@DragoransEscarti Idk, probably nothing significant , since all I did was just made the fan diameter 1 inch wider than the cf6, thats it. other than that its the same(Rpm(lack of data) ,Blade count etc.)
@GuianLorenzo oh I see, its based off the a340-600(didn't read). No wonder it looks like a pencil. Oh and thanks for the tip for the a340 blueprint I might need it some day
@GuianLorenzo after looking at it, It seems we used similar Reference Image(s).Was it From Wikipedia ? Also, Is it just me or does the one you made look a bit... L O N G?
@MashMallow Change their mass from1 to something higher, not too high though if you're making sprung landing gear they might fall off. And if their connected to fuselage parts, add dead weight. If it messes with gear tilt, tweak their center of mass
@Juniovietnam sorry but I can't bud, I am playing on mobile so I have to be conservative on the part count. Its not fun when you have low fps after all.
@Decembermin I am very much aware, Ive adjusted my upload schedule from every 1 week to every 2 weeks as to give myself some free time to do other stuff, so expect the a310 in a month(2 weeks after the a300). I'm planning to publish my 757-200 in a few days, after that I'll move on to the A300-600 and then I'll do The A310
@BassemT90 Im planning to do the a310 but it's not what im making right now, I'll make the A310 after I'm done with my A300-600 rework(which i will start after i publish my next plane). As for the Tu154, I'll consider doing it
@DragoransEscarti Idk, probably nothing significant , since all I did was just made the fan diameter 1 inch wider than the cf6, thats it. other than that its the same(Rpm(lack of data) ,Blade count etc.)
Download links can be found here
@AviationCat007
@Decembermin
@Neowwwww yeah
Its finished and uploaded, Download links can be found Here
@OwO I'm too shy m8
Still need to work on the flaps and spoilers/speed brakes before moving on to the engines and landing gear
@Omgairplane It's going great, currently making the control surfaces, happy holidays btw
@Omgairplane I plan to
@James2007two you can make a Livery and post it. As for the cockpit, I plan on making one in the future
@Omgairplane The A330-900/800 are known as the A330Neo, So yes.
@GuianLorenzo Thank you I appreciate your kindness
@GuianLorenzo oh I see, its based off the a340-600(didn't read). No wonder it looks like a pencil. Oh and thanks for the tip for the a340 blueprint I might need it some day
@Omgairplane used too...
@GuianLorenzo after looking at it, It seems we used similar Reference Image(s).Was it From Wikipedia ? Also, Is it just me or does the one you made look a bit... L O N G?
@Powieieii WIP is short for; "Work In Progress/Process"
@Decembermin eventually,
+1@Juniovietnam Sure I'll try(after A310)
@SimplePlanesGG no sadly
@SimplePlanesGG no sadly
@ShootsPlanes yeah i plan on making ones for the A320 and 737 in the future, Though probably after I re-design my A320(currently not content with it)
Clip from This video
@Bellcat yeah I've seen some
@Omgairplane I'm gonna make the A300-600 next, and sadly I don't think I can add ram air turbines to the planes
@PyroFizz I don't mind it at all if anyone makes a livery with my planes
+2@Decembermin 24 hour public aircraft post limit
@Decembermin made a small error
@FlightWar728 I forgot to add the
craft instructions, It will be posted again tomorrow@MashMallow Change their mass from
1to something higher, not too high though if you're making sprung landing gear they might fall off. And if their connected to fuselage parts, adddead weight. If it messes with gear tilt, tweak theircenter of mass@MashMallow You put in the wrong code, here is the correct one:
1 - clamp01(2 * floor(abs(smooth(-GearDown, 0.2))))
Additionally "LandingGear :" messed with the code. Don't worry though, I too am an expert in Funky trees. But you can always ask the comunity for help
@MashMallow ok hold on
@Juniovietnam sorry but I can't bud, I am playing on mobile so I have to be conservative on the part count. Its not fun when you have low fps after all.
@MashMallow The codes work with all rotators, just set their input
maxto 1 andminto 0@Juniovietnam I'll do it eventually
@MashMallow
Landing Gear:
clamp01(smooth(-GearDown, 0.1625) +0.5)Door(closed):
1 - clamp01(2 * floor(abs(smooth(-GearDown, 0.2))))
Door(Open):
clamp01(2 * smooth(-GearDown, 0.1875) - 1)Edit it to your liking
@Bobyo all my recent planes have the floors and 2 cockpit seats, so that will also be included with the plane.
@Powieieii yes
+1@Omgairplane sorry but I can't bud. I play on mobile, so I cant implement a cockpit
+1@jamesPLANESii thanks for the advice, but I'm not really looking for upvotes. So long as people like the planes I make and have fun with them
@Augusta81 Basically
@FlightWar728 I started from scratch
+1@Decembermin I am very much aware, Ive adjusted my upload schedule from every 1 week to every 2 weeks as to give myself some free time to do other stuff, so expect the a310 in a month(2 weeks after the a300). I'm planning to publish my 757-200 in a few days, after that I'll move on to the A300-600 and then I'll do The A310
@Bellcat probably it's because it has no mass (0kg)
@FlightWar728 I'm planning on it
+1@FlightWar728 I'm planning on it
+1@Pragun007 Funky trees
@HorneyIbee feel free to do so
@BassemT90 Im planning to do the a310 but it's not what im making right now, I'll make the A310 after I'm done with my A300-600 rework(which i will start after i publish my next plane). As for the Tu154, I'll consider doing it
+1@Tang0five B757
+1@Neowwwww idk
@GuianLorenzo Thanks!