BTW, about your BIO link...
1. You can make a quick link by doing this: [What ever text you wanna show](The Link). It will then look like Ricardo’s plane.
2. The Google doc is private, this it can't be viewed. Go to the share place where you can share the doc with other people, press on the little button on that says ”Advanced” and changed the visibility to ”Unlisted”. This will make it accessible to people with the link.
Sure. @KV1Dynamics First of, @Rodrigo110, he to does cool builds for iOS, wanna check it out. Worth trying. One of his planes is so good someone though he stole it from someone.
@KV1Dynamics I think @ASDFASDF1 is asking if you added anything to it from the original (under the assumption that this is based on someone else's work). Also, U can change your profile picture in settings, but you'll need to create an account on the picture website.
Oh, I see. Thanks so much for the help. I will try this ASAP. Thanks. (Might take a while cause I’m avoiding the usage of my PC because I believe it might have been infected by a virus.
No Probelm. And sorry. I will still try finding a solution. My computer has been acting up lately, so I’ll try completely restarting it. @ChallengerHellcat
Thanks and No Probelm. Could you just actually tell me how to make a part indestructible. I tried but I failed. I tried putting the ”health” value to ”Infinite”, but that put it to ”0”, so I tried some large number, but failed as well. I also tried disabling aircraft collision, but that only block damage from your own craft. Thanks 👍
@ChallengerHellcat I’m afraid I had run into Technical difficulties. I have not downloaded anything in a while, and I tried download the thing you tagged me on but my computer for some reason is not downloading. It is late for me so I’ll try looking into the issue tomorrow. Very sorry for the setback and inconvenience.
Hello,
I tried finding an industructable fuselage, but could not find one, and failed to make one myself. Could you find me one of the ones you were talking about and share me the link, please. @ChallengerHellcat
Wow. Thank you SO MUCH for the advise. This might be all I need. All I really needed to know was were was the center of the designer, which I assume is x=250
y=250
And z=0 from what you told me. Thanks again. Will try ASAP!!! @Tully2001
Also, must additional models be added in a perticular folder (like the map plugin folder)?
@Tully2001 I created this post 4 months ago and still have no response. Seeing your "Simple Designer" series of mods, I was wondering if you could help me with this. But if not, it's completely fine.
Oh hi,
It alright. You deserved more upvotes on that recent plane as well. And I’m not really doing it completely for the upvotes. Thanks for the support. @Rodrigo110
Sure @DonaldDuckje. However, the piston will look weird when activated as the bar will float, but if it’s hidden it should not be a problem. @DonaldDuckje
Sure, but (as I just mentioned to Hexcorpz), read the first line of the description. I can actually maybe do it right now. However, I need a specific size, I don't want to make it to big or to small. @Spectre2520
Ok, but this might take a while (read the title or the first line of the description). I can maybe actually be able to do it today. Can't guarantee. However, it is supposed to be in real life size. Isn't the current size of objects the normal size for them? @Hexcorpz @shatslinger
BTW, about your BIO link...
1. You can make a quick link by doing this: [What ever text you wanna show](The Link). It will then look like Ricardo’s plane.
2. The Google doc is private, this it can't be viewed. Go to the share place where you can share the doc with other people, press on the little button on that says ”Advanced” and changed the visibility to ”Unlisted”. This will make it accessible to people with the link.
Sure. @KV1Dynamics First of, @Rodrigo110, he to does cool builds for iOS, wanna check it out. Worth trying. One of his planes is so good someone though he stole it from someone.
Cool. Really nice work. Cockpit especially. I made a detailed cockpit myself. @KV1Dynamics
Thanks. @stig27
@KV1Dynamics I think @ASDFASDF1 is asking if you added anything to it from the original (under the assumption that this is based on someone else's work). Also, U can change your profile picture in settings, but you'll need to create an account on the picture website.
Of course. @KV1Dynamics
Oh, I see. Thanks so much for the help. I will try this ASAP. Thanks. (Might take a while cause I’m avoiding the usage of my PC because I believe it might have been infected by a virus.
