So I really want to have a car engine that only starts putting power down once I'm at 50% power or higher, or I want it to come on slowly but have a high max power (ie. Has 400hp but comes on gradually). Is there a command like powerDelay or something? I tried putting that in under the Engine tab and the Input tab and nothing worked.
@Minecraftpoweer alright, nothing's working so I'll try some other things. Thanks though!
@DemonSniper8 max, minimum is gor reverse (unless you inverted the engine which you shouldnt fo because there is no need to) anyway gtg now, good luck and if you need help i can try tomorrow because it is twelve twentyfive where i live.
@Minecraftpoweer do I set it as the max or as the minimum?
@DemonSniper8 it will accelerate slower but it will still reach top speed. You do it in input
@Kerbango I'll try that
@Minecraftpoweer trying to figure out how to make power come on with a delay like a turbo. What to I set for 0.25?
just make the input something like 0.25 and it will accelerate 75%slower. Anyway why do you need it to start at 50%? if you explain i can try to come up with something but i might not be able to.
Try doing two engines. 1 with low HP with input set up to .5. And a second engine with High HP and input set above .5. Try that.
@Kerbango yeah I'm doing that, but if I set
Inputto 0.5 power still comes on at >0. I need power to come on AFTER 0.5 and turn off under 0.5, otherwise it won't do what I need it to.Use pitch as your throttle input. This also allows you to go in reverse.
But you can also change the engine input number from 1 to 1.5 or even 2.
@WNP78 not sure if this is possible but I figured you might know how.