930718 It's fine it shouldn't affect it's ability to fly that much, and I'm glad that the fix worked.
@William930718 could you download it again? I've updated the plane with my attempt to fix the problem, can you tell me if it's fixed?
@swat66463 I won't
@Max999 I plan on updating either the a300-600 or the 787-9. Next new plane might be an a350
@swat66463 I've tried but it seems like I can't add it. Cuz the prop sounds get drowned by the sound of the jets
@swat66463 Hmm... I'll try to simulate something like that for the a320, might come when I update it with new wingflex
@William930718 I'll make one eventually
@DreamAccount hmm I have an Idea on how to possibly fix this, I'll let you know when its ready.
+1@DreamAccount hmm, odd... It was fine for me when I was testing it, can you tell me what physics settings you're using(low-med-high)?
@swat66463 I don't know about that
@TheAirbusLover The real wings are just scaled down. The exact scales are; 0.1,0.1,0.1
The flight performance is likely due to my planes being lighter than they should be(like half their empty weight)
@ThatRandomCouchPotato Hinge rotators and funky trees
If you guys like the the new wing flex I might update my planes to include them, And have it on future planes.
@swat66463 hmm, I'll see what I can do
@Max999 currently updating the 767-300
+1@Ericbrent can't really fix that. That's just what happens when you have sprung landing gear. The issue does not relate to the tire size but the wheel's brake torque, Inertia and the fact that shocks and control bases can't hold something in place when under such conditions play a big factor.
+1@DatRoadTrainGuy19 in the future maybe
@SlowSeline82 can you upload it as unlisted and then tag me?
@SlowSeline82 Can you tell me what you did before you landed? Also what physics setting did you use?
It seems fine for me
@FeiGe3 probably won't. Kinda tired so...
+1@Ericbrent 0.o, I haven't made one tho-
@Emirates380 How did you land btw? I just did a pretty hard landing with it and the gear held up fine. Speaking of which... Which part of the landing gear exploded first? The nose gear? Or the main gears on the wings?
@Emirates380 whats your physics settings at? Since I'm playing on mobile I test my planes on physics set to low.
@Brololxd maybe in a few days, I'm done with the wings, engines, landing gear and doors. All It needs are the windows, lights and its physics.
+2@Emirates380 cam you tell me whats wrong?
@Emirates380 eventually
@Emirates380 Sorry But I don't think I can fulfill your request, especially under 22 days. I don't make liveries often(Very lazy) and most of the planes you mentioned are ones that I haven't made yet. I'm currently working on the md-80 so I can't work on anything else right now
+1@Emirates380 just made it myself