No Tags
s
Specifications
General Characteristics
- Successors 4 airplane(s)
- Created On Android
- Wingspan 34.2ft (10.4m)
- Length 27.1ft (8.3m)
- Height 9.2ft (2.8m)
- Empty Weight 6,730lbs (3,052kg)
- Loaded Weight 8,560lbs (3,882kg)
Performance
- Power/Weight Ratio 0.787
- Wing Loading 58.6lbs/ft2 (286.3kg/m2)
- Wing Area 146.0ft2 (13.6m2)
- Drag Points 2609
Parts
- Number of Parts 46
- Control Surfaces 5
- Performance Cost 277
@Destroyerz117 oh thats because it used to be a helicopter
@MrVaultech thank you
@Destroyerz117 ya you are
@Destroyerz117 thank you
@Destroyerz117 yup
@MrVaultech thanks
@Destroyerz117 thanks
@Mobius1Cyka thank you so much
Made a flyable version heres the link: https://www.simpleplanes.com/a/7sNaD0/planey-flyable
but yeah as i was saying, auto orientation is a setting for the gyroscope, this is for things like quad copters and basically it makes sure your vehicle is completely straight in the air, this is a problem when you take roll into account since the best method of turning a plane is to roll and then pitch so you end up fighting against auto orient and your plane spins out, this isnt a problem if you disable it in the gyro settings.
Another tip is that mass(your coM) should generally always be in front of your lift(coL) you can view these with a toggle inside the designer there also a few guides built into the game that run you through the basics.
Hope this helps
battle of the planeys
Done
working planey
your only real issues were that you had the center of mass behind the center of lift, I ended up changing a few things before i realised it didnt fly because you had a gyroscope with auto orient turned on which would make the plane spin out whenever turning
I tried my best, but it's best not to use the gyroscope in it. Just be careful of tight manoeuvring at lower altitudes, since it still likes to stall
your on