PLEASE NOTE: The diagonal section below the foward turret has a mistake, the upper greeble hollow fuselage is offset from the craft. TOO FIX: simply copy the X and Z position values of the panel below it and paste them into the upper panel, then remove the panel on the other side of the craft then mirror the fixed piece.
@Mustang51 keep in mind this is meant to be used in multiplayer. As such, part count must be low and the runways must be kept clear, im sorry if the lack of features disapointed you.
Machine guns become auto cannons at the 20 mm bore diameter mark. The largest auto cannon i know of are the 203mm cannons on the USS Des Moines, at around 10 rpm.
I would change a lot of things on this build. These proposed changes include:
The "skirt" around the front and back of the balloon can be reduced down to a single part, this being a large hollow fuselage fliped vertically
The tail should be a little longer, and it could definitely use some better blending into the rest of the balloon
Put a light glossy gray coat of paint on it, its visually very drab and boring at the moment.
And finally we get to the gondolas, these need a lot of work done to them.
Both upper gondolas need to be a little closer to the rounder lower gondolas.
And the rear gondolas need to be about half their current size.
If you wish to do a collaboration with me on this project, you can reply with a link or URL to an unlisted version of this craft.
@Piolt1
@TheFantasticTyphoon
@Aeromen
@Brendorkus
Ernie prepares to commit a McHatecrime.
Also McTag
Go build a Peel Viking, Peel's very smol sport boi.
Pls I need it.
@jamesPLANESii pics or it didnt happen.
@robloxweponco its already released.
PLEASE NOTE: The diagonal section below the foward turret has a mistake, the upper greeble hollow fuselage is offset from the craft. TOO FIX: simply copy the X and Z position values of the panel below it and paste them into the upper panel, then remove the panel on the other side of the craft then mirror the fixed piece.
@Brendorkus
@Ultra0
@TheFantasticTyphoon
Given the goliath guided mine exists, I think it should be called the Gargant or something like that.
Kek
@BeryllCorp look at the drag view and notice what there isn't much of.
@Mustang51 keep in mind this is meant to be used in multiplayer. As such, part count must be low and the runways must be kept clear, im sorry if the lack of features disapointed you.
@Nuclearbomber36 it is 360 ft long so...
@SimpleFlow i can't click ANY links here anymore because all of them in the last 3 days have lead to me being rickrolled in some way...
@SimpleFlow NOOOOOOOOOOOO!!!!!!!!!!!
NOT AGAIN
Is anyone gonna tell him...
@Aeromen This will work.
Thanks for the help.
@Aeromen problem: i couldnt find the aircaft file. I play the game through steam if that helps at all.
@Aeromen thank you good sir!
@Type2volkswagen its already out my guy.
Hmm, a 7
Damn I just tried this in 1.7.1, still the same issues.
Probably going to have to go back to at least 1.8, because you used to be able to download stuff off the way back machine.
@goboygo1
@Subnerdica
@HarrisCraft
@random40
@CrashFighter05
@Mercyaircraftcorporation
@QuingyuZhou
@emanuelga
@edensk
@JamesBleriot hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Might have seen it in a video a while back now that I think about it.
YES
@CrashFighter05 correction
It takes out a small percent of the ozone layer every second when its at full throttle.
@Strikefighter04 hmmm
@MrPorg173
@Strikefighter04
@Strikefighter04
@MrPorg137
@Freerider2142
@Strikefighter04 you know what, we take those.
Literally runner away from your problems lol.
@Freerider2142
@Mobilepilot
@AircraftoftheRedStar
@ACEPILOT109
@Tums
Why not use extremly long life projectiles as coal in a steam locomotive?
@CruzerBlade i already made a cannon engine :D
Machine guns become auto cannons at the 20 mm bore diameter mark. The largest auto cannon i know of are the 203mm cannons on the USS Des Moines, at around 10 rpm.
How about 3?
TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
@Strikefighter04
That thing still needs:
A name
A cockpit and the relevant working dials
D E T A I L S
It might take a few days.
If only I had known about this...
Very good.
I would change a lot of things on this build. These proposed changes include:
The "skirt" around the front and back of the balloon can be reduced down to a single part, this being a large hollow fuselage fliped vertically
The tail should be a little longer, and it could definitely use some better blending into the rest of the balloon
Put a light glossy gray coat of paint on it, its visually very drab and boring at the moment.
And finally we get to the gondolas, these need a lot of work done to them.
Both upper gondolas need to be a little closer to the rounder lower gondolas.
And the rear gondolas need to be about half their current size.
If you wish to do a collaboration with me on this project, you can reply with a link or URL to an unlisted version of this craft.
@Desertstorm88 maybe try making your feedback more constructive.
@SteveJobs1955 get out of here sbeve you werent invited
C A M E L B A C K L O C O M O T I V E
D R O N E