@Tully2001 Sure, sounds good. I'm sure that will spend some time on the front page as well, so I'll wait until it's off the front page before featuring.
@tuco @IStoleYourMeme That's correct, I'm going through the plats that never got featured and letting them pick a design. Also, this was the first use of the glass technique, you can see that it's from 7 months ago.
Did you get the game from Amazon? They don't allow purchasing physical goods through an app, so we had to disable that feature for the version on the Amazon app store.
What device are you playing on and what app store did you get the game from? Also, please provide a little more detail as to what exactly is resetting.
@AudioDud3 The video is unlisted, but if you go to any of your matches and click the View link, it will take you right to the video to the correct spot.
@AudioDud3 We couldn't put the order 3D print feature in the Amazon Kindle version because it violates Amazon's terms of use. You will need to use a different version of the game (Steam, GOG, Humble, iOS, or Google Play).
Make sure you are using a proper text editor that isn't introducing any rich text into the file. Try using Sublime Text or Xcode to edit the XML. Alternatively, use Fine Tuner of Overload mods for your XML modding needs.
@Tully2001 I know, it's getting very confusing. Sorry about this. I just did another validation check here at about 2:45PM CST, so if you didn't get a notification this time then your plane is good.
@MechWARRIOR57 @KingDeadshot Ortho is the theme used when taking the "orthogonal" side, front, and top pictures when the airplane is uploaded to the website.
@EarthwormJim Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125
@DandruffCat Part scale did not pass validation: (0.5, 0.7, 1.5) Mass scale did not pass validation: 0.525 Part scale did not pass validation: (0.5, 0.7, 1.5) Mass scale did not pass validation: 0.525 Part scale did not pass validation: (0.5, 0.7, 1.0) Mass scale did not pass validation: 0.35
@Dynamicneedle Part scale did not pass validation: (1.3, 1.3, 1.3) Mass scale did not pass validation: 2.357948 Part scale did not pass validation: (1.3, 1.3, 1.3) Mass scale did not pass validation: 2.357948
Okay, it looks like my validation code was overly strict. I've made a tweak and re-run the validation check. Some of the planes that were in violation are actually okay now. So, this is getting tricky but here's how to interpret this:
If you have not received any invalid notifications then your plane is good.
If you have only received one invalid notification (from about an hour ago) then your plane is also good.
If you have received two invalid notifications so far today, then your plane is not valid.
@EnderWiggin I'm looking into this more now. Looking at your XML, and it doesn't actually look like there's any violations. I'll get back to you on this.
I just checked all the airplanes that have been submitted so far. If your airplane is violating a rule, then you should have received a notification. Lot of part scale violations. If you did not receive a notification, then your current submission is good to go. No news is good news.
@AndrewGarrison Ah, well that should run pretty well then. Is your device low on memory? Have you restarted your device recently? Have you tried uninstalling and re-installing? If you decide to try uninstalling, make sure you back your planes up first!
@Tully2001 Sure, sounds good. I'm sure that will spend some time on the front page as well, so I'll wait until it's off the front page before featuring.
@MasterKiryu Okay, let's get you a print! First step is to contact me via the contact link at the bottom right.
@tuco @IStoleYourMeme That's correct, I'm going through the plats that never got featured and letting them pick a design. Also, this was the first use of the glass technique, you can see that it's from 7 months ago.
I think maybe the missile you tried to launch exploded inside your airplane, causing it to glitch out and basically teleport to a very high altitude.
@NyanCatPlanes Not sure if you are talking to me since you didn't have a name tagged in your comment, but I live in the Midwest, near St Louis.
@ESIOTROT121 You probably mean the Overload mod. You can find it here.
@ESIOTROT121 I use OBS to broadcast to Twitch.
Did you get the game from Amazon? They don't allow purchasing physical goods through an app, so we had to disable that feature for the version on the Amazon app store.
What device are you playing on and what app store did you get the game from? Also, please provide a little more detail as to what exactly is resetting.
I think that fuselage inlets might only support circular when the width or height gets too small. Is this a small inlet?
@AudioDud3 Contact me using the contact link the bottom right of the page.
@adamcurpier Comment on what? The accusations of modding? The plane isn't modded. He played by the same rules everyone else played by.
@AudioDud3 The video is unlisted, but if you go to any of your matches and click the View link, it will take you right to the video to the correct spot.
