Just posted the last version of my plane, a litle bit slower acceleration (very little) and a little bit faster total time due a better top speed.Difference is less tha 0.1 seconds, I think, but it won 100% of tests against the previous one on both sides, so... it's better.
@Stingray AndrewGarrison is working hard on SimpleRokets 2 (and I cant wait for buy it), so probably he has few times for simpleplanes. I hope after the relase of SR2 (I think this summer) SP return under Andrew attention and love.
@Stingray A lot of models (all the ones done on windosw for sure) have collision disabled. It's enough for both. You must hope that there is no "ios vs ios". :(
I want to tanks all the guys (or maybe some girls, who know?) that enter the contest untill now. There is plenty time for enter (until august 12th 2018, near two months), so tell to your friend of this contest. Upvote it for made it more visible, put it in the jet stream for show it to your follower. More entered plane, more glory for the final winner!
Everything is working as requested for the challenge. Valid entry.
The plane is very nice, you can be proud of this. :) And I hope this experience can be usefull for you in the next creation projects. I cant wait for the final judgement, a lot of beautifull planes are in the contest.
OK, I can save your life. :P I fixed your plane, but for be fair, you must do a fixed version by yourself (or it's unfair for others). The fix is relatively simple.
1) Load my escape pod module, and remove cockpit from it (it's in the tiny and pointed metal part in front of the glass)
2) Save my pod as sub assembly
3) Load your plane, and move the cockpit away from the pod (like on the tail, IE)
4) delete all the front piece of your plane
5) Attach my module from sub assembly to your plane
6) Move cockpit again in the same position
7 made the pointy nose of your plane again (two pieces)
I did it in about 5 minutes, so you are not lost forever. Do it and post it again.
@MikoJake when you have this problem, "undo" untill you roll back a working version. And, of course, when you have a working version, save it with a number. You will delete all them only at the end of the work. :) IDK if you can save your version now, but these are important steps working on complex built with moving or launcing parts.
@DerpyCookie17 In the original parts this is not, you probably resized or changed some parts welding all togeter. It one of the challenge mantain the pod working exactly as given
@DerpyCookie17 You have plenty time, do not worry. Test your plane at your better, maybe tomorrow, and maybe you will see something to improve. :D it's not a race for the first relase. :)
Valid entry. I hope I will not made mistakes chosing the plane on august judgement. Can you simply rename this plane (do not need to reupload) as "final"? Thanks
I think the present evolution of my entry is the final point of this design. If I want to improve I can't refine it, but I must return to the drawing board.
The only interesting thing is that my time appear already competitive. ;-)
@beastpilot124 @Tully2001 It's fine, I tested it.
Mine 17 and i pass the 1st ring before you. You must work both on acceleration and speed
@Tully2001 great, i cant test it now, but tis race will be a great show
@Tully2001 I cant wait to see your creation.
@Tully2001 I'm pretty sure that you will be a very hard "enemy" :) What your time? (at 24 hours from start is fair enough declare it)
24 hours left. I want to declare how my plane perform:
17 second from the 1st ring, fast acceleration to reach it, 2300+ MPH with a very solid success rate (abot 99% success, but 1% catastrophic failure)
@Axartar Tested and gived the result as comment of the plane.
Passed from validator as requested, design valid for unlimited class. :)
....pst.... whisper when I pass the final ring, you are 4.6 miles back my tail. Try to improve. ;)
@Dandy95 I think not enough :P
(Lunamobile in italian version, IDK how is called in original serie. Maybe "moonmobile")
@RailfanEthan Inspired (but NOT replica) from the S.H.A.D.O. Lunamobile, from "U.F.O.", a '70 TV Series from Gerry and Sylvia Anderson.
Less than 50 hours, I cant wait for the start
Just posted the last version of my plane, a litle bit slower acceleration (very little) and a little bit faster total time due a better top speed.Difference is less tha 0.1 seconds, I think, but it won 100% of tests against the previous one on both sides, so... it's better.
@jamesPLANESii Thanks it works perfectly
@DerpyCookie17 It's a simple VTOL engine with a x30 power. Nothing special.
