I know this is an old post but try these...
floor(smooth(clamp01(LandingGear),0.25))
ceil(smooth(clamp01(LandingGear),0.25))
I forget which goes on which but it’s what I’ve used in the past and it works perfectly.
I can’t actually run this on my potato phone but I managed to download it and I’d suggest losing most of the engines and using xml on the power multiplyer
Bottom of the screen, the one nearest the middle of your screen on the right. There’s a drop down menu, choose “wing” and scroll down til you see “add control surface”. Change it from False to True then go back to the part editor where you can change the wing shape, scroll to the bottom and hit “add control surface “
Download it and fly it, you’ll see why I call it “my take on a twin boom. At 450 mph the rear end splits into 2 and the vertical stabilisers fold inwards to a 50 degree angle which is where the broken tail rudder comes into its own.
@Omega46 the rear rotators between the wheels are set to 20% movement but they’re floppy and controlled by pitch. Again I can’t fly it because of my potato phone so I can only throw guesses at you.
@APilotOfPlanes I downloaded it and angled all 8 back to 355 degrees (from 359) to try get a it to lift to 15 ft but it didn’t help, I just can’t get the thing off the water... I can make the uss beast go 40,000 mph but I can’t get a big rusky boat/ plane thing to lift 15 ft lol.
@APilotOfPlanes I’ll bet there’s someone that can come up with a funky tree that makes the front 8 shut down at a certain altitude and the rear 2 take over.
283 part count works fine on my potato (iPhone 6 (no, not a 6s, just a 6)) and WOW! This plane is awesome. I doubled the power output of the engine because it just wasn’t quite as fast as I would’ve liked but that was merely my preference. Great job
You know what? Everybody’s gotta start somewhere and the plane does look like a plane so here’s an upvote. I don’t know what they’re for for they seem really popular around here 😂
They were all connected when I downloaded it. A couple of things you should do though,
1, go round all the hinges and change the input from VTOL to Disabled, then disable suspension on each individual wheel.
If that’s how you want it to start. Personally I always change to the “sleek canopy” and edit the size. I like 1 block wide, 1 block high and 2 blocks long. I use hollow fuselage under the canopy, edit the shape then use the position editor to sit the canopy more in than on.
I’ve done it and reposted it with your username as the title.
Looks cool and I actually managed to get it about 15 feet off the ground before my potato crapped out! I’ll give it a vote just on looks then.
You got the upvote but next time maybe a warning about the cockpit getting fired off into the distance would be nice lol.
I know this is an old post but try these...
floor(smooth(clamp01(LandingGear),0.25))
ceil(smooth(clamp01(LandingGear),0.25))
I forget which goes on which but it’s what I’ve used in the past and it works perfectly.
@titchbickler123 yeah I noticed, those jet engines are heavy as fck, get rid of some and that 65,000 kg behemoth will be a feather in comparison lol
I can’t actually run this on my potato phone but I managed to download it and I’d suggest losing most of the engines and using xml on the power multiplyer
Bottom of the screen, the one nearest the middle of your screen on the right. There’s a drop down menu, choose “wing” and scroll down til you see “add control surface”. Change it from False to True then go back to the part editor where you can change the wing shape, scroll to the bottom and hit “add control surface “
Try using structural wings, they’re stronger. You’ll just have to use xml editor so you can use pitch and roll.
Download it and fly it, you’ll see why I call it “my take on a twin boom. At 450 mph the rear end splits into 2 and the vertical stabilisers fold inwards to a 50 degree angle which is where the broken tail rudder comes into its own.
@jeckogecko i said if it doesn’t fit the bill to remove it. It’s not 200 parts either but I’m a rebel haha!
It’s ok buddy, you’re not the only one on this site that knows what the movie is. This is awesome!
@SpareParts smatest?
@AWESOMENESS360 from the top down pic above I’d say they’re mounted backwards?
@Omega46 the rear rotators between the wheels are set to 20% movement but they’re floppy and controlled by pitch. Again I can’t fly it because of my potato phone so I can only throw guesses at you.
This is crazy. It’s slow and a complete bitch to fly but I love it!
Can’t you just make the engines lighter rather than redesigning the plane?
Thanks Griffon1crosswind
Thank you SPairforce, billygoatking and Eaports
Cheers 50calchicken. Question, what’s a spotlight?
@APilotOfPlanes I downloaded it and angled all 8 back to 355 degrees (from 359) to try get a it to lift to 15 ft but it didn’t help, I just can’t get the thing off the water... I can make the uss beast go 40,000 mph but I can’t get a big rusky boat/ plane thing to lift 15 ft lol.
@APilotOfPlanes I’ll bet there’s someone that can come up with a funky tree that makes the front 8 shut down at a certain altitude and the rear 2 take over.
Thanks Avataraang
283 part count works fine on my potato (iPhone 6 (no, not a 6s, just a 6)) and WOW! This plane is awesome. I doubled the power output of the engine because it just wasn’t quite as fast as I would’ve liked but that was merely my preference. Great job
@NormalPioneer then I need some more of those upoots so I can get inter web popular!!!
You know what? Everybody’s gotta start somewhere and the plane does look like a plane so here’s an upvote. I don’t know what they’re for for they seem really popular around here 😂
Thank you Gluck.
I actually kinda like the look of it! Not overly keen on how it fly’s though, rolls too fast and pitches too slow.
There’s probably ships in PlayStation games that don’t even look this good! If I could upvote this I would but I’m not allowed cos I’m a noob 😞
They were all connected when I downloaded it. A couple of things you should do though,
1, go round all the hinges and change the input from VTOL to Disabled, then disable suspension on each individual wheel.
If that’s how you want it to start. Personally I always change to the “sleek canopy” and edit the size. I like 1 block wide, 1 block high and 2 blocks long. I use hollow fuselage under the canopy, edit the shape then use the position editor to sit the canopy more in than on.