The ARC-170 Starfighter was a fighter spacecraft developed by the republic and is the predecessor to the famous X-Wing Starfighter.
Because the ship itself is not too detailed and many of the details are on moving parts and therefore very difficult to build, I was left to put most of the effort into the engines.
Controls/Advice:
AG8 + throttle for vertical takeoff, control in the air with Pitch/Roll. Then activate 1 for main thrust and put the VTOL slider up. retract the landing gear. Now you can De-activate 8 so you can use the VTOL slider freely. AG2 + VTOL for rear turret rotation (also activates the engine flames). ou can also trim it to fly perfectly straight.
Specifications
General Characteristics
- Created On Windows
- Wingspan 51.2ft (15.6m)
- Length 29.3ft (8.9m)
- Height 6.8ft (2.1m)
- Empty Weight 13,784lbs (6,252kg)
- Loaded Weight 13,784lbs (6,252kg)
Performance
- Power/Weight Ratio 11.249
- Wing Loading 47.0lbs/ft2 (229.5kg/m2)
- Wing Area 293.3ft2 (27.3m2)
- Drag Points 4401
Parts
- Number of Parts 469
- Control Surfaces 4
- Performance Cost 1,462
@WahrscheinlichIch the issue is they're not tied to anything to walk them in place. So when you turn the back gun your wing flaps move also. Great job by the way I can tell you took a long time on it.
@Flash0of0green I thought about that, but I wanted you to be able to move them seperately...
@WahrscheinlichIch you should have maped the wing foiles to landing gear.
You're very welcome.@WahrscheinlichIch
@MTBCrafter ist ganz nice, weil fuselage immer auf mind. einer Seite vier Ecken haben müssen, sodass man diese Form nicht ohne weiteres nachbauen kann.
Danke ^^
@Maxwell1 thank you
Wow, sieht echt cool aus 👍
Is ne gute Idee die Modul Cockpits als Ecken zu benutzen :P merk ich mir XD
This is simply amazing!