@DerpyCookie17 https://www.simpleplanes.com/a/bEErB7/1000-mph-yaeger-engine-for-DerpyCookie17
Nothing in real world. I will made a gold, silver and bronza prize for the winners.
@DerpyCookie17 The complete review and test (and premiation) will be on august, after the 12th.
Last days for submit a competitive plane. On sunday morning I will declare my time. :P
I'm working on a VTOL version
@Botfinder But with a little bit of saab draken ;)
@Stingray Devs must pay the bills too. :)
@RyneKuczy Real plane F-111 did :D It inspired me in few concepts.
@Botfinder LOL, thanks, I completely missed it! :D
@Awsomur Thanks mate, I will try it now. :)
@Stingray AndrewGarrison is working hard on SimpleRokets 2 (and I cant wait for buy it), so probably he has few times for simpleplanes. I hope after the relase of SR2 (I think this summer) SP return under Andrew attention and love.
@Stingray A lot of models (all the ones done on windosw for sure) have collision disabled. It's enough for both. You must hope that there is no "ios vs ios". :(
@Giggitymerf Software limit is 760 mph. This is a sort of fake sound barrier, and is not tied to altitude.
Shaved some other cents of second. :) I think i will be competitive at high level.
After i fired the P08, The second dream left is firing a C96. :D
I want to tanks all the guys (or maybe some girls, who know?) that enter the contest untill now. There is plenty time for enter (until august 12th 2018, near two months), so tell to your friend of this contest. Upvote it for made it more visible, put it in the jet stream for show it to your follower. More entered plane, more glory for the final winner!
Everything is working as requested for the challenge. Valid entry.
The plane is very nice, you can be proud of this. :) And I hope this experience can be usefull for you in the next creation projects. I cant wait for the final judgement, a lot of beautifull planes are in the contest.
The plane flies, and the pod work perfectly. A sleek and nice plane with some resemble on B-70. Valid entry.
There is a bomb unwelded somewere, that fall at take off. Thanks for your time doing this entry. :D
@MikoJake You are welcome, my friend.
OK, I can save your life. :P I fixed your plane, but for be fair, you must do a fixed version by yourself (or it's unfair for others). The fix is relatively simple.
1) Load my escape pod module, and remove cockpit from it (it's in the tiny and pointed metal part in front of the glass)
2) Save my pod as sub assembly
3) Load your plane, and move the cockpit away from the pod (like on the tail, IE)
4) delete all the front piece of your plane
5) Attach my module from sub assembly to your plane
6) Move cockpit again in the same position
7 made the pointy nose of your plane again (two pieces)
I did it in about 5 minutes, so you are not lost forever. Do it and post it again.
The plane is beautifull, but the pod does not work. Invalid entry, but belive me, I like this work.
@MikoJake Don't surrender. Use te experience to work on a better version from an empty draw table.
The pod work perfectly and the plane flies and bomb (bomb the whole world, if the pilot want xD)
Valid entry
@DerpyCookie17 There are lot builder better than me :) But thanks.
Done.
@MikoJake when you have this problem, "undo" untill you roll back a working version. And, of course, when you have a working version, save it with a number. You will delete all them only at the end of the work. :) IDK if you can save your version now, but these are important steps working on complex built with moving or launcing parts.
@DerpyCookie17 In the original parts this is not, you probably resized or changed some parts welding all togeter. It one of the challenge mantain the pod working exactly as given
@DerpyCookie17 Do you have a creation for announce the challenge, to download and be successor?
@DerpyCookie17 You have plenty time, do not worry. Test your plane at your better, maybe tomorrow, and maybe you will see something to improve. :D it's not a race for the first relase. :)
@DerpyCookie17 Is not late, challenge will be open until August 12th
Valid entry. I hope I will not made mistakes chosing the plane on august judgement. Can you simply rename this plane (do not need to reupload) as "final"? Thanks
Inspired by F-22 but without vectoring?
BTW good job, upvoted. I like it.
@Nerfenthusiast https://www.youtube.com/c/taprackbang
Is not a videogame channel, it is a survival/outdoor/zombie channel italian language.
I will test this asap
I think the present evolution of my entry is the final point of this design. If I want to improve I can't refine it, but I must return to the drawing board.
The only interesting thing is that my time appear already competitive. ;-)