@Nerfaddict i think it has the rally axles alredy... Oh and i think i need to pause the ordering till the end of october... Because i'm working on the halloween stuffs you know...
@QingyuZhou you can easily count the lenght of the gold Prix Raceway.
Get a car, make a lap time. Check your average speed. Your time*your speed (meter/second) = the lenght of the road
@Nerfaddict for example the lowrider switchpad is still there, spoilers are there... The other are really car specific stuffs, except the 1.2 engine... That's just old design i havent built another one...
@Phantom051 hmmm... Music is a key element... Anyway i'm gonna send you an invite on this week, and we can talk about it later, because i need to focus on learning right now...
@Phantom051 so i always thought about making commertial/teaser movies for my product cars. Not long ones, around 30-60 second. A driving montage with music... And i thought you could do these for me if you want... Soo if you like the idea, then we can talk about it on discord (if you have)
Oh btw setup: if you build a frame try out the suspension with a gyroscope or a test engine, then build a chassis. When the whole car is ready you can start to set the springs, and hinge angles perfectly. The body's weight can do funny effects with your preset, and nobody wants to work twice on one thing.
@TheCreatorandDestroyer99 it depends on what kind of a car you want to make...
The easy way is a ladder frame, 4 wide and 8-9 lenght is near to realistic scale. The tricky part is the suspension, but it won't be a problem for a standard road car. A vertical placed shock will be fine, and it's pretty easy to build...
The offroad stuffs are a bit different, but vertical or near vertical springs will work here too. The only hard part is if you want to build a drivetrain axle for the rear end... You need more hinges for that and they like to misconnect....
The most difficult is a supercar frame, you need to keep the ride height low, so you may use a pushrod setup. But here every damn part can missconnect with no reason and it's really difficult to set it up perfectly...
@Phantom051 if you liked the early version of the Hopper here's this on with a different hydraulic system... (and i'm planning another lowrider with a brand new hydraulic layout it will be up near halloween)
@CDRxavier good question...
@CDRxavier it's not too late for a halloween themed build!
+1@Spikerya lol yes
@Mustang51 or this
@ThomasRoderick let me see... 11
+1@AdlerSteiner thank you! Yes something ia wrong with the site it was hard to upload it
@randomusername :D
+1@Nerfaddict i think it has the rally axles alredy... Oh and i think i need to pause the ordering till the end of october... Because i'm working on the halloween stuffs you know...
@Nerfaddict as i remember it has two supercharger... But two years ago i didn't made too realistic descriptions, i just wrote things down tbh...
@Nerfaddict Alright
@Nerfaddict nice, but i don't know how does it related to me :D
@Tank6376 first i tryed a bigger fixed wing but it looked odd with this futuristic design..
@Tank6376 ¿por que? I mean who or what needs a wing?
Thrust me, i just almost failed on maths in the high school...
@QingyuZhou you can easily count the lenght of the gold Prix Raceway.
+1Get a car, make a lap time. Check your average speed. Your time*your speed (meter/second) = the lenght of the road
Lol why is it credited to me? :D
@Nerfaddict for example the lowrider switchpad is still there, spoilers are there... The other are really car specific stuffs, except the 1.2 engine... That's just old design i havent built another one...
@Nerfaddict those are out or considered under the custom building method
@Cbennett57 yes go ahead
@Nerfaddict i did, i always do it and it was bad... I saw people writing about this on the forum
Drag beast
@Nerfaddict your stuff is ready but i have issues with the uploading
@Kimcotupan15 not quite, i just read too much about cool retro futuristic concept cars...
+1@Phantom051 hmmm... Music is a key element... Anyway i'm gonna send you an invite on this week, and we can talk about it later, because i need to focus on learning right now...
@Z3RO Thanks for the support! Yes i wanted a diffusor thing, but i needed to cut down the part number, so i took it off...
@munchakoopa it woul'd be fun, but now i don't even have time to build properly...
@LegnaK i'm planning to add Stock color codes for my next builds maybe for this one too....
@Fygaroh thanks!
@Nerfaddict no problem
I don't really know why did i liked this....
@Tank6376 but i cannot give you sneek peak, if i have nothing :D
@Phantom051 so i always thought about making commertial/teaser movies for my product cars. Not long ones, around 30-60 second. A driving montage with music... And i thought you could do these for me if you want... Soo if you like the idea, then we can talk about it on discord (if you have)
@Phantom051 we can talk here for now
@Phantom051 will figure out.... Hey i got an idea...
@Phantom051 oh well.... Ask Spikerya, or DemonSniper, they also have some great stuffs
@Phantom051 no nothing else...
@Phantom051 if you want, i've mentioned you under the Buckie Hopper rebuilded post... But if i'm late with the answer then sorry
@Tank6376 i have nothing yet... Aaand i want to keep it as a suprise.. All i can say i'll make 3 hallowen themed build and all of them will be a car
Oh btw setup: if you build a frame try out the suspension with a gyroscope or a test engine, then build a chassis. When the whole car is ready you can start to set the springs, and hinge angles perfectly. The body's weight can do funny effects with your preset, and nobody wants to work twice on one thing.
+2@TheCreatorandDestroyer99 it depends on what kind of a car you want to make...
+1The easy way is a ladder frame, 4 wide and 8-9 lenght is near to realistic scale. The tricky part is the suspension, but it won't be a problem for a standard road car. A vertical placed shock will be fine, and it's pretty easy to build...
The offroad stuffs are a bit different, but vertical or near vertical springs will work here too. The only hard part is if you want to build a drivetrain axle for the rear end... You need more hinges for that and they like to misconnect....
The most difficult is a supercar frame, you need to keep the ride height low, so you may use a pushrod setup. But here every damn part can missconnect with no reason and it's really difficult to set it up perfectly...
@destroyerP oh i see.. I tryed to make this kind of poished pearl white effect...
... Guess its wasn't the best choice
@Nerfaddict but it doesn't problem if you modify it, unless its a proper remake
@Nerfaddict thanks, but the concept stuff is just for the story you know... It's a full value post....
@destroyerP so do you think it could have a better color?
@Tank6376 the halloween special stuffs...
@randomusername ewww no?
@Griffinthedragon the car or the girl? :D
@Phantom051 ^_^
@Phantom051 if you liked the early version of the Hopper here's this on with a different hydraulic system... (and i'm planning another lowrider with a brand new hydraulic layout it will be up near halloween)
@Phantom051 well thank you very much