this is an experimental build to test air-ride customizable suspension

So this is just a small experiment to make an air-ride suspension in simpleplanes. I just did the frame so that if you want to make your own vehicle with this air-ride suspension you can.

what I did

I put two hinge rotators, and this is what raises the suspension and lowers it. The only part that gets raised is the wheel itself. The first rotator raises it and the other one keeps the wheel level with the ground. The system works very well and is cool to watch. You can alter the speed of it by adjusting the speed of the rotator. I'm telling you how I did it because the suspension on this is pretty bad ( I'm not good at suspensions) but the overall concept works well. Fully lowered it raises it up about a foot. The concept works well and I'm going to come out with something using this concept ( maybe a 63 impala lowrider, but it wont look anything like a 63 impala).

controls

Vtol- raise and lower the suspension ( up to raise down to lower see images below)
Throttle- throttle
Brake-brake
Yaw- for turn

gallery

Raised

Lowered

thanks to those who upvote, comment, and follow

papakernels 12/5/2020

(Tell me if you would use this for one of your car builds. Also if you do use this tag me on your build so I can see it used!! :D)