@Texasfam04 to operate the gear doors, make sure you have 3 activated and then move the VTOL slider up. It works fine for me, and I just redownloaded it.
Just follow the instructions I gave you. Don't forget that you can manually change the trim by rotating the horizontal stabilizers with fine tuner. It doesn't really matter what engine combination you use if you trim it correctly.
Alright. Just try to centel the middle engine along the plane's vertical center of mass as much as possible and make the engines with the same thrust. If the plane is still pitching down, you can always just rotate the Horizontal stabilizers a little up to correct it.
you can check out my 727-200 advanced. I don't know if you want to build a trijet with two engines in the front, or all three in the back like a falcon 9X/727. My 727 has engines of all the same thrust, and with the middle engine along the airplane's center of mass (vertically) as much as possible. I know you've already seen that, but here is the link for that:
@DisferGoatz My computer screen's colors are broken. it appears as blue and light/dark red for me. Sorry about that. If you want to change it, go ahead.
You guys could check out my 737-300, it uses flaps and slats with two rotators and one piston each. The piston pushes the flap backwards and out of the wing, and the rotator turns it down to look like a real flap. You could even make double or triple-slotted flaps with this design.
Is the landing gear moving at all? Do you have fuselage blocks covering your wings? Do they have rise or run? Are you sure that the rotator is correctly set up?
@EpicPigster1 Thank you! The finished version should be out by the 28th. If you liked this, you should check out my a330-300. I put a lot of work into it and it has over 450 parts and many functions.
@helilover03 Yes, I am currently working on one. I found that the new gyroscope has a lot of cool features like pitch and roll hold, so I used in in the final version of this plane (coming soon).
@Mox Never mind, I got it. Did you like the aircraft though? I am currently working on a gyroscopic autopilot for it, and would appreciate any feedback. (Even negative if you didn't like it so much)
@Texasfam04 to operate the gear doors, make sure you have 3 activated and then move the VTOL slider up. It works fine for me, and I just redownloaded it.
@Awsomur alright, thanks for the help!
@F104Deathtrap alright, thanks.
@F104Deathtrap thanks, but what time do I post at to make sure the most poeple see it as possible?
@Awsomur Thanks, but you still didn't really answer my question. What times do I post at?
All I really need help with is posting times. What are the best times, when the right amount of people are online?
@RailfanEthan Thanks for the concise reply
@FastDan Yes, I see where you're coming from.
@TheLatentImage Alright, but what I'm really asking for is help. At the end of my post, I requested assistance in my overall product and timing.
+1How do you feel about these?
727-200 Advanced
MD-90
I actually put a lot of work into these with the animations including flaps, slats, and reversers (only on the MD-90)
and don't forget to make the middle engine EXACTLY centered or the plane will turn.
Just follow the instructions I gave you. Don't forget that you can manually change the trim by rotating the horizontal stabilizers with fine tuner. It doesn't really matter what engine combination you use if you trim it correctly.
+1Alright then, I will try that. @BaconEggs
Alright. Just try to centel the middle engine along the plane's vertical center of mass as much as possible and make the engines with the same thrust. If the plane is still pitching down, you can always just rotate the Horizontal stabilizers a little up to correct it.
+1you can check out my 727-200 advanced. I don't know if you want to build a trijet with two engines in the front, or all three in the back like a falcon 9X/727. My 727 has engines of all the same thrust, and with the middle engine along the airplane's center of mass (vertically) as much as possible. I know you've already seen that, but here is the link for that:
https://www.simpleplanes.com/a/0s9DQd/727-200-Advanced
+1Please explain or at least state how you got the wingflex to work
@QingyuZhou https://www.youtube.com/watch?v=YuedQFH8wZI
Hey QingyuZhou! If you made this, you might be interested to see this:
https://www.simpleplanes.com/a/Q17m77/MCDonnell-MD-90
I would be able to join, but can someone tell me how to enter my plane?
@DisferGoatz My computer screen's colors are broken. it appears as blue and light/dark red for me. Sorry about that. If you want to change it, go ahead.
@Amaker Thank you!
@DisferGoatz Ok, it's done. I tried to get it right, but I might need some help. Here is the link:
https://www.simpleplanes.com/a/iCk6Ei/Delta-MD-90
@DisferGoatz I could try that. Thanks for the feedback!
If you have any ideas for a livery, let me know!
@AstonMartin145 Thank you!
@F104Deathtrap sorry, don't know how to do that.
+1@TheCreatorandDestroyer99 Thank you.
@EternalDarkness I missed the .jpg lol
@EternalDarkness Thanks, got it.
@EternalDarkness https://imgur.com/a/vPBOQTM
Wings could be reshaped a little, but this is great! Maybe you could add some more realistic gear using rotators.
+1@klm747klm747 https://www.simpleplanes.com/a/S1KCnI/Boeing-737-300
+3You guys could check out my 737-300, it uses flaps and slats with two rotators and one piston each. The piston pushes the flap backwards and out of the wing, and the rotator turns it down to look like a real flap. You could even make double or triple-slotted flaps with this design.
@EpicPigster1 Thanks for the feedback and upvote!
@EpicPigster1 I remembered how much you liked this and wanted to tell you that the final version is complete. Here is the link.
https://www.simpleplanes.com/a/S1KCnI/Boeing-737-300
The final version is out!! Here is the link-
https://www.simpleplanes.com/a/S1KCnI/Boeing-737-300
Thanks!
Is the landing gear moving at all? Do you have fuselage blocks covering your wings? Do they have rise or run? Are you sure that the rotator is correctly set up?
@EpicPigster1 Sorry, I meant my A330-200.
@helilover03 OK thank you.
@EpicPigster1 Thank you! The finished version should be out by the 28th. If you liked this, you should check out my a330-300. I put a lot of work into it and it has over 450 parts and many functions.
Interesting!
@helilover03 Is there?
Is there a way I can give you this plane privately? I don't want anyone else to see the finished (or almost finished) version yet.
@helilover03 If I put livery on it, what do you think it should be?
Thanks!
@helilover03 Yes, I am currently working on one. I found that the new gyroscope has a lot of cool features like pitch and roll hold, so I used in in the final version of this plane (coming soon).
Thank you @helilover03! what did you think about it?
@Mox Never mind, I got it. Did you like the aircraft though? I am currently working on a gyroscopic autopilot for it, and would appreciate any feedback. (Even negative if you didn't like it so much)
@Mox Sorry about that, but I dont know how to make a forum post. (I'm kinda new here)