Note: If you have problems with the plane jerking left, click the link below for a fixed version
Click here for the version without the red power flag
if you would rather a more visually accurate version using funky trees, click the following link(definitely recommend)
Funky Trees Attitude Indicator
It's a little finicky but it is as accurate as I can make one.
Group 8 for battery on/off
The box around the edges is the base.
Because it has a lot of moving parts that SimplePlanes will want to automatically connect, make sure to manually attach the base and nudge the instrument into position from there when installing.
If you use this in any one of your shared aircraft, please comment a link so I can see it! I’d love to see what you do with it.
No credit required
Specifications
Spotlights
- destroyerP 4.4 years ago
General Characteristics
- Successors 3 airplane(s)
- Created On iOS
- Wingspan 32.1ft (9.8m)
- Length 21.2ft (6.5m)
- Height 11.1ft (3.4m)
- Empty Weight 3,308lbs (1,500kg)
- Loaded Weight 4,635lbs (2,102kg)
Performance
- Horse Power/Weight Ratio 0.647
- Wing Loading 23.1lbs/ft2 (112.8kg/m2)
- Wing Area 200.6ft2 (18.6m2)
- Drag Points 912
Parts
- Number of Parts 49
- Control Surfaces 5
- Performance Cost 309
@Thorne i found a creatipn with a speed indicator and i used it and it works you just cant tell the speed tho cause the faster you are it will just keep turning thanks tho all tho i cant download the plane
I would try IAS and divide it to match whatever angles you need like IAS/4 or something like that ; I’ve also got an example here if you need it, it’s hard to get to the airspeed indicator rotator on the panel but when you do it’ll show you the formula I use @MrShenanigans
Is it possible to make a speed indicator cause if it is i dont know how i even tried TAS>5
@Thorne yeeaahh.
It’s sassy@MrPorg137
@Thorne It's an indicator with attitude.
Probably, I was planning to give it a shot here soon, I’ll share it for you @nadvgia
Attitude indicator lol, here’s my Altitude indicator @DPSAircraft
Very good indicator. Is it possible to create a Vertical speed indicator?