Damn, this chonker of a plane is crashing peoples games, and making people think i copy others. Btw i aint insulted @miyubiaircraft. Lol. 405k lbs of d e a t h. Glad yall enjoyed it. Even if it didn't compete with the other entrees. Lol
i can not thank @randomusername enough for the help, i'm sure i would have either taken much longer to fix it or just given up. lol thank you so much randomeusername : )
@V thanks for looking at it. I re downloaded to see if i did anything to cause that. Stick had a weird connection. That have been why the hitbox was wack. I don't know much about Vr and all that.
@AN2Felllla just overload and fine tuner. I tried to get a video but of course it doesn't do when i record lol. I'll try to get footage of it. I have 2 photos, but both are right after it happened
@jamesPLANESii my laptop is eh but it handled a 200 part plane i made and it handled a 2000 part one better than i expected, this plane currently is only at 61 parts
@asteroidbook345 , i have no idea what is happening. I have the wings set to id Wing-2 but the whole craft does the rolling thing. If you dont having anything else going on could you look at the aircraft yourself? I put a link to it in a comment
I just noticed this, when i turn on afterburner it will do it again even after climbing. But when i am high enough to stop it the engines just lose aome power.
I think that instead of 2 different action groups to turn the turret and rasie the guns. Maybe have them in one, but nake say the rising of the guns input trim, that would make it easier to use in moving targets
This has become one of my favorite planes ive made. Simply because of how ridiculous it is lol. Although its no where near as fun imo as the reaper i created acouple of weeks back. It still holds that special place in my heart.
I found that agood tatic for dogfighting is go higher. The extreamly high RPM of the propellers allows it to maintain a fast enough speed to maintain lift. And maneuver. Meaning you can just keep attacking your opponent and they can't do anything. Unless they also can do high altitude.
Unable to download it at the moment
I love the look of this one. The rear landing gear seems a too little close together whitch would cause it to tip when taxiing. When I am able to i will check it out
So i was able to download it. I like the look of the aircraft, and that you made the horizontal stabilizers act like canards. However it was very unstable, and had no trim. I think the rotator angle was to high and the plane was to slow or the movement speed was to fast. I did make some minor adjustments to make it fly better without running the look or the plane. I fihured out that the plane wasn't long enough for it's weight so i increased the lenth of the nose and redused the mass of the engines to .7 from 1. I also reshaped the horizontal stabilizers a bit to bring the COL back. Dont let my constructive criticism ruin your pride. Im glad you are proud of your plane. And you should be. If you wish I will upload a version with minor adjustments so you can see what i am talking about.
@randomusername oh. thank you
+2@UnderScore fixed some spelling for ya lol
+1@TheMegaMauster thank you so much for the spotlight! been a while sense i have posted so that gave me some confidence
+1.
So you made a knock off A10, im making ine but apparently my game doesn't like it lol
+1Damn, this chonker of a plane is crashing peoples games, and making people think i copy others. Btw i aint insulted @miyubiaircraft. Lol. 405k lbs of d e a t h. Glad yall enjoyed it. Even if it didn't compete with the other entrees. Lol
+1Thank you @edensk for the upvote. It gives me confidence about my creations. Glad tou were able to enjoy it!
+1thank you @randomusername for telling me how to make the wings more stable using overload :)
+1@randomusername thank you! It worked.
+1i can not thank @randomusername enough for the help, i'm sure i would have either taken much longer to fix it or just given up. lol thank you so much randomeusername : )
+1@randomusername ok i will try that
+1@V ah ok
@V thanks for looking at it. I re downloaded to see if i did anything to cause that. Stick had a weird connection. That have been why the hitbox was wack. I don't know much about Vr and all that.
https://www.simpleplanes.com/a/GEwlSL/FE-34-Thunderbird-V3 ( fixed version)
@UnderScore sorry, i was typing fast and have fat fingers
@AN2Felllla just overload and fine tuner. I tried to get a video but of course it doesn't do when i record lol. I'll try to get footage of it. I have 2 photos, but both are right after it happened
This is an old version. I will make some tweeks to it, but i don't know if i will upload it
@TheMegaMauster ok, thank you
@VerlorenUndGefunden I'm really glad you enjoy it!
