Auto Credit Based on Jundroo's Wasp
FREE TO USE!
Default to deploy by Ag1
About:
- Adjustable funky tree input, engage-disengage freely.
- Adjustable smoke size.
- Won’t explode.
. - It costs fuel.
- Unable to use when Roll angle or Pitch angle is too big.
- Unable to use when brake is activated.
- White smoke only.
- It's noisy.
How it works:
The car engine keeps the wheels steering, wheels hit the car engine and generate smoke. Piston is to reduce shake.
Installing instruction:
- Scale it, if you need to change the smoke size.
- Save as an assembly.
- Attach (the engine) on your aircraft.
- Selet engine for two wheels.
- Rewrite the inputs of two rotators.
- Rewrite the input of the car engine. (You can keep it active but it costs fuel)
Uses
Specifications
General Characteristics
- Predecessor Wasp
- Created On Windows
- Wingspan 30.1ft (9.2m)
- Length 40.9ft (12.5m)
- Height 13.3ft (4.1m)
- Empty Weight 14,162lbs (6,424kg)
- Loaded Weight 18,886lbs (8,566kg)
Performance
- Power/Weight Ratio 3.569
- Wing Loading 54.7lbs/ft2 (267.1kg/m2)
- Wing Area 345.3ft2 (32.1m2)
- Drag Points 2868
Parts
- Number of Parts 49
- Control Surfaces 8
- Performance Cost 453
@WIZARD2017 Go & Edit Brake Torque Of Each Wheel, Then It Will Work When Brake Is On
@WIZARD2017 thx
Nice idea@MrCOPTY
@WIZARD2017 hm, didn't know that
When you install it as assemblies the selection will disconnect automatically
@MrShenanigans2020
@WIZARD2017 oh ok, cause when I downloaded it, it already had the wheels connected to the engines in the settings
select wheels after you install this on your plane.
@MrShenanigans2020
check the instruction in the description.
you need select wheels in engine's setting, so the engine can power the wheels.
@MrShenanigans2020
@WIZARD2017 you mean connect the wheels to the engines so that they move?
you need to select wheels in engines
@MrShenanigans2020
Hey uh @WIZARD2017 the smoke generator does not work when I put it in the sub assembly and then put it on a nother aircraft, I do not know why
@WIZARD2017 small question about the Gforce in SP is by putting an input examp GForce>3 does that mean 3G's IRL?
Oh ok @WIZARD2017
whole@MonsterAvgeek
What part do you scale?
I’ve try this idea, check this. Su-47 is a forward-swept-wing aircraft so the vortex will leak from the wing root.@FireFast212
ooooo i have a great idea! how about, the smoke is on each wingtip and is activated when the plane rotates fast enough? we could use g-force sensors for the input. it would look great on stuff like SU-35 or F-22s! maybe you could create a quick proof of concept? :)
@WIZARD2017 ok
You can read the intalling instruction in the description to know how.@FireFast212
Sure, that's what this for.@FireFast212
is it possible to have the smoke get activated from throttle, or a specific airspeed, instead of activation groups?
@hfusiwjf29 How Does it feel having the most upvoted plane on the site?.
It’s difficult to make input for the rcn.@hfusiwjf29
Awesome! I had tried to make smoke by rcn, but the effect was terrible...
Thank you thank you so much your the best