Profile image

Prowler Dropper

26.9k Sunnyskies  7.7 years ago
9,007 downloads
Auto Credit Based on Sunnyskies's Prowler

A new experiment combining my previous works Prowler, and Blastwave. This is a disposable transport platform designed to airdrop tanks. The tank is bolted to a cage, which in turn is mounted to the slender airframe. The landing gear is located on the feet of the cage, which also cleverly double as shock-absorbers for the airdrop.

To airdrop, fly to your desired landing site. Once ALMOST over your target, press AG1 to drop the cage. Do this at about 5 degrees pitch to mitigate tumbling.
DO NOT engage parachutes right away, instead wait a short while for airspeed to bleed off, then press AG2 to deploy parachutes. Once in the descent phase, ensure the landing gear is EXTENDED, or you might not survive the landing. Also, be wary of the now loose and out of control plane you just left behind. I once had it loop back and hit me. You'll fall at around 35 mph, so you should land unscathed.
Once on the ground, cut away the parachutes with AG2, and brake to a stop, then retract the landing gear so you are resting on the cage. Then press AG6 to break apart the cage, freeing the tank.
The tank can now be driven with pitch and roll. Turret is operated with VTOL and Trim. Shake the turret around to get rid of any pieces of the cage that may have stuck to you. All the other tank controls are the same as the original Prowler.

General Characteristics

  • Predecessor Prowler
  • Successors 6 airplane(s) +21 bonus
  • Created On Windows
  • Wingspan 80.4ft (24.5m)
  • Length 82.6ft (25.2m)
  • Height 34.8ft (10.6m)
  • Empty Weight 27,005lbs (12,249kg)
  • Loaded Weight 31,063lbs (14,090kg)

Performance

  • Power/Weight Ratio 4.34
  • Wing Loading 27.7lbs/ft2 (135.5kg/m2)
  • Wing Area 1,119.7ft2 (104.0m2)
  • Drag Points 23384

Parts

  • Number of Parts 270
  • Control Surfaces 5
  • Performance Cost 1,748
  • Log in to leave a comment
  • Profile image
    315 Cyblox12

    Keep up the good work

    3.4 years ago
  • Profile image
    315 Cyblox12

    I like it

    3.4 years ago
  • Profile image
    26.9k Sunnyskies

    @Flyboy360 Thanks.

    6.6 years ago
  • Profile image
    26.9k Sunnyskies

    @Synthex4060 Glad you like it.

    6.9 years ago
  • Profile image
    8,548 Synthex4060

    Oh I love those kind of thing. I actually already have a droppable vehicle, but haven't made a succesful drop-ship for it yet.

    6.9 years ago
  • Profile image
    88.5k Kerbango
    7.5 years ago
  • Profile image
    26.9k Sunnyskies

    @Kerbango Interesting. @ me when you finish it.

    7.5 years ago
  • Profile image
    88.5k Kerbango

    @Sunnyskies i am working on a similar idea but with a jet on a booster stage. It should be done tonight or tomorrow morning.

    7.5 years ago
  • Profile image
    26.9k Sunnyskies

    @Kerbango I never meant for mine to be so popular. Had I known, I would have made the delivery plane less ugly. Now 2581 people have it.
    Thanks btw!

    7.5 years ago
  • Profile image
    88.5k Kerbango

    Same idea totally different concept. Yours is great!

    7.5 years ago
  • Profile image
    26.9k Sunnyskies

    @SergioGT Thanks

    7.6 years ago
  • Profile image

    This is great!

    7.6 years ago
  • Profile image
    713 FireNut58

    @Sunnyskies o ok

    7.6 years ago
  • Profile image
    26.9k Sunnyskies

    @FireNut58 ??? They are all on the same group (AG2). I just listed the step for detaching them for the sake of comprehensiveness.

    7.6 years ago
  • Profile image
    713 FireNut58

    i woudl like to point out now u dont need the seprate group to detach the parashoots becase if ya deactivate teh group there in they will cut of automaticly =-)

    7.6 years ago
  • Profile image

    Ohhhhh, ok now I see it. Once again thanks @Sunnyskies

    7.6 years ago
  • Profile image
    26.9k Sunnyskies

    @Unreliablewaffle365 Good Idea with the camera, but the engines are mostly a non-issue since the tank doesn't need to be throttled up to work (engines are throttled with pitch). All you need to do is cut throttle before you deploy the cage.

    7.6 years ago
  • Profile image

    1 other thing you might want too add. It would be a good idea to add an orbit camera on the actual plane itself. Also having the engines shut down after detach will be great to save precious fuel from being lost.

    7.6 years ago
  • Profile image
    1,698 DEATH2REVIVE

    Thank you for the parts@Sunnyskies

    7.6 years ago
  • Profile image
    26.9k Sunnyskies

    @DEATH2REVIVE LINK These are modded to behave the same way as the Prowler's
    @Unreliablewaffle365 Not that I am aware of. I use PC. Best way to get modded parts is to pull them off of other people's planes and save them as a subassembly. I posted a link to some modded guns above.

    7.6 years ago
  • Profile image
    1,698 DEATH2REVIVE

    Can you please edit a wing gun and a. Gatline gun to make its bullet weight to the max. Also can you lower the firing rate please reply

    7.6 years ago
  • Profile image

    K thx but how do u do that on iOS ?
    @Sunnyskies

    7.6 years ago
  • Profile image
    26.9k Sunnyskies

    @Unreliablewaffle365 Edited bullet weight in the XML. If the bullets are heavy enough, they smack things with enough momentum to send them flying. Also allows it to destroy the bridges.

    7.6 years ago
  • Profile image

    Holy S* bro this is freaken sick. Love it love it love it...
    Ps. Plz tell me how you did that primary turret. I love how it makes aa tanks and trucks fly sky high.

    7.6 years ago
  • Profile image
    26.9k Sunnyskies

    @Phillipsosophy I actually toyed a lot with the fuel. Putting it in the plane made it so when the tank was separated, it lost all access to that fuel, leaving the tank empty on fuel and useless. So I had to put the fuel in the tank itself. But too much fuel made the tank too heavy to drop. Fuel is the major challenge to building something like this.

    Also, thanks!

    7.6 years ago
  • Log in to see more comments