F1 challenge
Goal
design a formula 1 car that meets the following specs and will compete and win a grand prix around 3 tracks: motor mirage, airstrip drag, gold prix. Good luck
Rules
Must be successor to this post and either a replica or original
Front wing that does not exceed the length of the suspension or end of tyres
Rear wing no wider than the rear tyres
V8/V10 engine or V6 turbo
Bodywork no wider than 4.5 fuselage units, and a floor no wider than 5 units, the length of the floor and diffuser may be no longer than 7.5 units
May be no taller than 4 fuselage units.
Must be 175 parts minimum and 300 maximum
Engine may output no more than 650HP and must be rear wheel drive
XML is allowed as long as it does not create an unfair advantage: no messing with slip asymptotes and extremums or infinite fuel or brake torque.
Prize
1st: 10 upvotes+spotlight if possible
2nd: 8 upvotes + spotlight if possible
3rd 5 upvotes+ spotlight if possible
Will be judged on
Speed: 5pts
Agility: 5pts
Looks: 5pts
Time around gold prix: 2pts
Position in The Grand prix: 9pts
Grand prix race points
9
6
4
2
1
0
Challenge closes 1/1/2021
Race results 1/7/2020
Specifications
Spotlights
- Mage2IsTriggered 3.3 years ago
General Characteristics
- Created On iOS
- Wingspan 8.2ft (2.5m)
- Length 4.9ft (1.5m)
- Height 9.8ft (3.0m)
- Empty Weight 806lbs (366kg)
- Loaded Weight 806lbs (366kg)
Performance
- Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 6534
Parts
- Number of Parts 15
- Control Surfaces 0
- Performance Cost 37
Ill definitely participate, or at least, try to.
Im only doing this bcause ive been making a few F1 cars, and they all have similar performance, so i want to see the skill of others@EternalDarkness
Finally, a challenge with a proper thumbnail. It's not every day that I see one of these. Good luck with it.