Slats are being implemented now.
I will put up a download momentarily.
Inboard flaps rotate I think about 50 degrees, I can reduce that to have more backwards throw.
Yes this did happen lol
How to make wingflex:
Divide the wings into three or four parts. Then add rotators between the parts. (The rotators don't need to be bound to any key or even be movable). Then put a wing that creates lift in the winglet. As the plane gains speed, the wing at the end of the fuselage wing will create lift, bending the rotators and allowing the wing to flex upwards.
@exosuit Must be on your end. You can use inspect element to see all the links.
Right click on any image and then click inspect. You can direct access all images from there.
Landing gear- 9
Control Surfaces (Not flaps)- 4
Flaps- 19
Wingflex-6
Engines-4
.
42 Rotators/Pistons actually. (I included pistons because they have the same performance impact as rotators)
@Jetliner101 OOf I'm here if you still need me....
@randomusername Thank you!
+1@Vidal99977
@SelectAKey Thank you!
@DPSAircraftManufacturer Lol fam this is just a fun build
Cruise at 35K.
+1It holds up to ten passengers.
@Subnauticafan1 hah! thanks!
I kept lag down to a minimum by making sure that all of the decorations/interior were not calculating drag.
@SelectAKey Yes parts count is 400 so far.
Windows will take it to at least 600... if it even gets released cuz I'm lazy
@Chancey21
post
Please note that flight dynamics will come after the model has been completed.
It kinda flies though.
@Zoomzoom999 @SelectAKey @BoeyingOfficial @ChiChiWerx @Chancey21
Thanks for the feedback!
Slats are being implemented now.
I will put up a download momentarily.
Inboard flaps rotate I think about 50 degrees, I can reduce that to have more backwards throw.
Yes this did happen lol
@wesley221 Fixed! See sucessors.
@wesley221 um, it should, let me test it now.
@wesley221 Have you tried using the yaw for on ground turning?@wesley221
Looks good!
Tag me plzzzz on anything you post
Why was it featured a whole year late?
Third page of non-airplane in 1 day
Hello! Give me a few minutes.
That looks absolutely amazing for only 49 parts!
Nice!
I was about to comment on how this sounded a lot like that video...
Glad you included that.
How come you never tag me??
+2@exosuit The engines are 1:1 scaled, with a fan diameter of 8 feet. I will be working on the nose though.
@exosuit That is weird.
How to make wingflex:
+5Divide the wings into three or four parts. Then add rotators between the parts. (The rotators don't need to be bound to any key or even be movable). Then put a wing that creates lift in the winglet. As the plane gains speed, the wing at the end of the fuselage wing will create lift, bending the rotators and allowing the wing to flex upwards.
@Vidal99977 Shoulda tagged me
Looks good! You might just want to make the fuselage a little bit smoother (nose and tail transitions)
@exosuit Must be on your end. You can use inspect element to see all the links.
Right click on any image and then click inspect. You can direct access all images from there.
@SubXTribe Don't worry, they'll be coming soon. Within the month.
@exosuit That's weird. Apparently everyone else can see them.
@CrashFighter05 You got that right!
@exosuit Which one?
@T8flightcrafts Thank you! The 747's taken about three days so far, and the smaller plane about 30-40.
@T8flightcrafts @Spacedoge12345plane Thank you! I will tag you.
+1Please tell me you set all the details to calculatedragfalse
@TU134
@Vidal99977 Thank you!
@Vidal99977 oh you mean quingyzhou
@Vidal99977 Thanks! I was actually inspired to make it by your 747!
@Vidal99977 So what did I get wrong then lol
@Vidal99977 Not going to be posted?
@Spacedoge12345plane
@Strikefighter04
@CrashFighter05
@StallFlight
@ACEPILOT109
@BogdanX
@MailboxIsMyGender
@randomusername The good thing is that 80% of the plane is calcuatedragfalse. That adds about 5 fps.
+1@randomusername Here's why so many rotators.
Landing gear- 9
+1Control Surfaces (Not flaps)- 4
Flaps- 19
Wingflex-6
Engines-4
.
42 Rotators/Pistons actually. (I included pistons because they have the same performance impact as rotators)
@Vidal99977
@EternalDarkness
Very nice!
Can't wait for it to be posted!
You mastered the wings and engines!
The logo is good too!
@QingyuZhou Sure! If you aren't going to finish it, at least let us see your work!
Don't let it go to waste!
How many parts is it? I may be able to do an interior for you.
@QingyuZhou You ok?
nvm
@QingyuZhou Ok then...
Is that project cancelled?
Please explain how you fixed the problem @QingyuZhou
Please post the complete Citation.@QingyuZhou
@Vidal99977 It just goes down the nose a tiny bit too far.
@Vidal99977 Wait! Don't take it off! It belongs there!
You might want to make it a little bit smaller, however.
@ACEPILOT109 I Hope so too. Specs are going to posted in a few seconds. (You can decide if your computer can run it)
Mine runs it at 10-12 fps.
@Vidal99977 @Bman01 Thanks for your suggestions!
@TheFantasticTyphoon I'll think about it. Thanks for the suggestion!
@Strikefighter04 Great!