@stig27
No Probelm. And sorry. I will still try finding a solution. My computer has been acting up lately, so I’ll try completely restarting it. @ChallengerHellcat
+1Thanks and No Probelm. Could you just actually tell me how to make a part indestructible. I tried but I failed. I tried putting the ”health” value to ”Infinite”, but that put it to ”0”, so I tried some large number, but failed as well. I also tried disabling aircraft collision, but that only block damage from your own craft. Thanks 👍
Btw, I can XML mod. Proof, I created this thing.
@ChallengerHellcat I’m afraid I had run into Technical difficulties. I have not downloaded anything in a while, and I tried download the thing you tagged me on but my computer for some reason is not downloading. It is late for me so I’ll try looking into the issue tomorrow. Very sorry for the setback and inconvenience.
+1Sure. I understand how it is to be a beginner. @FudgeMuffalo
+1Need help? Do you have the ”overide mod”? @FudgeMuffalo I can do it for you if you would like.
Ok, thank you. @ChallengerHellcat
Hello,
I tried finding an industructable fuselage, but could not find one, and failed to make one myself. Could you find me one of the ones you were talking about and share me the link, please. @ChallengerHellcat
Ok, will do it ASAP. I think I can make it industrucable myself, but I’ll ise the googled one. 👍😉 @ChallengerHellcat
No Probelm @nliwilson
Oh, glad to know. Glad it could help. :-) @Spectre2520
Nice, keep up the hardwork. :-)
+1Ok, thanks. @Tully2001
Wow. Thank you SO MUCH for the advise. This might be all I need. All I really needed to know was were was the center of the designer, which I assume is x=250
y=250
And z=0 from what you told me. Thanks again. Will try ASAP!!! @Tully2001
Also, must additional models be added in a perticular folder (like the map plugin folder)?
@Tully2001 I created this post 4 months ago and still have no response. Seeing your "Simple Designer" series of mods, I was wondering if you could help me with this. But if not, it's completely fine.
Here is your order. @Spectre2520
Yes. Right away. Sorry about that. Had lots of things on my plate recently. @Spectre2520
Ok. Coming up ASAP! @Spectre2520
Lol, I need to use these! @RailfanEthan
That’s not a bad idea. @jamesPLANESii
No Probelm @DonaldDuckje
Here @DonaldDuckje
Sure. Will do ASAP. @DonaldDuckje
Here it is. Sorry for the wait. @Ricardo1818181818
So sorry. Very soon. Things have been busy recently. @Ricardo1818181818
@Ricardo1818181818
Sorry for wait. Should be ready soon.
Ok, will do it ASAP. @Ricardo1818181818
Oh hi,
It alright. You deserved more upvotes on that recent plane as well. And I’m not really doing it completely for the upvotes. Thanks for the support. @Rodrigo110
Maybe. Thx. If I use that I’ll credit u. @jollyJoey
No Probelm @DonaldDuckje
Here @DonaldDuckje
Sure @DonaldDuckje. However, the piston will look weird when activated as the bar will float, but if it’s hidden it should not be a problem. @DonaldDuckje
Thanks for the suggestion, but I don't really want my username in the name. @jollyJoey
I want go design my logo, but I don't even know what to name my company. X-D
Sorry, yea. You know what I meant. @Spectre2520
No Probelm @Spectre2520
Here it is @Spectre2520
Ok, will do ASAP. @Spectre2520
Sure, but (as I just mentioned to Hexcorpz), read the first line of the description. I can actually maybe do it right now. However, I need a specific size, I don't want to make it to big or to small. @Spectre2520
Ok, but this might take a while (read the title or the first line of the description). I can maybe actually be able to do it today. Can't guarantee. However, it is supposed to be in real life size. Isn't the current size of objects the normal size for them? @Hexcorpz @shatslinger
Here it is @DonaldDuckje
Ok, on it. @DonaldDuckje
What do you mean by nr? @DonaldDuckje Did you mean AG (Acivation Groupe)? If so, I can.