@SodiumChloride Thank you!
@jamesPLANESii the wingspan is 65.4ft. The length is 73.7ft and the height is 15.4ft.
@jamesPLANESii i just had a chance to check and it is disabled it might be my computer, but i atill don't under stand why this plane
@jamesPLANESii my laptop is eh but it handled a 200 part plane i made and it handled a 2000 part one better than i expected, this plane currently is only at 61 parts
@Armyguy1534 i jave that mid but i have no idea how to use it
Have you messed with the overload mod yet?
@TheMachinist, ok
Turns out i had IAS on...... lol i aint even gonna delet this post its so funny
Id didn't shake at all before, even with its bery thin primary wings
@asteroidbook345 , i have no idea what is happening. I have the wings set to id Wing-2 but the whole craft does the rolling thing. If you dont having anything else going on could you look at the aircraft yourself? I put a link to it in a comment
Plane link https://www.simpleplanes.com/a/k7j0jG/Remake-Wendigo-WIP-Help
I do have the wongs set to Wing-2
The shaking is from the whole craft
Would it help if i upload the crflaft how it is to get a better idea?
I just noticed this, when i turn on afterburner it will do it again even after climbing. But when i am high enough to stop it the engines just lose aome power.
One wide b o i
@Gnome360, is that a funky trees thing? I wouldn't know how to do that
I think that instead of 2 different action groups to turn the turret and rasie the guns. Maybe have them in one, but nake say the rising of the guns input trim, that would make it easier to use in moving targets
@BoiBoicleetus69
not the site, im not near the computer rn
Unable to download it now, will do in a bit
This has become one of my favorite planes ive made. Simply because of how ridiculous it is lol. Although its no where near as fun imo as the reaper i created acouple of weeks back. It still holds that special place in my heart.
@Miyubiaircraft what do you mean?
I just noticed that the counter measures are not working, to fix it set them to flares, sorry about that
@BoiBoicleetus69 no prob my guy
Ok, thank you @EternalDarkness
This is a very interesting plane, now i have some inspiration. Great job!
@BoiBoicleetus69 thank you so much!
It is the definition of "im not stuck in here with you, you're stuck in here with me"
I found that agood tatic for dogfighting is go higher. The extreamly high RPM of the propellers allows it to maintain a fast enough speed to maintain lift. And maneuver. Meaning you can just keep attacking your opponent and they can't do anything. Unless they also can do high altitude.
This plane was a lot of fun to make. Is it a little extreme with somethings? yes it is. This was more of a goofy sorta build. I hope you all enjoy!
@PointlessWhyshouldi np my guy
Unable to download it at the moment
I love the look of this one. The rear landing gear seems a too little close together whitch would cause it to tip when taxiing. When I am able to i will check it out
So i was able to download it. I like the look of the aircraft, and that you made the horizontal stabilizers act like canards. However it was very unstable, and had no trim. I think the rotator angle was to high and the plane was to slow or the movement speed was to fast. I did make some minor adjustments to make it fly better without running the look or the plane. I fihured out that the plane wasn't long enough for it's weight so i increased the lenth of the nose and redused the mass of the engines to .7 from 1. I also reshaped the horizontal stabilizers a bit to bring the COL back. Dont let my constructive criticism ruin your pride. Im glad you are proud of your plane. And you should be. If you wish I will upload a version with minor adjustments so you can see what i am talking about.
It certainly looks cool i would download it but i am unable to do so at the moment. Hope you stick to postibg stuff on here!
@Frtik77 nvm got it
@XxMegamonsterxX im having trouble getting it to show up after i type it into the discription. Im trying to do it on my most recent plane.