Profile image

A-3 Striker Kai

40.1k kpfpz70m933  25 days ago
208 downloads

DESCRIPTION

I have modernized the Fw PIII I made last time! I have added a glass cockpit, an air-to-air refueling system, a targeting pod, auto-trim, a ground proximity warning system, and a RWR, and I have also strengthened the engine output!

JET Swallow

CockPit interior

Instruments are arranged in a simple and easy-to-read manner
The cockpit has been changed from a conventional type to an LCD panel and is also equipped with a HUD.
JET Swallow

OPERATION EXPLANATION

Activate1: Open Canopy

Activate2: Position Light

Activate3:GPWS

Activate4: Ejection Seat

Activate5:LeftEngine cut

Activate6:RightEngine cut

Activate7:Weapon Saftey

Activate8: Fuel/Oil pressure cut

LandingGear:Gear UP/DOWN

VTOL:Flap

Weapon

Gsh-1-30

JET Swallow

XAGM×2

JET Swallow

Bomb×2

JET Swallow

Guardian×2

JET Swallow

CounterMeasure×16

JET Swallow

Fictional History

The FW Piii was originally an enlarged version of a prototype jet fighter developed towards the end of World War II, but it had some problems with its use as an attack aircraft, such as its small payload and limited range, so the A-X Turbo Striker was developed as a more serious attack aircraft, and it was planned to be retired to replace it, but the Turbo Striker was a single-engine turboprop attack aircraft that far exceeded the Piii in most aspects, such as payload and range, but the Piii was far superior in speed and maneuverability. Initially, the Turbo Striker's low speed and maneuverability were not considered a problem, but claims began to be made that it had low survivability, so a jet Striker with higher speed, higher payload capacity and range was developed, and the A-3, a modernized P.III, was developed as a stopgap until then.

Please try playing if you like!

General Characteristics

  • Created On iOS
  • Wingspan 34.4ft (10.5m)
  • Length 37.2ft (11.3m)
  • Height 11.4ft (3.5m)
  • Empty Weight 10,874lbs (4,932kg)
  • Loaded Weight 12,919lbs (5,860kg)

Performance

  • Power/Weight Ratio 0.913
  • Wing Loading 70.3lbs/ft2 (343.3kg/m2)
  • Wing Area 183.8ft2 (17.1m2)
  • Drag Points 2161

Parts

  • Number of Parts 335
  • Control Surfaces 6
  • Performance Cost 1,834