I'll go straight to the point: The suspension doesn't work. I've simplified it, made it more complex, tried different setups, and nothing.
I'm here asking for help to make it work. Any help would be great but if you do the list of stuff i want with the fix, ill give you 5 upvotes as thanks.
List:
-Must look at least decent
-Must not mess with the chassis
-Must work like a real suspension, using shocks
-Must be soft but not allow the car to bottom out
-Must be low part
I know it's not cool being this demanding, but i want this car to work well. Again, any help would be great.
Thanks in advance!
P.s: If you can set calculateDrag = False too, i'd be grateful
Specifications
General Characteristics
- Successors 2 airplane(s) +10 bonus
- Created On Android
- Wingspan 9.4ft (2.9m)
- Length 18.5ft (5.6m)
- Height 4.5ft (1.4m)
- Empty Weight 5,084lbs (2,306kg)
- Loaded Weight 5,242lbs (2,378kg)
Performance
- Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 2293
Parts
- Number of Parts 85
- Control Surfaces 0
- Performance Cost 526
@IssaIwan ill try that, hopefully it will work. Ive used similar suspensions in the past and they have worked tho
Edit: Thanks for the help, i had to also remodel the suspension a little bit. Ill get you your 5 upvotes. Thanks
I believe the problem with the suspension is the wheels being slightly too high and the questionable beam connecting the wheel to the main chassis. Also the hinges are useless, since the other end of the moving part is fixed to the support, resulting in no rotation. This issue could be fixed by adding hinges on the end of the shocks.