@BOSSentinel Well, just look, if I'm not mistaken, the Panzerwaffe wanted a new tank for themselves, for example, the Pz.Kpfv 12, and so they announced a competition where, for example, there would be 3 prototypes (VK) of a tank from different companies one of them won and becomes Pz.kpfv 12 that is I can't name the tank right away Pz.kpfv and have to name VK
@Supersoli8 If I understand correctly, you have problems with installing the gun? If so, put it on the front part of the turret and then enter the height and width from the place where the gun should stand (cords from the rotator),Next, remove the gun connection to the turret and hook it to the front side of the rotator.
Front plate thickness: 135mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 175mm
Turret front (up) armor: 160mm at 30 degrees
Turret front (down) armor: 130mm at -60 degrees
Turret middle (front) armor: 100mm
Turret middle (rear) cheek armor: 75mm
Turret rear armor: 50mm
Front plate thickness: 150mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle + 50mm plate (PS.SiCrMo65)
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 200mm
Turret front (up) armor: 190mm at 30 degrees
Turret front (down) armor: 160mm at -60 degrees
Turret middle (front) armor: 110mm
Turret middle (rear) cheek armor: 80mm
Turret rear armor: 50mm
@GeneralCorpInc oke
+1@Supersoli8 thk
@BOSSentinel Well, just look, if I'm not mistaken, the Panzerwaffe wanted a new tank for themselves, for example, the Pz.Kpfv 12, and so they announced a competition where, for example, there would be 3 prototypes (VK) of a tank from different companies one of them won and becomes Pz.kpfv 12 that is I can't name the tank right away Pz.kpfv and have to name VK
+1[SGW-RP] tag
@Mitterbin
[SGW-RP] tag
@GeneralCorpInc
@Deeganwithabazooka
@BOSSentinel
Why didn't you mention me?
+1@ReichRichDeutsch And I wasn't involved in the deal, right?
+1@Mitterbin I have a huge question, why do you need only one FAT?
+1Well, I don't think I'm much better at tanks hull's.
Great
+1Materials: PS.SiCrMo45 MK-B or MK-C
Front plate thickness: 50mm
Middle front plate thickness: 45mm
Lower front plate thickness: 40mm
Side thickness: 35mm
Rear thickness: 35mm
Hull roof armor: 35mm
Hull floor armor: 35mm
@Mitterbin Okay $60,000
+1If for some reason you want to know the composition of steel, go here
@SPWithLizzie
@keiyronelleavgeek566
@RB107
@LunarEclipseSP
@DeeganWithABazooka
@RepublicofWrightIsles
@Schmoovebrain
@MIGFOXHOUND31BSM26
@GeneralCorpInc
@BOSSentinel
@Supersoli8
@NotRob119
@ReichRichDeutschYour
@AverageB1BLancerSimp
@Aeromax
@Mitterbin how so fast?
+1@Mitterbin
@Voytek
@BigHeadEngineering
@Mitterbin ???????
+1currently have YES units available for sale.
Price: $0.0525~0.06 million.
Package: comes with 4 months maintenanc
@GeneralCorpInc yey
+1@GeneralCorpInc And I have a question, can I join as a German company (something like between a AG Krupp and a Henschel)?
+1@GeneralCorpInc Well, basically, considering that I'm slowly running out of ideas about KE-RP I think it wouldn't be a bad idea to join this RP
+1@Supersoli8 If I understand correctly, you have problems with installing the gun? If so, put it on the front part of the turret and then enter the height and width from the place where the gun should stand (cords from the rotator),Next, remove the gun connection to the turret and hook it to the front side of the rotator.
Т
Do you still need help?
@SPWithLizzie
@keiyronelleavgeek566
@RB107
@LunarEclipseSP
@DeeganWithABazooka
@RepublicofWrightIsles
@Schmoovebrain
@MIGFOXHOUND31BSM26
@GeneralCorpInc
@BOSSentinel
@Supersoli8
@NotRob119
@ReichRichDeutschYour
@AverageB1BLancerSimp
@Aeromax
@Mitterbin
+1@Voytek
@BigHeadEngineering
If for some reason you want to know the composition of steel, go here
currently have 18,000 units available for sale.
Price: $1,200,000 ~ 1,800,000
Package: comes with 2 months maintenanc
Materials:
Kerrex.A10 - 12.5%
PS.SiCrMo65 - 31.25%
PS.ST52M - 31.25%
PS.SiCrMo65 - 25%
Front plate thickness: 135mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 175mm
Turret front (up) armor: 160mm at 30 degrees
Turret front (down) armor: 130mm at -60 degrees
Turret middle (front) armor: 100mm
Turret middle (rear) cheek armor: 75mm
Turret rear armor: 50mm
@voytek .50 cal? Oh... now i understand
@Mitterbin
+1@Bugati87
@Voytek
@BOSSentinel
@AverageB1BLancerSimp
What calibers do you think would be best suited for H-IFV?
If for some reason you want to know the composition of steel, go here
@SPWithLizzie
@keiyronelleavgeek566
@RB107
@LunarEclipseSP
@DeeganWithABazooka
@RepublicofWrightIsles
@Schmoovebrain
@MIGFOXHOUND31BSM26
@GeneralCorpInc
@BOSSentinel
@Supersoli8
@NotRob119
@ReichRichDeutschYour
@AverageB1BLancerSimp
@Aeromax
currently have 35,000 units available for sale.
Price: $1,550,000 ~ 2,100,000
Package: comes with 2 months maintenanc
@Mitterbin
+1@Voytek
@BigHeadEngineering
I haven't had time to finish the description yet.
Hey
Materials:
Kerrex.A10 - 12.5%
PS.SiCrMo65 - 31.25%
PS.ST52M - 31.25%
PS.SiCrMo65 - 25%
Front plate thickness: 150mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle + 50mm plate (PS.SiCrMo65)
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 200mm
Turret front (up) armor: 190mm at 30 degrees
Turret front (down) armor: 160mm at -60 degrees
Turret middle (front) armor: 110mm
Turret middle (rear) cheek armor: 80mm
Turret rear armor: 50mm