No Tags
This is a simple drone. All it can do right now is spin, no tilting yet. Comment if you figure this out!!!
Specifications
General Characteristics
- Successors 1 airplane(s) +7 bonus
- Created On iOS
- Wingspan 19.7ft (6.0m)
- Length 24.7ft (7.5m)
- Height 6.6ft (2.0m)
- Empty Weight 4,120lbs (1,869kg)
- Loaded Weight 4,901lbs (2,223kg)
Performance
- Horse Power/Weight Ratio 0.408
- Wing Loading 33.7lbs/ft2 (164.7kg/m2)
- Wing Area 145.3ft2 (13.5m2)
- Drag Points 6061
Parts
- Number of Parts 62
- Control Surfaces 12
- Performance Cost 257
@PlanePerson765 np
@Milo1628xa thanks dude
https://www.simpleplanes.com/a/Uf71q9/Drone-Working
@Milo1628xa ok, thanks!!!
@PlanePerson765 the site will give you a message saying that I made an other version of your creation. others can see that it came from your original craft so crediting isn't needed. ill put the link on here if needed
@Milo1628xa that would be great! Make sure you credit me though. Thanks!!
if you want I can make a working version of it :)
its easy once you know how it works:
-1 gyroscope is needed
- wings are not needed
- steering works with the gyroscope, you have to change the settings of the gyroscope in order to make it work properly.
due to the fact that you used 4 blocks in the center of your drone you cannot put the gyroscope in the middle, which is a must. the settings of the gyroscope goes by the following (do keep in mind you can change those settings differently and it will still work roperly as long as you put the settings around the following:)
- gyroscopic speed: 100
-gyroscopic stability: 100
- pitch: around 20
- roll: around 20
- yaw: around 50
these settings can be different depending on how heavy the drone is, how stunty you want your drone to be, and maybe also the size of the drone