@AudioDud3 We couldn't put the order 3D print feature in the Amazon Kindle version because it violates Amazon's terms of use. You will need to use a different version of the game (Steam, GOG, Humble, iOS, or Google Play).
@DandruffCat Okay. Well, make sure you are using plain text mode in Text Edit.
@AudioDud3 which match is not showing up?
Make sure you are using a proper text editor that isn't introducing any rich text into the file. Try using Sublime Text or Xcode to edit the XML. Alternatively, use Fine Tuner of Overload mods for your XML modding needs.
Congrats to @KiNo for winning the tournament! Please contact me via the contact link at the bottom right and we'll work on getting you a 3D print.
Thank you everyone for competing, and I'm sorry to all of those who had to watch the AI smash your beautiful airplanes (and hopes) into the ground.
@BrianAircraftsNew @Tully2001 the plane I made on that fateful night didn't actually look anything like this plane. This is just a tribute.
@GrumpyRacing I knew I was in trouble when I saw that I was matched up against you!
@Tully2001 To the greatest plane in the world. I had built the greatest plane in the world, but I lost it, so this is just a tribute.
I just ran another validation check at 10:50am CST. If you did not receive a notification then your plane is good to go.
@AudioDud3 Yes, I stream it on Twitch.
@BaconEggs Are you using any mods?
@Tully2001 I know, it's getting very confusing. Sorry about this. I just did another validation check here at about 2:45PM CST, so if you didn't get a notification this time then your plane is good.
@MechWARRIOR57 @KingDeadshot Ortho is the theme used when taking the "orthogonal" side, front, and top pictures when the airplane is uploaded to the website.
@Typhlosion130 You can use the Overload mod.
@EarthwormJim Your plane is good now.
@Racrandall I'd like to go back to car races after this and finish them up and then maybe the next airplane race can be Unlimited Class.
@SuperSanic why do you say that?
@Hockeygoalie21 Within a couple hours of the deadline, yes.
@humangrenade I'm not sure what you're talking about.
@EarthwormJim Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125 Part scale did not pass validation: (0.5, 0.5, 0.5) Mass scale did not pass validation: 0.125
@EnderWiggin no problem, I'm glad you asked because I was able to fix a bug so the validation should work a little better now.
@DandruffCat Part scale did not pass validation: (0.5, 0.7, 1.5) Mass scale did not pass validation: 0.525 Part scale did not pass validation: (0.5, 0.7, 1.5) Mass scale did not pass validation: 0.525 Part scale did not pass validation: (0.5, 0.7, 1.0) Mass scale did not pass validation: 0.35
@Dynamicneedle Part scale did not pass validation: (1.3, 1.3, 1.3) Mass scale did not pass validation: 2.357948 Part scale did not pass validation: (1.3, 1.3, 1.3) Mass scale did not pass validation: 2.357948
@Meltingvenus1999 Sorry, but I can't help you with that.
@Alienbeef0421 nope
@Hockeygoalie21 No, unfortunately no way to validate your planes yourself.
@Meltingvenus1999 your plane is okay now.
@Justakidwithadream Yes, it looks like EUCL3D does ship to Kenya.
@Hockeygoalie21 Only takes a few minutes. It's automated.
Okay, it looks like my validation code was overly strict. I've made a tweak and re-run the validation check. Some of the planes that were in violation are actually okay now. So, this is getting tricky but here's how to interpret this:
@EnderWiggin
@EnderWiggin I'm looking into this more now. Looking at your XML, and it doesn't actually look like there's any violations. I'll get back to you on this.
@EnderWiggin It has several scaled parts in it. Did you use Fine Tuner? Make sure you don't use the scale feature in Fine Tuner.
I just checked all the airplanes that have been submitted so far. If your airplane is violating a rule, then you should have received a notification. Lot of part scale violations. If you did not receive a notification, then your current submission is good to go. No news is good news.
@AndrewGarrison Ah, well that should run pretty well then. Is your device low on memory? Have you restarted your device recently? Have you tried uninstalling and re-installing? If you decide to try uninstalling, make sure you back your planes up first!
@RAF1 you're welcome! thanks for making awesome stuff!
@AeroMobilFlyingCar Everything @realluochen9999 creates deserves a feature.
looks good