In China, the weight and the oil volume is generally expressed using metric units, but the flight is using imperial units (miles per hour, etc.) and this one unit option is expected to be reflected in the 1.13 update.I also want to be able to add Chinese settings to my use.What a beautiful game,thank you.
I would be grateful if I had the privilege of participating in the Chinese translation of a simpleplanes.
[My mail:woaihuafeiji@qq.com]
I'm using Bing translator.Therefore, there may be inaccuracies in the formulation.
I don't think it will replace the SP, although it can save a lot of time on the construction of fuselages or wings with complex cross-sections, as well as the livery editor, but it also has quite a few disadvantages, the most obvious is the high performance requirements, followed by the adaptation of the mobile terminal, and there is no SP openness, etc. I think the FO is very promising, and the SP2 may be slightly better if released (I hope the SP2 still supports the current SP's aircraft model) (I suddenly remembered the 12.200 update, hoping to add another knob to adjust the larger value)
@linxiaofeng2339 clamp01(SPD>IAS3.6)clamp01(Activate6)-rate(TAS)clamp01(abs(IAS3.6-SPD)<5)
This code is newly written by me to maintain a speed error below 2km/h on TwinProp
The input of the spoiler can be changed to IAS*3.6>(SPD+5)
I'm making a new version of autopilot, but I didn't finish the VY control
https://www.simpleplanes.com/a/4I11JL/AutoPilot-TestTwin-Prop
It can maintain the speed, heading, altitude of the input, this is just a rudimentary version and I am still updating it
你可以让这个婴儿车可以浮起来吗？
+9In China, the weight and the oil volume is generally expressed using metric units, but the flight is using imperial units (miles per hour, etc.) and this one unit option is expected to be reflected in the 1.13 update.I also want to be able to add Chinese settings to my use.What a beautiful game,thank you.
+4I would be grateful if I had the privilege of participating in the Chinese translation of a simpleplanes.
[My mail:woaihuafeiji@qq.com]
I'm using Bing translator.Therefore, there may be inaccuracies in the formulation.
至少在中国（盗版泛滥）这一设想很难真正的、光明正大的实现
+3再说你见过哪个中国学校上课不做题/写卷子
这个驾驶舱用了多少零件啊，我感觉我的电脑可能扛不住我做完内饰的919了，哈哈哈哈
+2我第一次做驾驶舱，请问您寒假有时间解答一些问题吗（doge
@BigAeroplane 英语不好用一段时间就熟悉了，而且b站上也有很多教程，还有我想提醒你sp不用实名（手动狗头
+2↑这也是中国人↑
+2在sp里造一架精致的飞机很难，如果你有大把的时间可以做，但是如果时间很少的话就不建议造的过于细致了，并且移动端的操作要远复杂于电脑，如果你非常愿意造飞机，就坚持下去，每个sp社区里的人都会支持创作者的。
flying egg！
+2同志，1714的c919是基于我的c919机头（乐
+2这超音速公务机很帅啊
+2人才
+2有200个零件在尾翼上！！！
+2@CR929thenewSPplayer 但是可能要好几个月，应该很考验你的耐心哈哈哈哈哈
+2@Canadaball 哈哈这个肯定用了一张看不清图片
+2如果能让按钮自由移动或隐藏就更好了
+2这么多零件好卡，我还是去玩X-Plane吧。哈哈
+2@FoxtrotCharlieCharlieX 但是这不河狸（合理，中文谐音（梗）），那jurdoo的人吃啥（活不了啦）
+2卡爆了
+2292parts，why not 262parts
+1@XiaoNaiTang 检查版本，比如说切割是在1.11中加入的，1.10及以前版本就没有，如果你在网上找不到破解版可以到倾城勿泪的qq群里下载562377132
+1Is this the best content on the homepage now, not as good as before
+1@schinaplayer 你去看那个帖子下的评论（乐
+1@YUKIKAZESAMANANODA 只有机头是我造的，大部分都是1714制作的
+1Only the nose was made by me, most of it was made in 1714
@realSavageMan 就是发教程视频得拆这飞机
+1神爹强无敌
+1How about making an airport as a map with Minecraft
+1expensive！
+1@molakesi 啥文采背诗呢
+1呃呃呃除了致命方窗之外很完美！！！
+1@Suubk27 哇事suubk欸！
+1一根钢管咋就28upvotes了
+1@Sakorsky 它哪里奇怪了呀
+1@ningjuBiliBili 但是作为国航他早晚要买
+1[doge]
我觉得你需要更好的三视图，哈哈
+1I love Minecraft
+1好独特的飞机
这漂亮，但是配平和升降舵面反了
+1@cx332 应该就是一个高像素位图，unity貌似不支持有渐变的矢量图，并且不显示影子
@Deandash 臭地图（喜
@NormalCv580enjoyer humorous!
But in the future, I will streamline some unnecessary parts
If you want to keep track of this post, please follow me or reply below and I'll @ you next time
i'll
@Aifleron simplecooking
I don't think it will replace the SP, although it can save a lot of time on the construction of fuselages or wings with complex cross-sections, as well as the livery editor, but it also has quite a few disadvantages, the most obvious is the high performance requirements, followed by the adaptation of the mobile terminal, and there is no SP openness, etc. I think the FO is very promising, and the SP2 may be slightly better if released (I hope the SP2 still supports the current SP's aircraft model) (I suddenly remembered the 12.200 update, hoping to add another knob to adjust the larger value)
@schinaplayer 不算内饰2000个一下，做完内饰就不一定多少了
@RepublicOfCursedPlanes I also hope that the C919, which I have been rubbing for a year, will be on the homepage，hha
@linxiaofeng2339 clamp01(SPD>IAS3.6)clamp01(Activate6)-rate(TAS)clamp01(abs(IAS3.6-SPD)<5)
This code is newly written by me to maintain a speed error below 2km/h on TwinProp
The input of the spoiler can be changed to IAS*3.6>(SPD+5)
I'm making a new version of autopilot, but I didn't finish the VY control
大佬能不能把外形造的荔枝一点
This is made according to my ideas
This sentence is because of me,haha~
https://www.simpleplanes.com/a/4I11JL/AutoPilot-TestTwin-Prop
It can maintain the speed, heading, altitude of the input, this is just a rudimentary version and I am still updating it
@ComradeLaomao activate1
好东西，零件不多还很细节